Intel® Chipset Device Software 9.2.3.1020 For JakeTown and Patsburg
Release Notes
August 9, 2011
Microsoft Windows* 2000 Microsoft Windows* XP Microsoft Windows* XP Professional x64 Edition Microsoft Windows* Server 2003 Microsoft Windows* Server 2003 x64 Edition Microsoft Windows* Vista Microsoft Windows* Vista x64 Edition Microsoft Windows* Server 2008 Microsoft Windows* Server 2008 x64 Edition Microsoft Windows 7 Microsoft Windows 7 x64 Edition Microsoft Windows Server 2008 R2 X64
DISCLAIMER: Information in this document is provided in connection with Intel® products. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppels or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty relating to sale and/or use of Intel products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications. Intel may make changes to specifications and product descriptions at any time, without notice. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Notice: The Intel® Chipset Device Software may contain design defects or errors
described as "known issues" which may cause the product to deviate from expected performance. Current characterized known issues are documented in this update.
Revision History
Date Driver Revision Draft/Changes August 2011 9.2.3.1020 See below
Intel® Chipset Device Software Support
The Intel® Chipset Device Software contains support for the following Intel Chipsets:
• Patsburg and Jaketown • Intel® 5 Series Chipsets • Intel® 3400 Series Chipsets • Intel® 4 Series Chipsets • Intel® 3 Series Chipsets • Intel® 900 Series Chipsets • Intel® 800 Series Chipsets • Intel® Server/Workstation Chipsets Supported Operating Systems
The Intel® Chipset Device Software is validated on the following Microsoft operating systems.
• Microsoft Windows* 2000 • Microsoft Windows XP • Microsoft Windows XP Professional x64 Edition • Microsoft Windows Server* 2003 • Microsoft Windows Server* 2003 x64 Edition • Microsoft Windows Vista* RTM and SP’s • Microsoft Windows Server* 2008 • Microsoft Windows Server* 2008 x64 Edition • Microsoft Windows 7 • Microsoft Windows 7 x64
New Features, Fixes & Changes
Features Added WHQL -9.2.3.1020 – 08/09/2011 Features Added in Alpha 9.2.3.1010 – 02/28/2011 Description Added support for Waimea Bay platform Features Added in Alpha 9.2.3.1010 – 01/14/2011 ID Description 1 Removed Commented SMB from PatCore 2 Fixed spelling of Controller in AHCI and IDE inf files Features Added in Alpha 9.2.3.1009 1 Added 1D41 LPC device Features Added in Alpha 9.2.3.1008 1 Changed ® to (R) 2 3C00 changed to No_Drv for the “A” stepping in order for a BOSD not to occur 3 Removed 3C60 and 3C61 4 Added 1D76 and 1D77 5 Added Audio INF (1D20) Features Added in Alpha 9.2.3.1004 1 Removed commented out Devices from JakeTown.Inf 2 Changed Installer Version to 1.1.32 (Fixes –overall switch and 2nd install of filtered INF files) Description
WHQLed
Features Added 9.2.3.1017 – 06/17/2011 Description
1. Updated Name String on 1D3E 2. Added HECI INF Features Added WHQL9.2.3.1016 – 04/22/2011 Description
WHQLed to 1.6
Features Added in Beta 9.2.3.1015 – 04/07/2011 Description
1. Jaketown name changes 2. Updated Installer with Klockwork scan fixes 1.1.42 3. Updated Official Branding For Patsburg 4. Moved to Installer Label 1.1.36 a. Updated extractdriver function b. Creates MUP.xml (packageversion not correct)
Features Added in Alpha 9.2.3.1003 ID 1 2 3 Description JakeTown.inf: commented out PCI devices 3C00-3C0F Changed 3C88 to 3C90 Added 3C44 QPI Link Added 3CE4 R2 PCIe Features Added in Alpha 9.2.2.1002 Commented out 3C02 from jaketown.inf Features Added in Alpha 9.2.2.1001 Added JakeTown.inf Updated all Patsburg related INF
Software Sightings and/or Known Issues
ID Information 1 After version 9.2.3.1004 B0 must be used (jaketown B0 should be used with Patsburg B0)
intel_dd_inteldp_9_2_3_1020_winsvr_32-64_chg
=============================================================================== Emulex FCoE Device Driver for Windows ===============================================================================
Device Driver Version: 2.70.018
Problems Fixed:
- Fixed sending ABTS continuously to Flogi issue - Fixed reset and link bounce issues for SLI4 FC public loop - Support for ABTS timeout handling for both SLI3 and SLI4 - Fixed loopback test incorrectly dropping the loopback frame in SLI4 - Fixed exchange management issue in SLI4 CT receive path causing array overflow - Fixed firmware version issue following download in link up state - Fixed problem in init_vfi completion handler that stalled fabric login on BE FCoE FW - Fixed problem that caused OCM ELS Echo Test to fail - Fixed the loopback test issue in recovering from error condition - Support persistent link down for SLI4 FC - Fix DFC_IssueDumpMBox to manage request type 3 which includes link select option. - Modified reinitialization sequence following reset to fix discovery failure post type 1 or type 3 reset - Fixed new firmware dump issue
- Fixed problem where LPe-backup identification (no VPD) displays as LP982 - Fixed issue in SLI3 extended IOCB where CSCTL bits in word 10 were uninitialized, causing unpredictable timeout behavior - Fixed initialization-related BSOD by eliminating the queueing of port object to global list - Added backup string for LPem- when VPD is not present - Upgraded maximum number of targets available for device discovery from 512 to 1024 - Fixed problem preventing RWTEST from running in blade environment - Added support for end-to-end authentication - Added support for GetAuthStatus - Added support for new NPIV features available with HBAnyware 4.0 - Fixed problem where IOCTL_INQUIRE_NODELIST failed to return number of discovered targets - Fixed problem where manually initiated firmware dump crashes OS under I/O loading conditions - Fixed problem where topology reset loses discovered target in direct attach configuration - Resolved Menlo diagnostic issue - Fixed BSOD issue when executing loopback diagnostic test - Resolved end-to-end authentication issue for received PLOGI - Fixed BSOD issue when upgrading driver from 2.01a4 using 2.10a0 Tarma kit - Deprecated NetworkOption and TargetOption driver parameters - Added IOCTL support for reading of firmware log - Fixed discovery issue where PLOGI pending state wedged when WWPN-DID mapping was migrated - Fixed problem where general I/O failure occurred following internal loopback diagnostic - Fixed HBAnyware target display issue for greater than 1024 target support - Fixed issue where VPORT loss occurred following reboot with bouncy link or initial link down - Fixed BSOD issue on Autopilot update from 2.10a0 to 2.10a1 - Resolved issue where system memory dump fails with 3 HBA ports on system - Changed range of values for SLIMode driver parameter to include SLIMode = 3 - Fixed issues with array port direct attach in point-to-point topology - Fixed problem where point-to-point PLOGI failure between two initiators occurs intermittently - Added support for MSI-X redirection feature in Windows Server 2008 - Fixed problem with Menlo panic process hang - Fixed problem with end-point-to-end-point authentication - Deprecated HardALPA driver parameter - Enhanced FC8TEST robustness for blade testing - Fixed problem with discovery stall due to external management node login - Fixed BSOD due to collision between LUN reset and HBA port surprise removal - Fixed problem where link state failed to indicate via WMI - Disabled end-to-end authentication feature, per marketing directive - Enhanced the NPIVReadyTest feature to allow the upper caller to test for NPIV supported switch - Added indication in drvinfo ioctl for CNA image request for alternate trace buffer - Modified driver to allow for model description strings of up to 128 bytes - Fixed DTM 1.2 BSOD issues - Added return of per-vport symbolic node name - Diagnostics support is added to the driver - Fixed issue involving failure to see any targets with Fdmi enabled. - Add checking for same password being set for authentication local entity and remote entity - Fix RWTest not multithreaded issue - Remove Multipulse support - Fix Discovery not completed after a switch issue - Fix not freeing up Scsi address with deleting VPort issue - Fix LOGO response handling BSOD issue - Fix BSOD during Hibernation in Win7 issue - Add support for maximum transfer size - Fix link bounce discovery stall problem - Fixed discovery issue for combined target-initiator - Changed Class parameter displayed action type from dynamic to reboot - Fixed Vport reporting issue seen at maximum number of Vports - Fixed FCInfo CT problem discovered on Win7 - Made changes to reduce per-port consumption of non-paged pool - Volatile WWPN doesn't wait for reboot to start activation - Use current WWN after a successful volatile WWN changed - EnableNPIV driver parameter case insensitive - Corrected the discovered port count returned in HBAAPI GetPortAttributes at linkdown - Loop Map call in HBAcmd is not returning the correct values - HBACmd ListHBAs call appears to get hung in certain conditions - BSOD at driver initialization on Win7 IA64 platform at system startup - Enhanced the reading of WWN routine from the firmware at startup - Update to the fix for supporting loopback tests for FCoE - Fix for HBAnyware for setting the HBA into warm start mode - Added SrbTimeout parameter option to limit I/O timeout to 60s - Fix the LUN masking where it failed to mask on system reboot - Fixed not discovering the luns sporadically during storage controller failover testing - Include Mailbox command opcode in 0x2A driver log message - Include Mailbox command opcode in 0xC2 driver log message - Fixed BSOD issue in receiving RSCN without logging into the Fabric - Added driver log tracing in system events for Windows 7 - Fixed 0xD1 BSOD issue during storage controller failover testing - Fixed not reporting correct Link/Port status after initiating change in switch port topology from FL to F - Fixed hbaapi-WMI not reporting correct information - Added new crash dump support for SLI2, SLI3 and SLI4 - Added support for HBA models - Added Support for Persistent Port Disable - Fixed FCTape device not discovered if re-establishing the link closed to the linkTimeout value - Added startup time NPIV Vport creation support - Fixed BSOD when running management app on unplugged FCoE port - Fixed problems in management app communication path between FCoE initiators - Fixed SLI4 RQ completion handler for dropped frame case - Corrected SLI4 EXECUTE_SCSI path in Intx mode to disable command multipathing - Corrected FC discovery FLOGI path to always force FLOGI SID to zero - Changed max_recv value for FCF record in non-FIP mode from 0x5Ac to 0x800 - Fixed problem in pre-initialization that caused OneCommand to display WWPN value of 0 on FcoE ports - Fixed problem where BSOD occurred when authentication is enabled on unplugged FC/FCoE port - Fixed problem where direct attach discovery fails in point to point mode on FC tape drive - Fixed problem where port reset UE occurs in pre-initialization and attempt to log error caused BSOD - Enhanced high performance code path to both minimize for all ops and coalesce on first action execution of memory clear/copy - Opaqued (to the management app) the following driver parameters: EnableFIP and SEfcf; Made FIP enabled the default mode - Additional changes for direct attach discovery issues - PRLI handling issue for FCID migration - Fixed problems with ELS echo test - Corrected SGE formatting issue that caused UE and consequent I/O failures - Changed CIN/CEE DCBX mode determination to be derived from READ_REV - Added WQEC reset logic on per WQ WQE sequence mod 32 non-zero - Fixed failure in performing boot from SAN using FCoE on adapter - Worked around Microsoft concurrent channel BSOD issue - Fixed reset hba port fail with no link issue - Fixed ReadData/WriteData bit is not cleared for FCP Command for SLI4 - Fixed incorrect sub-DriverType is returned for the - Fixed incorrect port type and null fabric name are returned for - Added support for Virtual Link Clear event handling caused by VFC shutdown - Resolved error log code redundancy issue - Resolved CT response WQE format issues - Resolved OS hibernation isue when MPIO load balancing is in effect - Added region 22 support for Flex-10-based non-volatile NPIV configuration - Fixed problem where discovery failed when connecting an HBA port to a switch after system boot - Fixed BSOD issue if EnableNPIV=1 and no link - Fixed not reporting the correct link speed with - Fixed BSOD issue if PLOGI to NameServer fails and OCManager is running - Fixed BSOD issue found when running long term large I/O stress with BE2A2 - Added multiple read FCF record capability - Added force NPIV enable with valid region 22 signature - Fixed problem in creating Vport by using Region 22 on a LightPulse HBA - Fixed XMIT_SEQUENCE64 WQE not setting E_S bits correctly - Fixed loop map BSOD issue - Modified driver to return elxcna as driver name for all FCoE HBA ports - Added performance optimizations for automatic interrupt latency control and complete from build/start i/o - Modified SLI4 mode discovery to suppress ELS response prior to REG_VFI completion - Fixed issue where Flex-10 Vport configuration combined with OneCommand Vport configuration failed discovery on system boot - Fixed issue where VLAN id GE 1002 was not enabled in CIN mode - Fixed firmware download file transfer issue - Fixed problem where discovery fails following a CVL and the port's FCId changes after a new FLOGI completion - Modified WQE format for XMIT_SEQUENCE to leave the XC bit clear - Added informational IOCTL path for per-port QoS bandwith information - Fixed problem where in-band CT command-response cycle looses synch when command times out and resuses same XRI - Fixed problem where CVL recovery stalls if prior CVL recovery was interrupted with new CVL at various points in rediscovery cycle - Redefined scope of EnableAuth parameter to exclude FCoE ports - Fixed problem where discovery fails due to depletion of discovery context during link bounce test - Fixed FCoE crashdump issue with connecting to more than 1 Target. - Worked around MSA crash dump issue. - Added BE3 PCI ids. - Added support for FCoE NPV failover - Fixed BSOD problem when FCoE port UEs with command queue in wait state - Fixed crash dump device selection issue for lightpulse adapters - Added support for FCoE fabric name change on switch reboot sequence - Fixed WWPN ordering issue in OCM port display - Fixed stale keepalive and other discovery issues related to CVL handling - Fixed vport recovery stall on single-pass up-link shut for vport-only up-link - Fixed persistent LUN mask settings issue - Added workaround to SLI4 (e.g. FCoE) unsolicited frame handler to ignore frames (with incorrect DID) misrouted by FCoE switch (SBAX) - Extended program ID copy length to 256 bytes for GET_VPD IOCTL - Fixed problem where invalid FIP fabric selection would not take effect after a port reset - Fixed ADISC-LOGO handing regression introduced by changes on CR099581 - Fixed BSOD in running on Windows 2008 R2 with more than 32 processors system - Fixed Failing to recover from unsolicited LOGO with new PLOGI - Fixed issue found when initializing on 32 processor 32 core platform - Added support for LimTransferSize, which will restrict maximum transfer size - Fixed PLOGI timeout issue when VPI is not updated with new MAC for FCoE - Fixed problems causing BSODs when scaling to large processor (>32) configurations - Added driver parameter for limiting max transfer size to 64K, 128K or 256K - Fixed crypto policy association issue - Modified character string for naming - Fixed problem where stale pointer in SRB context could cause BSOD - Added dynamic performace tuning parameters (see parameters file) - Fixed initialization problem when processor count is greater than 32 - Fixed issuing HBA port zeroization mailbox BSOD. - Fixed link down issue with NPIV enabled if multiple initiators in the same zone. - Revised fcp response error handling to explicitly handle and recognize read check error - Fixed NPIV migration issue - Fixed problem with in band WWN discovery via OCM - Upgraded Set KEK IOCTL handling to conform to latest mailbox spec - Fixed initialization timer tick problem that resulted in 0x7B bugcheck when booting from SAN - Fixed problem where LUN became inaccessible during Hazard test - Modified FLOGI completion to add RATOV delay when fabric name or ID changes with no clean address - Modified Abort completion notification to reset nport login if abort to target times out - Fixed BSOD when LUN reset was issued with pending passthrough command on FCoE port - Fixed issue in queue full and busy error handling where data transfer length is zero on retry - Fixed issue with discovery on combined initiator/target where LUN discovery failed to happen - Fixed zeroization BSOD issue - Fixed key wrapping issue - Fixed NPIV migration issue where LOGO command failed - Corrected bogus VPORT reporting in NPIV management - Enabled Recovery Qualifier Delay - Fixed BSOD during Target Reset if the discovery process is not completed - Fixed displaying Balius firmware version incorrectly - Fixed RW loopback test issue in new balde environment - Removed StorPortNotification ExtendedFucntionTable call - Fixed wrapped key id not being set correctly - Fixed No resource to issue Flogi after running the PHY loop test - Fixed BSOD caused by switching connections between targets - Fixed failing to persistently bind the target with D_ID bind type - Fixed hitting DPC assertion during boot with LPe-HBAs - Added additional retryable error conditions for illegal frame and out of order data - Changed page break count for LimTransferSize to one additional page break on each setting - Added support for - Fixed issue where LUN discovery failed on vport when LUN is on a Boot From SAN target - Added support for BE3 write performance enhancements - Fixed tagging and IOCTL issues per testing - Fixed SLI4 SGE offset error for gtr 0x-SGE from Storport - Fixed LUN reset synchronization problem per Microsoft inbox testing - Fixed vport 1 allocation failure on OS boot start - Changed reject reason to command not supported on unrecognized ELS command - Added support for BE3 performance enhancements to crash dump module - Fixed vport creation issue when link transitions to up state after vport creation - Fixed LUN reset BSOD when in SLI2 mode - Fixed WMI CT passthru issue that caused WLK failure - Added multi group MSIX affinitization
QLogic 10GbE PCI Ethernet NDIS Miniport Driver for Windows Release Notes January 07, 2010
This software license applies only to QLogic customers. QLogic Corporation. All rights reserved.
Table of Contents 1. Version 2. Changes 3. Bug Fixes 4. Known Issues 5. Additional Information 6. History 7. Trademarks 8. Notices 9. Contacting Support
1. Version
These release notes describe the changes, fixes, known issues, and release details that apply to 10GbE PCI Ethernet NDIS miniport driver, version 1.0.1.2.
2. Changes
* None
3. Bug Fixes
* Fixed a PCI resource filtering bug
4. Known Issues
* None
5. Additional Information
* None
6. History
1.0.1.2 - 01/07/10 * Fixed a PCI resource filtering bug
1.0.1.1 - 10/25/09 * Fixed a pending TX bug
1.0.1.0 - 10/19/09 * Added WOL support for specific OEM Mezz card. * Added support to wait for NCSI/RMII to stop before doing reset. * Removed code to reset the nic for double CAM hit event.
1.0.0.1 - 07/17/09 * Fixed RSS with Line Interrupt issue
1.0.0.0 - 05/19/09 * Initial release
7. Trademarks
QLogic, the QLogic logo, QLA, SANbox, SANsurfer, and SANblade are registered trademarks of QLogic Corporation.
SANtrack and SAN Express are trademarks of QLogic Corporation.
All other brand and product names are trademarks or registered trademarks of their respective owners.
8. Notices
Information furnished in this document is believed to be accurate and reliable. However, QLogic Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are only for illustrative purposes. QLogic Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.
9. Contacting Support
Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration for assistance. QLogic Technical Support can be reached by the following methods:
Web: http://support.qlogic.com
Email: support@qlogic.com
Support contact information for other regions of the world is available at the QLogic website: http://support.qlogic.com
Copyright 2009 - 2010. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. qlgc_dd_nic_qlge-1_0_1_2_windows_32-64_chg
FCoE Adapter STOR Miniport Driver for Windows
Release Notes for version 9.1.8.26
QLogic Corporation. All rights reserved.
Table of Contents
1. Version 2. Changes 3. Bug Fixes 4. Known Issues 5. Additional Information 6. History 7. Firmware Details 8. Trademarks 9. Notices 10. Contacting Support
1. Version
These release notes describe the changes, fixes, known issues, and release details that apply to FCoE Converged Network Adapter STOR miniport driver, version 9.1.8.26.
This driver package includes API version 1.28.0.73 (QLSDM).
NOTE: Before installing this driver, you must update the Microsoft STORport driver.
This driver requires either Windows Server 2003 SP2 or later and KB932755/KB939315 (or later). You must apply the Microsoft STORport update before installing or upgrading to this version of the miniport driver. For boot installation, use Windows Server 2003 R2 SP2, followed by the KB update.
The FCoE Converged Network Adapter is supported with Microsoft Windows Server 2008, Windows 2008 Core, and Windows Server 2003 R2 SP2.
2. Changes
N/A
3. Bug Fixes
* System freezes after active BNT CEE switch is rebooted. * Adapter management application fails to delete Virtual ports.
4. Known Issues
N/A
5. Additional Information
N/A
6. History
9.1.8.17 - 05/21/09
* Firmware v5.01.03
7. Firmware Details
Firmware is resident on the adapter for Converged Network Adapters.
* FW v5.02.01
8. Trademarks
Accelera, Accelerating Cluster Performance, InfiniCon Systems, InfiniNIC, InfiniPath, InfiniView, QLA, QLogic, the QLogic logo, ReadyPath, SANdoctor, SANsurfer, and SilverStorm are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners.
9. Notices
Information furnished in this document is believed to be accurate and reliable. However, QLogic Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are only for illustrative purposes. QLogic Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.
10. Contacting Support
Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration for assistance. QLogic Technical Support can be reached by the following methods:
(c) Copyright 2009. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners.
qlgc_dd_fc_qlfcoe-9_1_8_26_windows_32-64_chg
=============================================== Change History =============================================== Document Name: Change History Document Status: IBM General Avalibility Document Version: 3.0 Latest Driver Version: 3.0.0.0 Document Updated: 8/04/2011 Product: Brocade FC HBA / FCoE CNA
=================================================
Please visit www.brocade.com/hba for full documentation, additional drivers, and management applications.
Version 3.0.0.0 Fixes and Enhancements: - Added support for Brocade 1860 AnyIO Fabric Adapter (User configurable port mode - FC or NIC or CNA) - Added Fibre Channel 16G Support - Enabled Fabric Assigned Address in Fibre Channel Fabric - Added PF based Virtualization – vHBA - Enhanced CLI, HCM GUI and CIM support in inbox drivers. - Added PF based Virtualization - vNIC - Added iSCSI over DCB Support - Added Multiple Tx Priority Queues Support - Added SNMP Support
Version 2.3.0.3 Fixes and Enhancements: - Enhanced SNIA API to report port speed of 4 and 8Gbps in SNIA format. - Enhanced XIV array interoperability that addresses a data integrity corner case. - Enhanced the transmit path handling in Linux Network Driver to avoid a corner case that could lead to transmit path stall. - Enhanced the Linux Adapter Software installer script to update the initrd with the correct name even when there are multiple copies of the OEM specific initrd(s).
Version 2.3.0.0 Enhancements: - Enabled HP DL120 server to support Boot over SAN with two Brocade HBAs installed. - Improved network driver CPU and performance optimization. - Enabled automated target and LUN discovery of enterprise HDS storage once LUN masking has occurred. - Improved Tivoli interoperability to meet device display requirements.
Version 2.2.0.1 Added capability to handle ADISC frames. Unhandled ADISC use can cause SAN boot failure when booting from IBM storage array.
Version 2.2.0.0 Adds support for bootcode updates to Bladecenter 10G Converged Network Adapters
Version 2.1.0.0 Adds support for bootcode updates to 10G Converged Network Adapters
Version 2.0.0.0 Initial release for 4/8G FC HBAs brcd_dd_cna_3_0_0_0_windows_32-64_chg
=============================================== Change History =============================================== Document Name: Change History Document Status: IBM General Avalibility Document Version: 0.0 Latest Driver Version: 3.0.0.0 Document Updated: 9/04/2011 Product: Brocade FC/NIC/CNA
=================================================
Please visit www.brocade.com/hba for full documentation, additional drivers, and management applications.
Version 3.0.0.0 Initial release for 16G FC/NIC/CNA
Adapter Features - Initial support for Brocade 1867 IBM 16G Mezzanine Fabric Adapter.
HBA - Fibre Channel 16G Support
Fixes and Enhancements: N/A brcd_fw_cna_3_0_0_0-d_win2k8_32-64_chg
=============================================================================== Multiboot Image for QLogic 10 Gb Converged Network Adapter for IBM System x.
* BIOS version 2.13 * UEFI version 3.15 * Fcode PPC version 3.05 * Firmware version 5.01.03 * MPI version 1.35.06
Initial Kit Version 1.00.42
Q8Q10042.BIN contains: ---------------------- * BIOS version 2.11 * UEFI version 3.12 * Fcode version 3.02 * Firmware version 5.01.02 * MPI version 1.35.02 * PXE Boot version 1.03 * NIC EFI version 1.02
================================================================================= Original Release Notes from QLogic...
****************** QLogic BIOS for IBM CNAs(QLE) ************************ Release Notes
QL24rom BIOS Release notes
Rev 1.00 Jan.20, 2005 Initial release. Rev 1.01 Feb.18, 2005 Added code to put Port ID of device in IOCB. Rev 1.02 Mar.28, 2005 Added support for Serial Link Control. Addded code to display slot, bus number and function in CTRL-Q utility. Rev 1.03 Apr.18, 2005 Fixed bug when no drives attached and connected to switch. Added code to reset ISP if ISP is paused when ISR is called. Rev 1.04 June 8, 2005 Fixed bug in CTRL-Q utility that caused adapter id to be displayed at invalid id's. Added code to set Write Protect in Flash Status reg. Fixed bug in CTRL-Q utility where EAX reg was being corrupted by timer interrupt routine. Fixed bug in setting up LUN field in IOCB. Fixed bug in not setting port ID when connected to a switch. Rev 1.05 Sept 27, 2005 Changed code to suppress padding firmware version with leading zero's. Fixed bug in setting data direction flags in IOCB for 'seek command'. Changed code to not count device if device disabled by system BIOS. Fixed bug in setting flash Write Protect. Rev 1.06 Oct. 13, 2005 Fixed bug where anykey could invoke Fastutil. Rev 1.09 Nov. 22, 2005 Changed buffer request size to 2056 bytes for 'Report Luns' command. Fixed bug where GAN_NXT IN_ID was not always being set to zero causing GAN_NXT to fail. Rev 1.10 an. 31, 2006 Added check for optional boot mode flag to allow code to configure 1 drive/port when enabled. Bit 6 of host parameters in NVRAM is set to enable this mode. Fixed bug when Spinup-Delay and link is down. Added code to not display Data Rate option in CTRL-Q for QME2462. Rev 1.11 Feb. 7, 2006 Added support for interrupt polling. This option is controlled by bit 7 of NVRAM Host Parameters and by new Advanced Settings option in CTRL-Q. Rev 1.12 Feb. 21, 2006 Changed format of PnP string to display when Opt Boot Mode enabled in NVRAM. Added check for ELS reject status from Login IOCB. Rev 1.13 Apr. 04, 2006 Fixed bug in not always setting port id for logout IOCB. Changed code to support up to 16 adapters and 16 drives. Rev 1.14 Apr. 17, 2006 Changed code to ignore CLP '_hss' string. Rev 1.15 Apr. 20, 2006 Added code to wait for Login to complete when login pending status detected. Rev 1.16 May. 4, 2006 Fixed bug in not setting up Luns/Target in CTRL-Q. Added code to support Restore Default option CLP string (PCI3.0 BIOS only). Changed timeout value waiting for Linkup status from 6 seconds to 23 seconds. Rev 1.17 June 29, 2006 Added support for restoring defaults using CLP string (Pci3.0 only). Optimized code waiting for Linkup status. Added code to use Memory Map I/O for PCI express. Added code to check for correct Max Payload Size on QLE2464. Rev 1.18 July 19, 2006 Added code to load Nec switch port 1 and 2 pci config regs offset 68h with port 0 config offset 54h value. Fixed bug where task attributes in IOCB type 7 were not always being initialized. Rev 1.19 July 24, 2006 Fixed bug in CTRL-Q utility configuring Luns using Report Luns data when lun list has more lun entries after lun 255. Rev 1.20 Aug 2, 2006 Added code to support QLE2xx. Rev 1.21 Aug 24, 2006 Fixed bug in CTRL-Q cursor positioning for some user input displays. Rev 1.22 Sept 11, 2006 Added support for 'exit' CLP string. Changed CLP string to support new format: 'PermanentAddresses' was changed to 'PermanentAddress. Rev 1.23 Oct 16, 2006 Fixed bug in not setting rc_hba when different adapter types installed in system. Rev 1.24 Nov 29, 2006 Removed Extended Error Logging option from CTRL-Q. Removed code to use Memory Map I/O for PCI express. Rev 1.25 Dec 12, 2006 Added code so that set Defaults only to restores factory setting when value was modified by CLP string Rev 1.26 Dec 20, 2006 Fixed issue with the handling of CLP WWNN string. Also added code to always set firmware nodename optiom when set Default CLP is received. Rev 1.27 Feb. 26, 2007 Added support for Set Capabilities CLP string. Added code to load PLX switch port 1 and 2 pci config regs offset 68h with port 0 config offset 54h value (this is same code used for NEC switch). Rev 1.28 Apr. 12, 2007 Added code to check if need to restore HBA default portname. Added check for command fail status after login cmd. Restored code to read block 0 to determine drive geometry. Added NVRAM option (host_params bit 8) to enable support for HP boot order. Fixed bug in handling CLP Set Capabilities data. Rev 1.29 May. 22, 2007 Restored CTRL-Q Lun per Target option and changed text from 'Boot order' option to 'Controller order'. Rev 2.00 Dec. 03, 2007 Added support for ISP2532. Rev 2.01 Jan. 17, 2008 Added support for 1Gb data rate for 4Gb HBA. Rev 2.02 Feb. 18, 2008 Changed code to clear 'Disable Serdes' flag for CLP string Restore Default. Rev 2.03 Mar. 12, 2008 Added support for ISP8423. Added code to support new CLP 'set capability' spec. Rev 2.04 Mar. 23, 2008 Changed code to not used bit 13 of Host parameters. This avoids potential confict with inbox driver. Rev 2.05 Jun. 3, 2008 Added code to allow 2 min for link to come up when spinup delay enabled. Added code to poll for keyboard status. Removed external Loopback test option for ISP8432. Added check if IO support valid. Added check to CLP set_capablity string for the correct HBA port. Rev 2.06 Jun. 18, 2008 Added support for new CLP 'set capability' serial link spec for ISP2532. Rev 2.07 Sept. 3, 2008 Added additional error message for Verify Disk utility when device does not support SCSI cmd 2fh. Add support for Extended HBA CLP strings. Rev 2.07.6 Sept. 12, 2008 Fixed bug with 'restore netport defaults' when restoring NPIV's. Added code to reset ISP before accessing NVRAM the first time. Rev 2.07.8 Oct. 22, 2008 Added support for IDT PCIe switch Fixed bug in restoring NPIV after updating with CLP. Rev 2.08 Oct. 30, 2008 Removed TEST ONLY from BIOS banner. Rev 2.09 Dec. 02, 2008 Added code to save some pci data. Added new option to Advanced Option menu in CTRL-Q for Virtual Fabric Enable/Disable. Rev 2.10 Feb. 24, 2008 Added support for ISP8001 Added check for INT Polling before updating interrupt controller(PCI3.0) Fixed bug where eax register was being corrupted in nvram_config routine. Removed option in CTRL-Q for Virtual Fabric Enable. Fixed cosmetic bug in displaying selectable boot lun in CTRL-Q utility. Rev 2.11 Apr. 28,2009 Fixed issue with setting up Init FW MB command for using Extended Init Control Block Added option in CTRL-Q utility for Primary FCF VLAN ID for ISP8001 HBA. Added code to check version field of Extended ICB. Added code to correctly identify pci switch on 4 port HBA's. Changed code to suppport Loopback mode with new version of FW. Rev 2.12 May, 15,2009 Changed code to handle HSS CLP vendor id 3 same as vendor id 2. Rev 2.13 July 16, 2009 Added code to save backup copy of VPD/NVRAM data. Rev 2.14 Oct 9, 2009 Changed code to use FS segment register instead of GS in find_device routine. Change code to preserve MSB of WWPN Set Capablity CLP when updating WWPN/WWNN.
Driver Name : Fibre Channel Driver for UEFI Version : 3.33 Date : 5/9/2010 OS platform : N/A FW version : See MultiBoot release notes for FW version. Efiutil Version : 2.86
Table of Contents I. Overview II. Enhancements III. Bug Fixes IV. Known Issues V. Additional Information
I. Overview
The following document provides details of the Fibre Channel UEFI driver version 3.33 Efiutil version 2.86.
II. Enhancements
None
III. Bug Fixes
Driver: * Rename "Reconnect and Exit from Main Menu" HII entry to "Exit from Main Menu".
Efiutil: * Add fix to display new firmware version correctly while updating multiboot image. (ER71468) * Add support for 82xx family in Adapter list. (ER69230)
IV. Known Issues
Driver: * The driver does not support 24xx/25xx based HBAs. * In the HII menus, Adding/Deleting a Target/LUN will require a reboot for changes to take effect.
V. Additional Information
None
******************* QLogic Fcode for IBM CNAs ***************** Release Notes
This software license applies only to QLogic customers. QLogic Corporation. All rights reserved.
Table of Contents
1. Version 2. Changes 3. Bug Fixes 4. Known Issues 5. Additional Information 6. Trademarks 7. Notices 8. Contacting Support
1. Version
These release notes describe the changes, fixes, known issues, and release details that apply to the multi-boot package for the Converged Network Adapter (CNA).
* Reference the Read1st.txt for the kit version information.
2. Changes
These release notes describe the changes, fixes, known issues, and release details that apply to FCOde version 3.09
Hardware Support
* Supports QMI8142 and p-QLE8142 CNA (requires FCode for PPC) * Supports QLE81xx_FCode (requires FCode for SPARC)
Software Components
N/A
Industry Standards Compliance
N/A
3. Bug Fixes
Version 3.09 * Fix Node-Name-Option bit preservation in restore-default-settings.
Version 3.08 * Fix default WWNN & WWPN preservation in restore-default-settings. * Add standard properties. Use m4 utility to automaticly create date string. * Add file rev_level.m4 which has the revision level strings only. * Remove "SFP state: Unknown" message (.isp) if the adapter is IBM mezz card. * Change messages "Login failed" to "Login Abort". "Error Subcode" to "Subcode". * Remove patch of PCI header image size byte at offset 0x2c from init version.
Version 3.07 * Fix read-cap16-cmd. Used when the LUN size is >2TB (i.e. #blocks > 32-bits). * Fix disk-test to work with large (>2TB) LUNs, where the LBA > 32-bits. * Remove command retry when 8048 AEN is received.
Version 3.06 * Add option for qlgc-debug? in nvramrc. If the diag-switch? is true, then the debug? flag is set is set to the value of qlgc-debug?. * Add lba64 large disk capability (read-blocks64 write-blocks64) for SUN only. * Add mbox1 & mbox2 display for 8048 interrupt if debug-asyc? flag (01) is on. * Fix bug in IBM fcp-luns method for the Controller LUN-0 check, lun0-check. * Check Inquiry Qualifier field of Controller LUN-0 in IBM fcp-luns method. * Add more IOCB debugging, Add Erase Response-Queue in mapmem. Had stale data. * Add more debugging for IOCBs, dma-map-in/out, & wait-for-interrupts.
Version 3.05 * Fix set-fc-address issue found with IBM ioinfo. PortID was not getting set. * Re-structure devicepresent.fth. Add set-phandle to set obp-target & obp-portid * Fix multiple close issue found with IBM ioinfo utility.
Version 3.04 * Add alloc-sec-buf & free-sec-buf words with debugging messages. * Add "ibm,write-supported" property to disk child node, as per IBM's request. * Removed VPD validation from validate-nvram due to bug in update utilities. * Fix enab-nvr-acc to alloc sec-buf & add disab-nvr-acc for BOFM word.
3.03 * Added console messages when validate-nvram finds corruption & copies a sector. * Change validate-nvram to check both FC ports on Dual-port CNAs at probe time. * Fix init-flt-offsets to mask FLT attributes. Now it finds FW & Feature-key. * Added restart-mpi after the beacon test finishes to reset LED functionality. * Add NVRAM backup Sector. Add validate-nvram at probe time to fix corruption.
3.02 Initial release.
4. Known Issues
None
5. Additional Information
6. Trademarks
QLogic, the QLogic logo, QLA, QLE, QMI, SANbox, SANsurfer, and SANblade are registered trademarks of QLogic Corporation.
SANtrack and SAN Express are trademarks of QLogic Corporation.
All other brand and product names are trademarks or registered trademarks of their respective owners.
7. Notices
Information furnished in this document is believed to be accurate and reliable. However, QLogic Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are only for illustrative purposes. QLogic Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.
8. Contacting Support
Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration for assistance. QLogic Technical Support can be reached by the following methods:
Web: http://support.qlogic.com North America Contact Information
Email: support@qlogic.com Phone: (952) 932-4040
Support contact information for other regions of the world is available at the QLogic website: http://support.qlogic.com
(c) Copyright 2010. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo are registered trademarks of QLogic Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners. qlgc_fw_cna_qle8142-1_01_94a_windows_32-64_chg
Firmware Version 4.1.442.0 (change log applicable to only previously supported products)
Emulex (R) Corporation Software Kit Ph 4.0.1
CHANGE HISTORY ==============
Firmware Version 4.1.442.0
Problems Fixed: - MAC and PHY loopback fails on HS23 LOM - DCBX does not converge on Cisco 5000 - Several UEFI iSCSI boot issues
Interoperability Since Previous Release: - FCoE and iSCSI support on Emulex Virtual Fabric Adapter (CFFh, 2+2) for IBM BladeCenter - Emulex Virtual Fabric Adapter Advanced (CFFh, 2+2) for IBM BladeCenter
Problems Fixed: - Initialization failures during AC Cycle - Received CQE_EXT_INVALID_RPI in abort completion of ELS command(130042) - Modified SERDES values for IBM system - Flow control to be set for 10G BaseT phys for autonegotiation - Fix HANG_CONDITION logic to not overwrite the ARM FW stage - LUN size reported is not correct - Observed ASSERT trap on Sentosa during disk enumeration - Initiator name set to default when wrongly configuring the initiator name
Interoperability Since Previous Release: - Support for IBM System x x3750 M4 LAN on Motherboard - Support for IBM Dual port 10Gb-T Ethernet Adapter Card - Support for IBM Dual port 10Gb SFP+ Ethernet Adapter Card
Limitations: None
Dependencies: The corresponding NIC device driver and Corekit (management) will need to be installed for this package to function properly.
Problems Fixed: - SR IOV: Unable to ping IPV6 from DUT VF to Peer VF - Reading VPD from BE3 timesout making SR IOV fail in newer kernels - 1Gb devices are being suppressed by kernel during the PCI probe in SLES11 SP2 - MAC Loopback fails when Mgmt Adapter Creation fails - Failure of MAC loopback test after firmware update and warm reboot - Suppress efat dump mailbox commands in the efat dump log - Running ethtool with BE3 takes longer than expected after cable pull - Out of Order CQEs - TRACE_LOG function not printing the messages for some of the VF's - esx4/5 issue. svc target cannot be configured properly - RSCN is not generated by switch when a driver restarts - Port Link stays up even after switch removed
Interoperability Since Previous Release: - Support for IBM Flex System EN4054 4-port 10Gb Ethernet Adapter - Support for IBM Flex System CN4054 10Gb Virtual Fabric Adapter - Support for IBM Flex System x240 10Gb Virtual Fabric LOM - Support for IBM Flex System Manager 10Gb Virtual Fabric LOM
Limitations: None
Dependencies: The corresponding NIC device driver and Corekit (management) will need to be installed for this package to function properly.
Problems Fixed: - NCSI transmit workaround for IBM - Issues with data reporting when BOFM enabled - Improved network performance throughput - Issues with IBM Management network performance - Logical link status for IBM mezz card shown as 'N/A' - Serial Over LAN fails when more than one blade installed with a single switch - Removed UEFI menu items for unsupported functions on a port - Issues with diagnositics in virtual NIC/UMC mode - Issues with MAC and PHY loopback on OneConnect devices - Several issues with FCoE on some OEM fabric switches
Interoperability Since Previous Release: - Support for HS 23 Virtual Fabric LAN on Motherboard - Support for VFA III (95Y3762, 95Y3768), 90Y6456 - Support for Red Hat Enterprise Linux 5.8, 6.2 - Support for SuSE Linux Enterprise Server 11 SP2 - Support for VMware ESX/ESXi 4.0 Update 3 - Support for VMware ESX/ESXi 4.1 Update 2 - Support for IBM's Features on Demand (FOD) - Formal support for SR-IOV
Limitations: None
Dependencies: The corresponding NIC device driver and Corekit (management) will need to be installed for this package to function properly.
Problems Fixed: - iLab Tucson - lpfc Device Resets and path failures continue after error inject. - Writes do not complete when running LIP test on BE3 port 2 - IPV6 implementations no longer experience an unrecognized routing type error. - VLAN tagging is now disabled on the OneConnect UCNA when multichannel is disabled. - UEFI/BIOS-assigned LPVIDs now function properly on the OneConnect 10102-based UCNA. - OneConnect UCNAs no longer send and receive only double-tagged packets and discard all other packets. - PHY, MAC, and External loopback tests no longer fail on all platforms. - Firmware now returns the proper OneConnect UCNA model number. - IPV6 implementations no longer experience an unrecognized routing type error. - Installing Windows 2008 or Windows 2008 R2 on remote iSCSI disks no longer causes the system to hang. - Issues no longer occur when resetting a server configured for multipathing on VMware ESX systems. - VLAN tagging is now disabled on the OneConnect UCNA when multichannel is disabled. - UEFI/BIOS-assigned LPVIDs now function properly on the OneConnect 10102-based UCNA. - OneConnect UCNAs no longer send and receive only double-tagged packets and discard all other packets. - An adapter hardware error no longer occurs when running I/O with LUNs on x86 platforms. - Changing from Convergence Enhanced Ethernet (CEE) to Chassis Internal Network (CIN) and then rebooting no longer fails to link-flap (CIN Fabric Login (FLOGI) now occurs). - PHY, MAC, and External loopback tests no longer fail on all platforms. - Firmware now returns the proper OneConnect UCNA model number. - DCB settings can now be configured. - (iSCSISelect) When enabling DHCP for an iSCSI initiator, the Emulex iSCSI Network Configuration utility now waits approximately 20 seconds to make a DHCP connection before returning control. - (FCoE BootBIOS) FCF CEE parameters for Boot from SAN configuration are now saved properly.
Enhancements: - Added support for switch-independent multichannel mode. - Added support for IBM Virtual Fabric 10Gb RackSwitch firmware 6.8.1.0. - Added support for IBM Virtual Fabric 10G Switch Module firmware 6.8.1.0. - Added support for Fibre Channel over Ethernet (FCoE) on rack systems. - Added support for iSCSI hardware offload on rack systems. - Added support for Cisco Nexus 5000-series switches.
Limitations: None
Dependencies: The corresponding NIC device driver and Corekit (management) will need to be installed for this package to function properly.
Problems Fixed: - Emulex: lost network connectivity along with fatal adapter error logged in W2K8 R2 system event log with Emulex BE3 card - Emulex: Support for IBM pre-standard FCoE FIP configuration extension - (BE3) unable to obtain link with QLogic Passthru Module
Enhancements: - Add NIC CoS design and implementation - Add capability to return SEEPROM MAC address's (for all 8 functions) in MAC_QUERY IOCTL - Add support for 1Gb SFP Modules - Add tempsensor display - Add copper cable support (7m, 10m lengths) - Add Support for 10G BaseT PHY - Added support user-specified speed and disable auto-negotiation - Added common mode parameter elx_fw_cna_4_0_1-4_1_442_0_win2k8_32-64_chg
Dynamic System Analysis (DSA) Preboot Change History
Version 9.21, Build ID DSYTA1U o New System Support: o New Operating System support: o New server options support: o Problem(s) Fixed: 1.Recovered LSI Rawdata: "MegaCli -FwTermLog -Dsply -aALL" o Enhancement: o Limitations: Refer to readme o Functional change: o Dependencies: o Special usage: - 2012 ToolsCenter 12B Plus
Version 9.20, Build ID DSYTA0R o New System Support: x3530 M4 (7160) x3630 M4 (7158) x3750 M4 (8722, 8733) HS23E (8038, 8039) Flex System x220 Compute Node (7906, 2585) o New Operating System support: vSphere Hypervisor 5.0u1 with IBM customization o New server options support: o Problem(s) Fixed: 1. PMR 05819,YL2,760 An error occured during the execution of DSA on Windows, DSA exits with an error at the eventlog plugin.
2. PMR 15086,OTH,760 DSA 9.00 with --no-imm-lan option does not work correctly on RHEL5.3. The USB port state is changed during the execution of DSA.
o Enhancement: o Limitations: Refer to readme o Functional change: 1. Add HW remote presence key collection for High volume systems. o Dependencies: o Special usage: - 2012 ToolsCenter 12B
Version 9.07, Build ID DSYT9CA o New System Support: x3750 M4 (8722, 8733) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Version 9.06, Build ID DSYT9BC o New System Support: Flex System x220 Compute Node (7906) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Version 9.05, Build ID DSYT9AA o New System Support: x3630 M4 (7158) x3530 M4 (7160) x3100 M4 Refresh1 (2582) x3250 M4 Refresh1 (2583) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Version 9.04, Build ID DSYT99E o New System Support: Flex System x240 Compute Node (8737, 8738, 7863) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies:
Version 9.03, Build ID DSYT98I o New System Support: HS23E (8038, 8039) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies:
Version 9.02, Build ID DSYT97C o New System Support: iDataPlex dx360 M4 server/2U chassis (7912/7913) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Functional change:
Version 9.01, Build ID DSYT96D o New System Support: x3500 M4 (7383) x3550 M4 (7914) x3650 M4 (7915) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage: o Special usage:
Version 9.00, Build ID DSYT95W o New System Support: BladeCenter HS23 (7875) BladeCenter HX5 (7873, 1910) Flex System x240 Compute Node (8737, 8738, 7863) Flex System Manager Node (8735) x3500 M4 (7383) x3550 M4 (7914) x3630 M4 (7158) x3650 M4 (7915) x3690 X5 (7192, 7147) x3850 X5 / x3950 X5 (7143, 7191) o New server options support: o Problem(s) Fixed: 1. PMR 24817,8QG,000, PMR 30680,499,000 After kicking off DSA on one of the management nodes (x3650 M2) of SONAS 1.2(RHEL5 based), the node became unresponsive and dropped out of the cluster.
2. PMR 53575,000,834, PMR 05961,YL4,760 After running DSA, when using linux dump command on a DDS5 usb internal tape drive attached in x3650M2 backup speed becomes very slowly or failed.
3. PMR 26905,095,866 Running DSA 4.0 as well as DSA 3.4 on x3850 X5 the server is freezing, users have to reboot the server.
4. DSA 4.00 and previous version segmentation fault issue
o Enhancement: o Limitations: o Dependencies: o Functional change: 1. Add GUI and CLI menu for Features on Demand (FoD) Activation Key Management o Special usage:
Version 4.02, Build ID DSYT92I o New System Support: iDataPlex Direct Water Cooled dx360 M4 server o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Version 4.01, Build ID DSYT92H o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage: - 2011 4Q lifecycle
Version 4.00, Build ID DSYT91S o New System Support: o New server options support: o Problem(s) Fixed: 1. PMR 15065,OTR,760 On Unisys ES7000 or x3850 X5, the Memory Card number with failed DIMM can not be reported in IPMI Eventlog if the Memory Card is bigger than 4.
o Enhancement: o Limitations: o Dependencies: o Functional change: 1. Added > 1TB memory test support o Special usage: - 2011 ToolsCenter 11D
Version 3.48, Build ID DSYT89PUS o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage: - 2011 3Q lifecycle
Version 3.47, Build ID DSYT89LUS o New System Support: x3100 M4 (2582) x3250 M4 (2583) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Version 3.46, Build ID DSYT89GUS o New System Support: System x iDataPlex dx360 M3 (6391) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Version 3.45, Build ID DSYT89EUS o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage: - x3850 X5 / x3950 X5 (7143, 7191) EXA scaling
Version 3.43, Build ID DSYT87HUS o New System Support: BladeCenter HX5 (7873,1910) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Version 3.43, Build ID DSYT87FUS o New System Support: x3850 X5 / x3950 X5 (7143, 7191) x3690 X5 (7192, 7147) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Version 3.40, Build ID DSYT85T o New System Support: BladeCenter HS22 (1911) x3650 M3 (5454) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Version 3.30, Build ID DSYT80S o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: 1. Correct a problem with LSI MegaRAID reporting for IBM Service o Special usage:
Version 3.20, Build ID DSYT75X o New System Support: x3630 M3 (7377) x3690 X5 (7148, 7149) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: - If you have ServeRAID (M1015) SAS/SATA Controller, 46M0831 installed, you will need one of the following: - uEFI GYE133A or greater for x3200 M3 and x3250 M3 - uEFI Y4E145B or greater for x3400 M2, x3400 M3, x3500 M2 and x3500 M3 - uEFI D6E145C or greater for x3550 M2, x3550 M3, x3650 M2 and x3650 M3 o Functional change: 1. Add LSI Hard Disk Drive (HDD) diagnostic back for both the onboard SAS chip and ServeRAID o Special usage:
Verion 3.20, Build ID DSYT75U o New System Support: x3755 M3 (7164) o New server options support: o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: o Special usage:
Verion 3.10, Build ID DSYT70X o New System Support: x3400 M3(7378, 7379) x3500 M3(7380) x3550 M3 (7944, 4254) x3620 M3 (7376) x3650 M3 (7945, 4255) x3690 X5 (7148, 7149) x3850 X5 Standard Single-node and Multi-node models(7145, 7146) x3950 X5 Specially configured Database Engine models (7145, 7146) iDataplex dx360 M3 (6391) HS22V (7871,1949) HX5 (7872, 1909) o New server options support: Emulex 10Gb/s Fibre Channel over Ethernet Dual Channel Converged Network Adapter(LP21002) Emulex PCI-e Gen2.0 Dual Port 10Gb NIC (49Y4250) 6Gb SSD HBA (46M0912) 6Gb SAS HBA (46M0907) Intel QuadPort Ethernet Server Adapter CFFh Intel Ethernet Daughter Card FCoE SRIOV Key (Ethernet) iSCSI Key (Ethernet) Secure Encryption HBA for 8Gb FC eHBA Emulex Brocade 4Gb FC HBA(59Y1992, 59Y1998) Emulex 2-Port 10Gb Multi-function IO Adapter (CFFh) (49Y4235) Brocade 10Gb Dual-port CNA (42C1820) Broadcom NetXtreme II 1000 Express Quad port Ethernet Adapter (49Y4220) Broadcom NetXtreme II 1000 Express Dual Port Ethernet Adapter (42C1780) MAX5 Memory Expansion Unit o Problem(s) Fixed: o Enhancement: o Limitations: o Dependencies: o Functional change: 1. Add a new option --disable-imm-lan to take down IMM USB Over Lan interface when DSA complete. 2. Added ServeRAID data collection o Limitations: - The following function has been temporarily removed from DSA Preboot for both the onboard SAS chip and ServeRAID: - LSI Hard Disk Drive (HDD) diagnostic o Dependencies: - If you have ServeRAID (M1015) SAS/SATA Controller, 46M0831 installed, you will need one of the following: - uEFI GYE133A or greater for x3200 M3 and x3250 M3 - uEFI Y4E145B or greater for x3400 M2, x3400 M3, x3500 M2 and x3500 M3 - uEFI D6E145C or greater for x3550 M2, x3550 M3, x3650 M2 and x3650 M3 o Special usage:
Version 3.02.56, Build ID DSYT56e o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: - The following systems are supported when BoMC downloads the corresponding system enablement pack: HS22V (7871,1949) x3550 M3 (7944,4254) x3650 M3 (7945,4255) x3400 M3 (7378,7379) x3500 M3 (7839) dx360 M3 (6391) o Limitations: - No HDD diagnostics available - To ensure quality and stability of the DSA code, we have reverted some display functionality of RAID information to what was shown in previous versions of DSA. This affects RAID display on the following adapters: Megaraid 8480 Serveraid MR10i Serveraid MR10is Serveraid MR10m Serveraid MR10k Serveraid M1015 Serveraid M5014 Serveraid M5015 On these adapters, the RAID information is generated from the output of separate command line tools and the format may not match other output in DSA. Dependencies: o Dependencies: o Functional change: o Special usage:
Version 3.00, Build ID: DSYT55a o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: - Added support for Machine Types 7327, 7328, 4251, 4252, 4261 o Limitations: - No HDD diagnostics available o Dependencies: o Functional change: o Special usage:
Version 1.16, Y4YT19AUS o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: - Added support for Machine Types 7839, 7836, 7837 o Limitations: o Dependencies: o Functional change: o Special usage:
Version 1.15, TMYT20AUS o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: - Added support for Machine Types 7321, 6380, 7323 o Limitations: o Dependencies: o Functional change: o Special usage:
Version 1.14, D6YT37AUS o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: - Added support for Machine Types 7946, 4198, 7947, 4199 o Limitations: o Dependencies: o Functional change: o Special usage:
Version 1.13, P9YT48AUS o New System Support: o New server options support: o Problem(s) Fixed: o Enhancement: - Added support for Machine Types 7870, 1936, 7809 o Limitations: o Dependencies: o Functional change: o Special usage:
Version 1.00 - Initial release
(C) Copyright International Business Machines Corporation 2008 - 2012. All rights reserved. ibm_fw_dsa_dsyta4b-9_24_anyos_anycpu_chg
Windows FCoE Driver version 2.70.018
Problems Fixed:
- Fixed sending ABTS continuously to Flogi issue - Fixed reset and link bounce issues for SLI4 FC public loop - Support for ABTS timeout handling for both SLI3 and SLI4 - Fixed loopback test incorrectly dropping the loopback frame in SLI4 - Fixed exchange management issue in SLI4 CT receive path causing array overflow - Fixed firmware version issue following download in link up state - Fixed problem in init_vfi completion handler that stalled fabric login on BE FCoE FW - Fixed problem that caused OCM ELS Echo Test to fail - Fixed the loopback test issue in recovering from error condition - Support persistent link down for SLI4 FC - Fix DFC_IssueDumpMBox to manage request type 3 which includes link select option. - Modified reinitialization sequence following reset to fix discovery failure post type 1 or type 3 reset - Fixed new firmware dump issue
Windows FCoE Driver Version 2.50.007 elx_dd_fc_4_0-2_70_018_win2k8_32-64_chg
Fibre Channel Adapter STOR Miniport Driver for Windows 2003/2008 Release Notes for version 9.1.9.25
February 22, 2011
QLogic Corporation All rights reserved
Table of Contents
1. Version 2. Changes 3. Bug Fixes 4. Known Issues 5. Additional Information 6. History 7. Firmware (Embedded in Driver) 8. Trademarks 9. Notices 10. Contacting Support
1. Version
These release notes describe the changes, fixes, known issues, and release details that apply to the QLogic Fibre Channel Adapter STOR miniport driver, version 9.1.9.25.
This driver package includes:
. Firmware version 5.04.02 (4Gb Fibre Channel adapters) . Firmware version 5.04.02 (8Gb Fibre Channel adapters) . API version 1.28.0.80 (QLogic Multipath Device-Specific Module [QLSDM])
2. Changes
The following changes have been made to the Fibre Channel Adapter STOR miniport driver between versions 9.1.8.25 and 9.1.9.25.
Hardware Support
No changes
OS Support
. Support is for Windows 2003/2008 versions of Windows Server.
Software Components
. Updated firmware version: 5.04.02 (4Gb and 8Gb). . Added Windows property page.
Industry Standards Compliance
N/A
3. Bug Fixes
The bug fixes made to the Fibre Channel Adapter STOR miniport driver between versions 9.1.8.25 and 9.1.9.25 are detailed in section 6 History and section 7 Firmware (Embedded in Driver).
4. Known Issues
The Fibre Channel Host Bus Adapter STOR miniport driver version 9.1.9.25 has the following known issues:
None
5. Additional Information
None
6. History
This section lists the changes that have been made to the QLogic Fibre Channel Adapter STOR miniport driver.
6.1 9.1.9.25 QL—12/17/10
. No fixes in this driver release.
6.2 9.1.8.25 QL—12/11/09
. Closed WMI mapping interoperability with HBAAPI.DLL issue.
6.3 9.1.8.19 QL—10/12/09
. Driver restores 4G Fibre Channel PCIe Device Control and Link Control registers based on saved value. . Closed ER0000000067688: In multi-processor systems, the clustering driver timer popped as a result of unrecovered I/O through a LUN reset.
6.4 9.1.8.17 QL—05/21/09
. Firmware versions: 5.01.02 (4Gb and 8Gb). . API version 1.28.0.73 (QLSDM). . Driver restores 4G Fibre Channel PCIe Device Control and Link Control registers based on saved value.
6.5 9.1.7.18 QL—05/22/08
. Firmware versions: 3.03.25 (2Gb), 4.04.00 (4Gb and 8Gb). . API version 1.28.0.63 (QLSDM).
. Removed support for the following devices (supported platforms): . PCI\VEN_1077&DEV_2432&SUBSYS_011C1077 (x86, x64)
NOTE: Microsoft requires x86 and x64 support for all Fibre Channel Adapters.
. Firmware versions: 3.03.25 (2Gb), 4.03.02 (4Gb). . API version 1.28.0.63 (QLSDM). . Added support for 64-bit QLSDM DLLs. . Enabled FDMI by default. . Added support for Atmel flash AT26DF081A. . Removed support for obsolete qd parameter. . Changed the driver to not log events caused by I/O completion errors.
6.7 9.1.7.16 QL—02/19/08
. Added support for the Windows Server 2008 operating system. . Applied a fix to handle logout in the loop environment.
NOTE: Microsoft requires x86 and x64 support for all Fibre Channel Adapters.
. Firmware versions: 3.03.25 (2Gb), 4.02.00 (4Gb). . API version: 1.28.0.50 (QLSDM). . Unique assignment of management server N_Port handle values to be for each virtual port. . NPIV (N_Port ID virtualization). . Target link speed (iiDMA). . PcieLinkCap/Stat to HbaDeviceChipProperty. . Flash layout regions for 4Gb and returned flash layout table from flash if it is valid. . Three Alternate Boot Devices and OOFR (out-of-order frame receive). . Removed QL2XHAI2: IHVs are required to use Host Bus Adapter API provided by Microsoft. . Preserved BIOS defaults when updating multi-boot image whose BIOS locations can be anywhere in the image. . Fixed checksum calculation in QLSDM when two-bios image is flashed. . Fixed ER50975: Initiator discovery problem caused a large burst of RSCN activity when the NetApp does its failover. A failed GPNID command occurring during ports discovery must not cause the termination of the discovery process. . Handled the case where the GNNFT command was failing due to incorrectly calculated the maximum data response length. . Setting the alternate WWN and enabling it in the NVRAM did not propagate through to the Host Bus Adapter. Reading the NVRAM and reinitializing the Host Bus Adapter will handle this case.
6.9 9.1.4.16 QL 3.03.21 4.00.26—02/02/07
. Adhered to Subsystem Id document v2.2m+. . Firmware versions: 3.03.21 (2Gb), 4.00.26 (4Gb). . API versions: 1.28.0.37 (QLSDM), 2.0.0.14 (QL2XHAI2). . Fixed ER50975: Initiator discovery problem caused a large burst of RSCN activity when the NetApp does its failover. A failed GPNID command occurring during ports discovery must not cause the termination of the discovery process.
6.10 9.1.4.15 QL 3.03.21 4.00.26—11/17/06
. Firmware versions: 3.03.21 (2Gb), 4.00.26 (4Gb). . API versions: 1.28.0.37 (QLSDM), 2.0.0.14 (QL2XHAI2). . Adhered to Subsystem Id document v2.2m+.
NOTE: Microsoft requires both x86 and x64 support all Host Bus Adapters.
. Removed support for the following devices: . PCI\VEN_1077&DEV_6312&SUBSYS_01301077 (x86, x64) . PCI\VEN_1077&DEV_2422&SUBSYS_01471077 (IA64) . PCI\VEN_1077&DEV_2432&SUBSYS_01451077 (IA64)
. Conformed QLSDM and the driver to the revised for "Get/Set Target Link Speed". . Increased loopback test buffer size to 2048 bytes in QLSDM.
. Closed ER49768: Loopback test always failed when the NVRAM frame size is set to 512 or 1024 (Windows). Pass in transfer size instead of hard-coded alue in QLSDM. . Handled the case where the device becomes not ready in the StartIO routine. . Closed ER48374: SANsurfer 5.0.0 Build 4 – Driver 9.1.3.10b2—Windows IA64 SP1—HP. The Host Bus Adapter model numbers do not show up on Information page. . Closed ER48117 (AR 48907, SR70415 [REF:609618455): Long Erase (0x019) issues with DLT S4 and QLE2462. Error occurs (most likely a bus reset) when running a long erase that takes longer than 110 minutes on the Quantum DLT-S4 (firmware:0808) drive, which exceeds the built in 4Gb firmware timeout limit.
6.11 9.1.3.16 QL 3.03.21 4.00.23—10/05/06
. This version replaced the invalid release 9.1.3.15. . Firmware versions: 3.03.21 (2Gb), 4.00.23 (4Gb). . API versions: 1.28.0.35 (QLSDM), 2.0.0.14 (QL2XHAI2). . Removed I/O Reduction support for the 4G Host Bus Adapter.
6.12 9.1.3.15 QL 3.03.21 4.00.23—09/19/06
. Firmware versions: 3.03.21 (2Gb), 4.00.23 (4Gb). . API versions: 1.28.0.35 (QLSDM), 2.0.0.14 (QL2XHAI2). . Added OEM specific support for assigning a virtual world wide port name via registry key. . Added "Get/Set" target link speed support. . Changed the INF to enable the I/O Reduction for the 4Gb Host Bus Adapter for the IA64 platform based on Microsoft document. . Added multiple BIOS support in QLSDM. . Initialized debug file name variable during DLL load (QL2XHAI2). . Closed EMC OPT23605: x64 Server hangs during boot at the “Applying Computer Settings.” . Cleaned up code related to get Object text for OS Device Name (QL2XHAI2). . Closed ER47338: Attached target devices not visible to OS after server reboot (QLE220). . Closed ER47436: Driver not Login into Target Devices (QLE220). . Closed ER47530: Topology diagram is not displaying properly when LIP issued on QLA2462 port.
6.13 9.1.2.19 QL 3.03.19 4.00.23—06/30/06
. Firmware versions: 3.03.19 (2Gb), 4.00.23 (4Gb). . Closed ER46891: Bus Resets Under Heavy I/O Load. . API Versions: 1.28.0.33 (QLSDM), 2.0.0.12 (QL2XHAI2). . Closed ER47166: SANsurfer FC HBA Manager B83 showed only one port see the storage even though no zoning. . Closed OPT 235681: port failure after disconnecting and reconnecting ISL port used by MirrorView. . Closed ER47235: SANsurfer FC HBA Manager does not display the topology view correctly when the Host Bus Adapters are set to loop only until the system is rebooted.
6.14 9.1.2.18 QL 3.03.19 4.00.22—06/16/06
. Firmware versions: 3.03.19 (2Gb), 4.00.22 (4Gb). . API Versions: 1.28.0.33 (QLSDM), 2.0.0.12 (QL2XHAI2). . Added VPD update support for 2432 4-port adapter in 1.28.0.33 (QLSDM). . Recognized Asynchronous Event 8048h as a valid AEN.
. Modified timer task to handle the case when Host Bus Adapter is in a stopped state. . 24xx only: Added support for NVRAM Nodename option bit. . 4Gb only: Added support for reading data from SFP (small form-factor pluggable) optical transceivers via QLSDM. . Adhered to Subsystem Id document v2.2g. . Added support for the following devices (supported platforms): . PCI\VEN_1077&DEV_2422&SUBSYS_014D1077 (x86, IA64, x64) . PCI\VEN_1077&DEV_2432&SUBSYS_014C1077 (x86, IA64, x64) . PCI\VEN_1077&DEV_2432&SUBSYS_01521077 (x86, IA64, x64) . PCI\VEN_1077&DEV_2432&SUBSYS_01531077 (x86, IA64, x64) . PCI\VEN_1077&DEV_2432&SUBSYS_01541077 (x86, IA64, x64) . PCI\VEN_1077&DEV_5432&SUBSYS_014E1077 (x86, x64)
. Adhered to firmware dump procedure per 2400 Series Firmware Interface Specification version C. . Closed ER47113: RX2600 fails to boot Windows after 1MB bin flash—SANsurfer 2.0.30b84_windows. . Fixed: LUNs disappeared after DS4000 controller firmware download in direct attach. . Closed ER46586: "Bind By Port ID + Present Targets that are persistently bound only" is not working (in loop environment). . Changed to perform the full firmware dump when firmware error occurs. . Closed ER46141: JBOD disks turn offline in SANsurfer FC HBA Manager and SANsurfer FC HBA CLI when settings are Present targets that are persistently bound + Bind by Port ID (in loop environment). . Corrected firmware region size in option ROM layout, that is, firmware size in flash. . Closed ER45035: GPN_ID has wrong payload length after unplug and re-plug. . When using the QLSDM to retrieve the transceiver data, you may get SDMGT_CANNOT_GET_SFP_DATA error on system platforms using specific models of Supermicro motherboard such as P3TDL3 and P3TDLE. The QLSDM retrieves the transceiver data using underlying 4Gb firmware (v4.00.21) that reports an error code of 4005 for this operation. . Verified support for Atmel flash chip AT26DF081A.
6.15 9.1.2.16 QL 3.03.19 4.00.18—03/16/06
. Firmware versions: 3.03.19 (2Gb), 4.00.18 (4Gb). . Adhered to Subsystem Id document v2.2f. . Added support for the following devices (supported platforms): . PCI\VEN_1077&DEV_6312&SUBSYS_01191077 (x86, x64) . PCI\VEN_1077&DEV_6312&SUBSYS_011C1077 (x86, x64) . PCI\VEN_1077&DEV_6312&SUBSYS_01301077 (x86, x64) . PCI\VEN_1077&DEV_6322&SUBSYS_012F1077 (x86, x64)
. Set additional firmware option bit 10 for 2Gb Host Bus Adapter so the firmware waits for the task management command, (such as reset LUN to complete.) . Closed OPT226506: Host Bus Adapter does not re-login to target after target sends LOGO to Host Bus Adapter. . Closed ER44735: The link status behaves differently between QLE2460 and QLA2342. . Closed ER45228: Incorrect HwVersion string is reported by QLogic IHV HBA_GetAdapterAttributes call. . Closed ER45230: Event Id 11 entries logged by ql2300 at offset x10 and offset x34 do not match the Error Codes published on the Web. Because the miniport uses Microsoft's Storport.sys driver to actually log the error event, and it has been confirmed that the storport.sys driver logs the event incorrectly. A bug has been reported to Microsoft on this: SRX041110604850 (STORport—Incorrect event data is logged when storport's storportlogerror). Meanwhile, the Miniport driver is changed to log the event code at offset x10 by default. This workaround is controlled by the registry parameter mevtwrkaround. For details on this parameter, please see the readme file. . Closed ER45232: Use memory map mechanism in the driver.
6.16 9.1.2.15 QL 3.03.19 4.00.17—02/13/06
. Firmware versions: 3.03.19 (2Gb), 4.00.17 (4Gb). . Adhered to Subsystem Id document v2.2e. . Added support for the following devices (supported platforms): . PCI\VEN_1077&DEV_5432&SUBSYS_013E1077 (x86, IA64, x64) . PCI\VEN_1077&DEV_5432&SUBSYS_013F1077 (x86, IA64, x64) . PCI\VEN_1077&DEV_2422&SUBSYS_014A1077 (x86, IA64, x64) . PCI\VEN_1077&DEV_2432&SUBSYS_014B1077 (x86, IA64, x64)
. Added support to use combined 2Gb IPX firmware. . Added support for SST25VF080B flash part. . Added option for not to dump code section for 24xx firmware dump. . Closed ER44270: Serial number for the 4Gb Host Bus Adapter should be obtained from the VPD. . Closed ER38787: Windows 2000/qla2340/Veritas tape backup long cable pull failed error message ERROR_DEVICE_NOT_CONNECTED.
6.17 9.1.1.15 QL 3.03.18 4.00.12—10/12/05
. Firmware versions: 3.03.18 (2Gb), 4.00.12 (4Gb). . Closed PTR 90818: QLogic 4Gb driver returns selection timeout immediately after cable pull in an OEM special dual loop configuration. . Closed PTR 90652: QLogic Driver returns a selection timeout when rebooting a controller in an OEM special dual loop configuration.
6.18 9.1.0.18 QL 3.03.18 4.00.12—10/11/05
. Firmware versions: 3.03.18 (2Gb), 4.00.12 (4Gb). . Adhered to Subsystem Id document v2.2d. . Added support for the following devices (supported platforms): . PCI\VEN_1077&DEV_2422&SUBSYS_12D7103C (x86, IA64, x64) . PCI\VEN_1077&DEV_2312&SUBSYS_01491077 (x86, IA64, x64)
. Firmware versions: 3.03.16 (2Gb), 4.00.12 (4Gb). . Embedded 24xx firmware in the driver. . Closed ER43175: New driver could not detect any device to install as BOOT from SAN on one specific setup.
6.21 9.1.0.15 QL 3.03.16—08/10/05
. Firmware versions: 3.03.16 (2Gb), (Use onboard 4Gb firmware.) . Added 24xx support. . Closed ER42601: Need to change bit used to control LED mode.
6.22 9.0.2.17 QL 3.03.13—04/07/05
. Firmware versions: 3.03.16 (2Gb).
7 Firmware (Embedded in Driver)
The following lists show the changes and bug fixes to the firmware that is embedded in the drivers for the 4Gb Fibre Channel Adapters and 8Gb Fibre Channel Adapters from versions 4.03.00 to 5.04.02.
7.1 From 5.04.01 to 5.04.02
Changes
Error Report
Description
ER76448
Current ISP firmware supports maximum frame sizes of 512, 1024, and 2048 in the received PLOGI or PLOGI-ACC. This change provides an option to disable this restriction by setting bit 6 of Firmware Options 2 through Set Additional Firmware Options Mailbox Command (038h). Note that this option bypasses the Maximum Transmit Data Frame Size set by the Set Transmit Parameters Mailbox Command (019h).
Bug Fixes
Error Report
Description
N/A
None
7.2 From 5.04.00 to 5.04.01
Changes
Error Report
Description
ER74448
Option to Disable Automatic FDISC
Currently, the firmware automatically performs FDISC for enabled virtual ports (VPs) upon receiving an FLOGI_ACC. This procedure does not mesh well with driver architectures, which typically control the FDISCs. A new option bit allows you to suppress the automatic FDISCs. This option bit is available in both the ISP25xx and ISP81xx firmware. Older firmware ignores this option bit.
Functional Description
The Disable FDISC bit (multi-ID initialize firmware control block, Global VP Options field, bit 4) disables the automatic FDISCs.
If this bit is set, any VPs enabled in the multi-ID initialize firmware control block remain enabled, but the ID is not in the acquired state. The driver must issue a Modify Virtual Port Configuration IOCB (with the Command field set to 3h) to instruct the firmware to transmit the FDISC after it receives the report ID acquisition (RIDA) for VP0.
When Disable FDISC is set, no FDISC is transmitted for the enabled VPs on any event, which results in a FLOGI. The driver should issue a Modify Virtual Port Configuration IOCB (with the Command field set to 3h) to instruct the firmware to transmit the FDISC for a specific VP (after receiving the RIDA for VP0). The driver must instruct the firmware to transmit an FDISC for all enabled VPs. After all the FDISC is completed, the firmware state changes to ready. In addition, a Port Database Changed AEN (8014h), with the Outgoing Mailbox 1 register set to FFFFh and Outgoing Mailbox 2 register set to 6h, is generated and passed to the driver. If the driver does not transmit FDISC for a VP, the driver must disable that specific VP using Virtual Port Control IOCB (Entry Type field 30h). This step is needed because a VP is enabled, but the ID is not in the acquired state, which can prevent the firmware state from changing to ready, and prevent generation of the Port Database AEN as previously stated.
The option applies only to fabric point-to-point topology and NPIV environments.
ER74764
Added option to disable PRLI REC_SUPPORT bit. To disable the PRLI REC_SUPPORT bit (PRLI REC_SUPPORT bit is set by default), set bit 6 of the additional firmware option 3 of the Set Additional Firmware Options (38h) Mailbox Commands). This option has to be set prior to Initialize Firmware mailbox command (60h or 48h).
Bug Fixes
Error Report
Description
ER71838
Customer-specific fix.
ER73958
24xx/25xx MID. Fixes potential drops of PRLI request or firmware incorrectly assigning multiple N_Port Handles for same Port_id.
81xx only. Added Additional Firmware Options 2, bit 9 to improve NIC bandwidth when NIC and FCoE receive traffic are running concurrently.
ER69606
81xx/25xx MIDQ only. Provide capability in Queue Management (1Fh) mailbox command to move a queue base address. For details, refer to the Multiple Queue Support for 2500 Series Fibre Channel and 8100 Series Converged Network Adapter Controllers Applications Note.
ER69613
81xx only. Added support for LR Optics. Requires MPI FW 1.39.00 or later with proper configuration files.
ER70311
Added an Additional Firmware Options 3 bit to discard any frames received out of order unless the Initialize Firmware Options 3 bit 6 (Enable Receive Out-of-Order Data Frame Handling) is set to 1.
Changes to Set Additional Firmware Options (38h) Mailbox Command interface:
Bit 15 Do not transfer received out of order data for an exchange to host memory (except during SRR recovery).
• Replace bit_15 description with:
Bit 15 (Do not transfer received out of order data for an exchange to host memory). When this bit is set to 1, the ISP firmware does not transfer received out-of-order data for an exchange to host memory, except during SRR recovery. A frame is considered "out-of-order" after a previously-received frame is dropped due to an error, as well as a true out-of-order frame receipt condition.
NOTE: Bit 15 is ignored when Initialize Firmware Options 3 bit 6 (Enable Receive Out-of-Order Data Frame Handling) is set to 1.
ER71132
24xx/25xx only. Bit 8 of State Flags field in Status IOCB Type has been changed from Reserved to "Unable to send OPN to Destination." This bit is set when the destination device sends an immediate CLS in response to an OPN from ISP.
ER71742
Add option to disable the firmware automatic port login (PLOGI) to the simple name server (SNS). To enable this feature, set Bit 15 of Additional Firmware Options 2 when issuing Set Additional Firmware Options Mailbox Command 0038h.
Error Report
Description
ER71764
24xx SB2 only. Return the lower 16-bit of current RBC count in Receive IU and Add Buffer IOCBs. This extends the scope of ER68875 to include 24xx.
• For IOCB type 0x4D, the lower 16-bit of the counter is stored at offset 0x3E to 0x3F. • For IOCB type 0x4C, the lower 16-bit is stored at offset 0x1C to 0x1D.
ER71877
81xx only. Added an Additional Firmware Options 2 bit to post all Asynchronous IOCBs to the ATIO queue when target mode is enabled.
Changes to Set Additional Firmware Options (38h) mailbox command interface:
Bit 11 (Enable Asynchronous IOCBs to ATIO queue). When this bit is set to 1, the firmware posts all asynchronous IOCBs (PUREX, ABTS Received, and Report ID Acquisition) to the ATIO queue when target operation is enabled. Additionally, if a login-affecting ELS command (PLOGI, PRLI, PRLO, LOGO, ADISC, PDISC, or TPRLO) is passed up to the target driver, an Immediate Notify IOCB with Status Code 46h, Login affecting ELS command received, shall not be sent.
Initialize Firmware Options 3 bit 26 (Enable Ethernet Header Receive IOCB for ATIO Queue) is used to request the firmware place an Ethernet Header Receive IOCB on the ATIO queue before each PUREX and ABTS Received IOCB. Initialize Firmware Options 3 bit 27 (Enable Ethernet Header Receive IOCB for Response Queue) shall be ignored.
When bit 11 is set to 0, the firmware posts asynchronous IOCBs to queues specified in the ISP81xx firmware specification.
Changes to Initialize Firmware, Firmware Options 3:
• Bit 27 (Enable Ethernet Header Receive IOCB for Response Queue). When Additional Firmware Option 2 bit 11 (Enable Asynchronous IOCBs to ATIO queue) is set, this bit is ignored. • Bit 26 (Enable Ethernet Header Receive IOCB for ATIO Queue). When Additional Firmware Option 2 bit 11 (Enable Asynchronous IOCBs to ATIO queue) is set, and this bit is set, the firmware places an Ethernet Header Receive IOCB on the ATIO queue before each PUREX and ABTS Received IOCB.
ER72460
MID only. Send LOGO if an FDISC is rejected with error/explanation code 03/0D. After LOGO ACC is received, the firmware retries the FDISC.
Bug Fixes
Error Report
Description
ER66337
81xx only. Corrected FCP-2 processing during a link disruption until re- discovery is complete.
ER67952
MIDQ builds. Corrected N_Port-N_Port FLOGI Dest ID of 0.
ER68658
2532-based adapter only. Corrected an issue that could prevent the link from being established when connected to specific targets operating at 8Gb link speed in a loop topology.
Error Report
Description
ER68965
Correct abort handling of a Command Type 6 IO that could result in fatal firmware error or I/O timeout.
ER69182
81xx only. Set a Buffer Credit value of 16 in FLOGI/FDISC for interoperability with FCFs that incorrectly use the field.
ER69245
81xx only. Correct handling of received stale frames forwarded by an FCF after the link is re-established.
ER69291
81xx only. Corrected an issue that would prevent the link from being re- established after a cable pull.
ER69336
Correctly set the "sequence initiative transferred bit" (F_CTL) for transmission of status mode 2 FCP_RSP with confirmation request.
ER69457
81xx only. Added support to detect MPI pause during heartbeat processing.
ER69564
Disk CRC only. Correct firmware reported residual Byte Count for CRC (T10) Read commands.
ER69683
81xx only. Corrected CTIO handling when the link was down.
ER69685
81xx only. Corrected an issue with Internal Loopback failure reported when link is up to an FCF.
ER69922
24xx CRC only. Resolve 8002 system error during DIF error processing.
ER70018
25xx and 81xx only. Corrected possible memory leak during clean-up of T10 CRC IOs with DIF Bundling enabled.
ER70038
25xx and 81xx only. Corrected false DIF error reported during T10 CRC transmit IO with DIF Bundling.
ER70149
Corrected Target XCB count returned by Get Resource Counts Mailbox Command (0042h).
ER70166
Corrected a RISC pause condition after the Diagnostic Echo Test (44h) mailbox command completed with an error status.
ER70319
25xx and 81xx only. Corrected a potential I/O timeout of T10 CRC IO when using DIF bundling.
ER70558
25xx and 81xx only. Corrected potential invalid PCIe access when aborting a T10 CRC IO when using DIF bundling.
ER70575
Corrected N_Port Handle assignment by firmware when Purex is enabled.
ER70664
81xx only. The firmware could incorrectly set bit 15 of N_Port Handle returned by the Get Port/Node Name List (75h) mailbox command.
ER70708
81xx only. Corrected a problem where the values supplied in the Set Timeout Parameters (32h) mailbox command were not honored.
ER70910
Prevent 8002 system error when processing a severely malformed IOCB.
ER70921
Corrected a RISC pause condition during SRR received notify ACK processing.
Error Report
Description
ER70970 ER71426 ER72657 ER71475
Customer-specific issues.
ER71034
24xx only: Improved link init time when using Inline Credit Extender in an N_Port- N_Port configuration.
ER71269
Fixed Loopback mailbox command timeout when Fibre Channel event (FCE) extended tracing is enabled.
ER72100
Corrected a problem that could result in a Task Management command timeout.
ER72270
Corrected handling of frames received with DID = 000000h.
ER72491
81xx only. Fix CTIO with terminate exchange bit returned good completion status (01h) after the CTIO is already completed. The CTIO with a terminate exchange bit should instead return an invalid receive exchange address (08h) completion status.
ER72571
MID builds only. Fix CTIO with terminate exchange bit failed with completion status=29h.
ER72921
81xx only. Corrected a problem that caused FDISC not generated by the firmware when Virtual Port Control IOCB (type=30h) is used to enable VP.
ER73048
MID only. Correct the cleanup of outstanding ELS requests during VP disable.
ER73090
MID only. Resolve RISC pause after cable pull or link event.
7.4 From 5.02.00 to 5.03.00
Changes
Error Report
Description
ER66811
Added feature to return LOGIN info via Mailbox Command 5Ah - Get Params, using type 7.
Mailbox0 - (4000h) normal completion - (4002h) DMA error - (4005h) error during command execution - (4006h) if unsupported type or DW Xfr requested is too small ( 28DW <.. ) data got truncated Mailbox1 - If Outgoing Mailbox 0 is 4005h, then Outgoing Mailbox 1 will have the following sub-code: 0002h - No IOCB Mailbox8 - DW Xfr Data (should be 28 for typical PLOGI, only valid for Type 7)
The format returned is according to FC-LS-2 (Fibre Channel - Link Services - 2), rev.2.00 - FLOGI/PLOGI payload minus ELS command code.
ER67656
8100 only. Added support for MPI heartbeat feature. Contact QLogic for details.
ER67716
8100 only. Changes to support additional MPI mailbox commands in the range 136h to 150h.
ER67727
2532/8100 CRC. Implemented CTIO Type CRC_2 and support DIF bundling on CTIO CRC IOCBs.
ER68875
2532 SB2 only. Return the lower 16-bit of current RBC count in Receive IU and Add Buffer IOCBs.
• For IOCB type 0x4D, the lower 16-bit of the counter is stored at offset 0x3E to 0x3F. • For IOCB type 0x4C, the lower 16-bit is stored at offset 0x1C to 0x1D.
NOTE: This feature will be documented in the upcoming SB-4 spec.
Bug Fixes
Error Report
Description
ER62856
MID only. Do not report RSCN for VPs that have been disabled. Previously, the firmware generated 8015 AEN with an invalid vpindex.
Error Report
Description
ER67220
2532/8100 CRC T10. Resolved bad FCP_DATA sequence due to incorrect re- initialization of the CRC context for Header mode.
This affected T10 write commands with multiple FCP_XFER_RDYs.
ER67210
Removed zeroed optional association headers from RRQ payload.
ER67333
24xx/2532 only. Corrected a problem in PLOGI ACC processing that could result in failure to respond to a subsequent PRLI.
ER69214
8100 only. Changed login/logout IOCB processing to correctly format a LOGO sent to the fabric controller.
ER69068
Resolved a Fatal Firmware Error (8002h) due to a race condition when the exchange timer expires at the same time FCP_XFER_RDY is received.
ER68914
8100 only. Changed link down handling to prevent a stall in received FCoE frame processing.
ER68488
Prevented Fatal Firmware Error (8002h) when processing an invalid ELS response type. This problem could occur if a switch sent an erroneous ELS response to a CT pass-thru request.
ER68339
8100 only. Fixed a hang that could occur when processing a new request for an FCP2 capable device after a link status change.
ER68257
2532/8100 only. Resolved intermittent Fatal Firmware Error (8002h) and FKA failures during Flash access.
ER67623
Modified RNID processing to correctly handle a response with a "Specific Identification Data Length" field of zero.
ER67568
2532/8100 CRC T10. Changed buffer pointer validation to prevent erroneous 8002 system errors.
ER67345
24xx/2532 only. Fixed a Fatal Firmware Error (8002h) caused by a problem cleaning up after a port discovery timeout.
ER67181
8100 only. Prevented accidental overwrite of the PortName within a port descriptor data structure. Problem could occur during the execution of mailbox commands 30h, 31h, 51h, or 60h.
ER67159
Fixed 200ms delay for Command Type 6 IOCBs when residual underrun occurs, and FCP_RSP DMA is enabled.
ER69146
8100 only. Resolved intermittent resource allocation failures in Read SFP mailbox command (31h). Improved failure sub code reporting in mailbox 1 for both Read(31h) and Write(30h) mailbox commands.
ER67799
Corrected ADISC ELS check for ELS passup and fixed potential bad pointer when building ELS frame.
ER67690
8100 only. Fixed mailbox command Diagnostic Loop Back failures with Status 4005 and Subcode 0x17.
Error Report
Description
ER67062
8100 only: Fix erroneous discard of a valid FIP VLAN Notification frame when the frame does not have an IEEE 801.2 Q Tag and the FIP descriptor list length is greater than 8 (words).
ER67479
24xx/2532 only. Improved firmware handling of I2C SFP interface to better support some SFPs.
7.5 From 5.01.00 to 5.02.00
Changes
Error Report
Description
ER55377 ER65196 ER66011 ER65528
Customer-specific changes.
ER65051
8100 only. Report NIC driver attached status in Get firmware State Mailbox Command (069h). For details, see the 8100 Series Fibre Channel Firmware Interface Specification, rev C.
ER65184
8100 only. Firmware will return parameter error (4006h) if the Initialize Firmware Mailbox Command (060h) or Initialize Firmware Multiple IDs Mailbox Command (048h) specifies use of the optional Extended Initialization Control Block and provide a length of zero bytes.
ER65220
8100 only. Changed the Perform Implicit LOGO Mailbox Command (072h) to allow the Perform Logout for All Ports across All FCFs option (bit 1 of incoming Mailbox Register 1) in single FCF configurations.
ER65589 ER65593 ER65595 ER65605 ER65805
8100 only. Added FIP Version 1 support.
ER66061
Added a feature to reject PRLI from Fabric Control (FFFCxx) when target mode is disabled. To enable this option, set bit 7 of Mailbox 2 in the Set Additional Firmware Options Mailbox Command (0038h).
ER66125
8100 only. Changed Get Link Status/Read Port Status Mailbox Command (06Bh) and Get Link Statistics and Private Data Mailbox Command (06Dh) to return counters consistent with the FCoE Link Error Status Block (LESB). Figure 3-4 of the 8100 Series Fibre Channel Firmware Interface Specification now contains the following counters: Link Failure Count, Virtual Link Failure Count, Missing FIP Keep Alive or Discovery Advertisement Count, Symbol Error During Carrier Count, Error'd Block Count, and Frame Check Sequence Error Count.
Bug Fixes
Error Report
Description
ER63706
MID only. Fixed an issue to prevent invalid VP misconfigurations that can result in a Fatal Firmware Error 8002h.
Error Report
Description
ER64335
Corrected DMA Error checking logic during Loopback Mailbox Command (0045h).
ER64498
8100 MID only. Prevent transmission of ELS requests before receipt of FLOGI accept.
ER64513
Fixed potential hang due to mishandling of completer aborts during transmit DMA.
8100 only. Corrected ELS and BLS timeout units conversion when processing Mailbox Commands Get Timeout Parameters (0022h) and Set Timeout Parameters (0032h).
ER65165
8100 only. Corrected an issue after External Loopback was performed that prevented FIP from completing.
ER65232
SB2 only. Corrected a condition in RRQ processing that could result in a Fatal Firmware Error (8002h) after receipt of an ABTS.
ER65415
8100 only. Fixed an issue that caused a rediscovery of FCFs if FIP FLOGI timed out.
ER65757
Corrected a problem in target mode operation during confirmation processing that could result in a Fatal Firmware Error 8002h.
ER65802
24xx and 2532 only. Corrected auto-negotiation algorithm that would restore the link at the previous speed instead of the maximum speed.
ER65980
8100 non MID only. Corrected a condition where the firmware state would not become Ready after switch port was shutdown and restored.
ER66043
8100 only. Retry FIP VLAN Discovery after FIP Discovery Solicitation fails to find a primary FCF.
ER66045
Return LoginState in IO Parameter 1 when Login/Logout IOCB PRLI IO Parameter 0 = 4 (Command Failed).
ER66068
2532 and 8100 MID only. Corrected VP Index range checking during processing of VP Control IOCB.
ER66082
Corrected Firmware Error reported during Purex IOCB processing if the Port Database for the target device had been initialized.
ER66204
8100 only. Fixed detection of EP device.
ER66553
MID only. Corrected a problem which could result in LOGO sent with SID=000000 or incorrect reporting of VP status after a VP is disabled.
ER66755
2532/8100 MIDQ only. Resolved a long delay in processing Command Type 6 IOCBs after link level fault injection.
ER66803
Fixed RISC pause condition when using T10 CRC with DIF_bundling.
7.6 From 5.00.00 to 5.01.00
Changes
Error Report
Description
ER61070 ER62265 ER62894 ER63194 ER63873
Customer-specific changes.
ER62531
2532 and 8100 only. Add DSD chaining support to command CRC type IOCBs.
ER63872 ER64455
8100 only. Updated Immediate Notify to reflect format described in the firmware spec. For details, see the 8100 Series Fibre Channel Firmware Interface Specification Rev C.
ER64026
8100 only. Implement FIP VLAN Discovery.
ER64342
8100 only. When detected, report MPI configuration error and reason code in Get Firmware State Mailbox Command (069h). For details, see the 8100 Series Fibre Channel Firmware Interface Specification Rev C.
ER64391
8100 only. Added new error completion codes to Restart MPI Mailbox Command (03Dh). For details, see the 8100 Series Fibre Channel Firmware Interface Specification Rev C.
ER64406
8100 only. Implement SFP Read/Write Mailbox Commands (031h and 030h). For details, see the 8100 Series Fibre Channel Firmware Interface Specification Rev C.
ER64497
8100 only. Modify Report ID Acquisition IOCB to return subcode for status 0x01, Unable to acquire ID, for FDISC. The subcode is returned at offset 10h.
ER64672
8100 only. Update Get DCBX Parameters Mailbox Command (051h) to match latest spec. For details, see the 8100 Series Fibre Channel Firmware Interface Specification Rev C.
ER64673
8100 only. Implement Get XGMAC Statistics Mailbox Command (07Ah). For details, see the 8100 Series Fibre Channel Firmware Interface Specification Rev C.
ER64732
8100 only. Return SFP status information. See Asynchronous Event 8012h and Mailbox Commands 05Dh, 048h, 060h, and 069h. For details, see the 8100 Series Fibre Channel Firmware Interface Specification Rev C.
Bug Fixes
Error Report
Description
ER63856
8100 only. Corrected handling of FLOGI Timeout and Reject processing by using Retry Count and Timeout as specified in Initialize Firmware Control Block.
ER64176
Corrected a condition where an Immediate Notify could be sent to the system driver when a VP is not configured for Target Mode operation.
ER64251
Corrected cleanup of pending Transmit Data requests across fault injection.
Error Report
Description
ER64265
8100 only. Corrected a potential firmware hang condition after processing an ELS timeout or recovering from an internal error.
ER64315
SB2 only. Corrected a condition where the System Defined 1 field of an IOCB being returned to the system driver may be overwritten.
ER64377
8100 only. Correct an issue with Flash Access Mailbox Command (003Eh).
ER64435
8100 only. Corrected potential FCoE traffic stall after Port Reset completes.
ER64454
8100 only. Fix FIP Failure to find FCF after a number of cable pulls/insertions into different FCF ports.
ER64507
8100 only. Get FCF List Mailbox Command (050h) may fail to find valid FCF Index.
ER64520
8100 only. Corrected false Loopback errors reported during internal and external tests.
ER64567
Corrected potential RISC pause when PUREX is enabled.
ER64585
8100 only. Fixed incorrect Destination MAC address in FIP FLOGI request after an FCF Fabric name change.
ER64590
8100 only. Allow primary port to be discovered via FDISC after it received a Clear Virtual Link or Fabric LOGO and another Virtual Port becomes the master.
ER64705
2400/2532 only. Corrected a condition where a FCP RSP could be transmitted across a LIP and before the discovery timer expires in private loop topology.
ER64902
8100 only. Corrected Firmware hang condition after receiving an ABTS.
7.7 From 4.06.00 to 5.00.00
Changes
Error Report
Description
ER62857
MID only. The firmware now returns a Port Unavailable (28h) Completion Status if the VP Index fails validation during a SCSI Task Management request.
ER62858
MID only. The firmware now allows Get VP Database Mailbox Command (49h) regardless of VP Status.
ER63650
SB2 only. The firmware now allows Get Link Status Mailbox Command (06bh) to complete even though Process Login has not completed.
Bug Fixes
Error Report
Description
ER61666
Fixed an issue to prevent initiating an LR upon a Transmit timeout while the firmware services other requests.
Error Report
Description
ER61682
Fixed an issue that delayed starting new Transmit requests if a Transmit error is pending.
ER62000 ER62172
Corrected the auto-negotiation algorithm that could prevent the link from establishing when connected to a switch.
ER62715
Corrected CTIO handling when link is down and CTIO received with an Exchange Address of FFFFFFFFh.
ER62798
MID only. Corrected various issues relating to VF support.
ER62826
Corrected issues found with VF and Fabric LOGO processing. Also corrected the valid VP Count range to 1-254.
ER62886
MID only. Corrected Source and Destination Address on an SCR retry.
ER62952 ER63400
Completed various FCE tracing fixes.
ER63104
Customer-specific fix.
ER63488
Corrected IDLE character to ArbFF when connected at 8Gb rate.
ER63563
Corrected an issue where a Mailbox or Mailbox IOCB request would not complete if a Fabric LOGO occurred.
ER63564
DISK CRC only. Corrected a RISC Pause condition reported during cable pull testing.
ER63790
Fixed an incorrect Response In Pointer reported in the RISC to Host Status Register when running in ZIO mode.
ER63913
2532 MID multiple queue only. Corrected a link credit issue that resulted in decreased performance.
7.8 From 4.05.00 to 4.06.00
Changes
Error Report
Description
ER60036 ER60250
2532 only. Added support for Virtual Fabrics. Contact QLogic for API changes to support VFs.
ER61654 ER61694 ER61837 ER62184
Customer-specific change.
Error Report
Description
ER61930
MID only. Added feature to allow the firmware to perform SNS Login and SCR registration for virtual ports. This feature is enabled by setting bit 6 of the Options field during Initialize Firmware - Multiple IDs Mailbox Command (048h). Added the following status/substatus values to Report ID Acquired IOCB:
VP Status
Description
3
SNS Timeout. See byte offsets 23:20 for Sub-status.
4
SNS LS_RJT (Reason/Explanation/Vendor Unique in IOCB byte offsets 23:20).
5
SCR Timeout. See byte offset 23:20 for Sub-status.
6
SCR LS_RJT (Reason/Explanation/Vendor Unique in IOCB byte offsets 23:20).
Bug Fixes
Error Report
Description
ER60623
MID only. Process received LOGO from F_Port. The associated Port Database Changed (8014h) asynchronous event will differ from a LOGO received from an N_Port as follows:
Outgoing Mailbox
N_Port
F_Port
0
0 8014h
8014h
1
N_Port Handle
7FEh
2
0007
0007
3
0Bh/VPIndex
1Ah/VPIndex
ER61522
MID only. Corrected validation of VP Index received in a CT Pass-Through request.
ER61591
Corrected verification of RX_ID in received ABTS frame.
ER61659
Disk CRC only. Corrected inadvertent drop of received XFER_RDY. This problem was introduced as a result of ER60318.
ER61757
Corrected Fatal Firmware Error 8002h when firmware received back-to-back SRRs for the same exchange.
ER61763
Corrected Fatal Firmware Error 8002h when an invalid FAN is received and Disable Automatic PLOGI option is selected.
ER61765
Populate hard address field in ADISC when previous address bit is set when the ISP is operating in a loop topology.
ER61775
24xx only. Improved link recovery after LR/LRR when using Inline Credit Extender.
ER61890
Mercury Converged Network Adapter only. De-Register MAC address associated with a logged out Virtual Port.
ER62084
Corrected upper 16 bits of receive exchange address when CTIO Error completion status is returned.
ER62118
Corrected Fatal Firmware Error 8002h during target mode operation when attempting to transmit a FCP RSP after fault injection.
Error Report
Description
ER62321
A Command Parameter Error will be returned for a Login/Logout IOCB received with a non reserved N_Port Handle with a reserved Port ID.
ER62348
MID only. Corrected potential issue with sending a frame with incorrect Port/Node Name.
7.9 From 4.04.00 to 4.05.00
Changes
Error Report
Description
ER60313 ER60909 ER61325 ER61654
Customer-specific change.
ER60321
2532 only. Added the ability to specify a maximum Fibre Channel Link speed to be negotiated. This feature is enabled by bit 12 of the Initialize Firmware Control Block’s Firmware Option 3. When this bit is set to 1, firmware will negotiate the FC data rate from the given max speed specified by driver in bits 15-13 of the Initialize Firmware Control Block’s Firmware Options 3 field to two speeds down to what the SFP allowed.
This option can also be set in the Data Rate Mailbox Command (05dh). When incoming mailbox 1 is set to 03h, firmware forces a loss of sync, restarts link initialization, and negotiates the FC data rate from the given max speed specified by driver in incoming mailbox 2 to two speeds down to what the SFP allowed.
ER60400
Allow system driver to send LOGO ELS via ELS Pass-Through IOCB using an N_Port Handle of FFFFh.
ER61208
MID only. Return Command Parameter Error (4006h) if the number of requested VP’s exceeds the limit when issuing Initialize Firmware – Multiple-IDs Mailbox Command (048h).
ER61461
2432 only. Disable PCIe Completion Timeout. PCIe Completion Timeout has been disabled to address issues seen on certain systems where PCIe completion could take over 50ms.
Bug Fixes
Error Report
Description
ER59740 ER60612
MID only. Corrected problems related to fault injection.
ER60127 ER60326 ER60610 ER60633
MID only. Various fixes to improve detection and processing of topology changes.
ER60248
Corrected timing of when RRQ is issued after ABTS ACC is received.
Error Report
Description
ER60318
Corrected Out-of-Order handling of overlapped or repeating received XFR_RDY frames.
ER60336 ER61222 ER61223
2532 Disk CRC only. Various Disk CRC changes to remove Fatal Firmware errors (8002h) being reported.
ER60565
MID only. Corrected a problem where a LOGO ELS could be sent to a port that was not logged in.
ER60566
MID only. Corrected a problem where a FLOGI/FDISC would not be sent to the switch after a previous FLOGI/FDISC completed with an ELS RJT.
ER60568
MID only. A PLOGI could be rejected for a Virtual Port even though the Primary Port parameters have not changed.
ER60569
MID only. Corrected a problem where an incorrect number of acquired AL_PAs could be reported during the LIRP and LILP phases of loop initialization.
ER60571
MID only. Login/Logout IOCB completion status was incorrect when no FLOGI ACC ELS had been received.
ER60572
Corrected a Fatal Firmware Error (8002h) when a CTIO IOCB with Confirmation Satisfied is received when the FCP_RSP has not been sent yet. The CTIO will be returned with a completion status of Invalid Request (06h).
ER60576
MID only. Corrected handling of incoming frames while waiting for LOGI ACC ELS for the primary port.
ER60637
Corrected a problem when attempting to abort an ELS Pass-Through operation when a PLOGI is received that changes the ports D_ID.
ER60698
Class 2 only. Corrected Fatal Firmware Error (8002h) reported when attempting to abort transmit operations.
ER60877
Corrected timer values used with link recovery.
ER61007
Improved handling of receiving an ABTS for a CT Pass-Through exchange.
ER61155
Corrected a problem with aborting IOs for the incorrect LUN when a LUN Level Task Management Function is active.
ER61187 ER61216
MID only. Ensure that Buffer-Buffer Credits are not modified when processing FDISC or FDISC-ACC.
ER61200
MID only. Correctly track changing of local 24-bit ID during cleanup.
ER61465
Handle race condition of completing transmit of PLOGI-ACC and receiving PRLI.
7.10 From 4.03.02 to 4.04.00
Changes
Error Report
Description
ER56370 ER58608 ER59978
Customer-specific change.
ER59630 ER59631
Corrected failures reported by Loopback Mailbox Command (45h) and Echo Mailbox Command (44h). Added sub-error codes to Outgoing Mailbox 3 of the Echo Command to match the Loopback Command.
Bug Fixes
Error Report
Description
ER58251 ER58760 ER58761
Disk CRC only. Corrected handling of frames received out of order in target mode.
ER58532
2532 Disk CRC only. Corrected condition where the firmware would overwrite the IOCB Entry Status field when the device receives invalid IOCBs.
ER58533
2532 Disk CRC only. Fixed a condition that could result in false DIF Errors when receiving runt block data.
ER58752
Disk CRC and 2532 only. Corrected an issue with multi-sequence DIF Remove functionality.
ER58783
2532 only. Corrected a RISC pause that occurred when optional external memory is present.
ER58802
Corrected endianess of RNID user defined data field.
ER58897
Set correct Immediate Notify IOCB sub-code during fault injection.
ER59100
Improved handling of switches that transition link from F-FL-F when the device is directly connected to a switch port.
ER59279 ER59431
Corrected issues relating to the EHAFT feature.
ER59385
Corrected a target mode issue where an ATIO Queue update interrupt would not be posted when using a small ATIO queue.
ER59503
Corrected a Fatal Firmware Error (8002h) reported when ISP receives FCP_RSP with a payload length greater than 240 bytes. This problem would occur when Command Type 6 IOCB is used with the option to DMA the FCP_RSP payload to the host is enabled.
ER59793
2532 only. Corrected the ending memory address reported by About Firmware Mailbox Command (08h) when external memory is present.
ER59989
2532 only. Corrected the Report Link Statistics information for Loop topology.
Error Report
Description
ER60017
SB2 only. Corrected a problem where the firmware was clearing the N_Port Handle field of a SB2 Send IU IOCB.
ER60067
Disk CRC and 2532 only. Corrected false DMA error reported when using CTIO Type 7 IOCB (Target Mode) with Status Mode 2 selected.
ER60126
Fixed a problem that may cause a target level Task Management Function to fail while a LUN Level Task Management Function is outstanding.
ER60256
MID and 2532 only. Corrected a Fatal Firmware Error (8002h) reported after adapter side fault injection.
ER60301
Corrected a condition where the local loop would not recover after a transmit error was encountered.
7.11 From 4.03.01 to 4.03.02
Changes
Error Report
Description
ER59755
2532 only. Enabled additional FC SerDes parameters to be set via Flash for mezzanine cards.
Bug Fixes
Error Report
Description
N/A
None
7.12 From 4.03.00 to 4.03.01
Changes
Error Report
Description
ER58635
2532 only. Added support for mezzanine adapters Added a new bit, Embedded HBA, in Flash to indicate an adapter that does not use SFP+, and transmits FC signal over a copper backplane or mid-plane.
Bug Fixes
Error Report
Description
ER58617
2432 only. Corrected a condition where Mailbox Commands issued to Function 1 would not complete after issuing Stop Firmware Mailbox Command (14h) to Function 0.
ultimate logo stack white on blue_jpg.jpg 8 Trademarks
Accelera, Accelerating Cluster Performance, FastFabric, InfiniCon Systems, InfiniNIC, InfiniPath, InfiniView, Intelligent NIC, Networking University, NetXen, QLogic, the QLogic logo, ReadyPath, SANdoctor, SANsurfer, and SilverStorm are registered trademarks of QLogic Corporation.
To the extent a name or logo does not appear on this list does not constitute a waiver of any and all intellectual property rights that QLogic Corporation or its subsidiaries has established in any of its product, feature, or service names or logos. All other brand and product names are trademarks or registered trademarks of their respective owners.
9 Notices
Information furnished in this document is believed to be accurate and reliable. However, QLogic Corporation assumes no responsibility for its use, nor for any infringements of patents or other rights of third parties which may result from its use. QLogic Corporation reserves the right to change product specifications at any time without notice. Applications described in this document for any of these products are only for illustrative purposes. QLogic Corporation makes no representation nor warranty that such applications are suitable for the specified use without further testing or modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.
10 Contacting Support
Please feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase of integration for assistance. QLogic Technical Support can be reached by the following methods:
Multi-boot Image for 8Gb FC HBAs Release Notes Package Version MB_2.32-4
This software license applies only to QLogic customers. QLogic Corporation. All rights reserved.
Table of Contents
1. Version 2. 8Gb BIOS 3. 8Gb EFI 4. 8Gb FCode 5. Trademarks 6. Notices 7. Contacting Support
1. Version
These release notes describe the changes, fixes, known issues, and release details that apply to the multi-boot package for 8Gb HBAs, version MB_2.32-4. This package is a compressed file that contains:
* BIOS version 2.16 * FCode version 2.27 * EFI version 3.13 * Firmware version 5.03.06
Rev 1.00 Jan.20, 2005 Initial release. Rev 1.01 Feb.18, 2005 Added code to put Port ID of device in IOCB. Rev 1.02 Mar.28, 2005 Added support for Serial Link Control. Addded code to display slot, bus number and function in CTRL-Q utility. Rev 1.03 Apr.18, 2005 Fixed bug when no drives attached and connected to switch. Added code to reset ISP if ISP is paused when ISR is called. Rev 1.04 June 8, 2005 Fixed bug in CTRL-Q utility that caused adapter id to be displayed at invalid id's. Added code to set Write Protect in Flash Status reg. Fixed bug in CTRL-Q utility where EAX reg was being corrupted by timer interrupt routine. Fixed bug in setting up LUN field in IOCB. Fixed bug in not setting port ID when connected to a switch. Rev 1.05 Sept 27, 2005 Changed code to suppress padding firmware version with leading zero's. Fixed bug in setting data direction flags in IOCB for 'seek command'. Changed code to not count device if device disabled by system BIOS. Fixed bug in setting flash Write Protect. Rev 1.06 Oct. 13, 2005 Fixed bug where anykey could invoke Fastutil. Rev 1.09 Nov. 22, 2005 Changed buffer request size to 2056 bytes for 'Report Luns' command. Fixed bug where GAN_NXT IN_ID was not always being set to zero causing GAN_NXT to fail. Rev 1.10 an. 31, 2006 Added check for optional boot mode flag to allow code to configure 1 drive/port when enabled. Bit 6 of host parameters in NVRAM is set to enable this mode. Fixed bug when Spinup-Delay and link is down. Added code to not display Data Rate option in CTRL-Q for QME2462. Rev 1.11 Feb. 7, 2006 Added support for interrupt polling. This option is controlled by bit 7 of NVRAM Host Parameters and by new Advanced Settings option in CTRL-Q. Rev 1.12 Feb. 21, 2006 Changed format of PnP string to display when Opt Boot Mode enabled in NVRAM. Added check for ELS reject status from Login IOCB. Rev 1.13 Apr. 04, 2006 Fixed bug in not always setting port id for logout IOCB. Changed code to support up to 16 adapters and 16 drives. Rev 1.14 Apr. 17, 2006 Changed code to ignore CLP '_hss' string. Rev 1.15 Apr. 20, 2006 Added code to wait for Login to complete when login pending status detected. Rev 1.16 May. 4, 2006 Fixed bug in not setting up Luns/Target in CTRL-Q. Added code to support Restore Default option CLP string (PCI3.0 BIOS only). Changed timeout value waiting for Linkup status from 6 seconds to 23 seconds. Rev 1.17 June 29, 2006 Added support for restoring defaults using CLP string (Pci3.0 only). Optimized code waiting for Linkup status. Added code to use Memory Map I/O for PCI express. Added code to check for correct Max Payload Size on QLE2464. Rev 1.18 July 19, 2006 Added code to load Nec switch port 1 and 2 pci config regs offset 68h with port 0 config offset 54h value. Fixed bug where task attributes in IOCB type 7 were not always being initialized. Rev 1.19 July 24, 2006 Fixed bug in CTRL-Q utility configuring Luns using Report Luns data when lun list has more lun entries after lun 255. Rev 1.20 Aug 2, 2006 Added code to support QLE2xx. Rev 1.21 Aug 24, 2006 Fixed bug in CTRL-Q cursor positioning for some user input displays. Rev 1.22 Sept 11, 2006 Added support for 'exit' CLP string. Changed CLP string to support new format: 'PermanentAddresses' was changed to 'PermanentAddress. Rev 1.23 Oct 16, 2006 Fixed bug in not setting rc_hba when different adapter types installed in system. Rev 1.24 Nov 29, 2006 Removed Extended Error Logging option from CTRL-Q. Removed code to use Memory Map I/O for PCI express. Rev 1.25 Dec 12, 2006 Added code so that set Defaults only to restores factory setting when value was modified by CLP string Rev 1.26 Dec 20, 2006 Fixed issue with the handling of CLP WWNN string. Also added code to always set firmware nodename optiom when set Default CLP is received. Rev 1.27 Feb. 26, 2007 Added support for Set Capabilities CLP string. Added code to load PLX switch port 1 and 2 pci config regs offset 68h with port 0 config offset 54h value (this is same code used for NEC switch). Rev 1.28 Apr. 12, 2007 Added code to check if need to restore HBA default portname. Added check for command fail status after login cmd. Restored code to read block 0 to determine drive geometry. Added NVRAM option (host_params bit 8) to enable support for HP boot order. Fixed bug in handling CLP Set Capabilities data. Rev 1.29 May. 22, 2007 Restored CTRL-Q Lun per Target option and changed text from 'Boot order' option to 'Controller order'. Rev 2.00 Dec. 03, 2007 Added support for ISP2532. Rev 2.01 Jan. 17, 2008 Added support for 1Gb data rate for 4Gb HBA. Rev 2.02 Feb. 18, 2008 Changed code to clear 'Disable Serdes' flag for CLP string Restore Default. Rev 2.03 Mar. 12, 2008 Added support for ISP8423. Added code to support new CLP 'set capability' spec. Rev 2.04 Mar. 23, 2008 Changed code to not used bit 13 of Host parameters. This avoids potential confict with inbox driver. Rev 2.05 Jun. 3, 2008 Added code to allow 2 min for link to come up when spinup delay enabled. Added code to poll for keyboard status. Removed external Loopback test option for ISP8432. Added check if IO support valid. Added check to CLP set_capablity string for the correct HBA port. Rev 2.06 Jun. 18, 2008 Added support for new CLP 'set capability' serial link spec for ISP2532. Rev 2.07 Sept. 3, 2008 Added additional error message for Verify Disk utility when device does not support SCSI cmd 2fh. Add support for Extended HBA CLP strings. Rev 2.07.6 Sept. 12, 2008 Fixed bug with 'restore netport defaults' when restoring NPIV's. Added code to reset ISP before accessing NVRAM the first time. Rev 2.07.8 Oct. 22, 2008 Added support for IDT PCIe switch Fixed bug in restoring NPIV after updating with CLP. Rev 2.08 Oct. 30, 2008 Removed TEST ONLY from BIOS banner. Rev 2.09 Dec. 02, 2008 Added code to save some pci data. Added new option to Advanced Option menu in CTRL-Q for Virtual Fabric Enable/Disable. Rev 2.10 Feb. 24, 2008 Added support for ISP8001 Added check for INT Polling before updating interrupt controller(PCI3.0) Fixed bug where eax register was being corrupted in nvram_config routine. Removed option in CTRL-Q for Virtual Fabric Enable. Fixed cosmetic bug in displaying selectable boot lun in CTRL-Q utility. Rev 2.11 Apr. 28,2009 Fixed issue with setting up Init FW MB command for using Extended Init Control Block Added option in CTRL-Q utility for Primary FCF VLAN ID for ISP8001 HBA. Added code to check version field of Extended ICB. Added code to correctly identify pci switch on 4 port HBA's. Changed code to suppport Loopback mode with new version of FW. Rev 2.12 May, 15,2009 Changed code to handle HSS CLP vendor id 3 same as vendor id 2. Rev 2.13 July 16, 2009 Added code to save backup copy of VPD/NVRAM data. Rev 2.14 Oct 9, 2009 Changed code to use FS segment register instead of GS in find_device routine. Change code to preserve MSB of WWPN Set Capablity CLP when updating WWPN/WWNN. Rev 2.15 Nov 23, 2009 Added code to handle 'About FW' mailbox command timeout. adapter. Rev 2.16 Mar 16, 2010 Fixed bug in not setting Write protect for single port adapter.
Driver Name : Fibre Channel Driver for UEFI Version : 2.27 Date : 05/9/2010 OS platform : N/A FW version : See MultiBoot release notes for FW version. Efiutil Version : 2.86
Table of Contents I. Overview II. Enhancements III. Bug Fixes IV. Known Issues V. Additional Information
I. Overview
The following document provides details of the Fibre Channel UEFI driver version 2.27, Efiutil version 2.86.
II. Enhancements
None
III. Bug Fixes
Driver: * Removed Extra character and NULL string message from HII. (ER71174, ER71175) * Add support for 8GB data rate for 25xx family in HII form. (ER71118) * Add fix in driver to avoid to print driver messages on splash screen during system boot up. (ER71099) * Add support for HII Protocol. (ER55486) * Added fix to allow W2K8 boot from local disk when target is mapped in passive path. (ER70069) * Added fix to diplay firmware version info correctly in HII "Adapter info" menu. (ER71412) * Display error message in HII form if invalid HBA parameter value is set (Execution Throttle). (ER71533) * Fixed a bug that caused VPD version numbers to be displayed wrong. (ER70907) * Add fix for NULL string message displayed on Hx5 system. (ER71771) * The "Enable Loop ID" bit in the HII menu is now set correctly. (ER71885) * Rename "Reconnect and Exit from Main Menu" HII entry to "Exit from Main Menu".
Efiutil: * Add fix to avoid, overwriiting of orignal SERDES file, if user give wrong command. (ER69941) * Added fix to avoid, "unaligned reference fault", while updating flash. (ER69793) * Add support, to ignore locked fileds while updating firmware area. (ER69531) * Add fix to display firmware version correctly. (ER71468) * Add fix to display new firmware version correctly while updating multiboot image. (ER71468) * Add support for 82xx family in Adapter list. (ER69230)
IV. Known Issues
* In the HII menus, Adding/Deleting a Target/LUN will require a reboot for changes to take effect.
V. Additional Information
* Efiutil and the EFI Driver are a matched set. Always make sure that Efiutil and the EFI Driver are from the same release package.
version 3.13 03/26/10 * Change REV_LEVEL in rev_level.m4 from 3.13b9 to 3.13. Offical Release.
version 3.13b9 03/24/10 * Remove Explicit logout to fabric(FLOGO) in close-hardware, put in v3.13b3. * Restructure fcode source files. Add: isp-init.fth, p3-init.fth, mailbox.fth, properties.fth, structs.fth, regs-isp.fth, regs-p3.fth, utils.fth.
Version 3.13b8 03/09/10 * Add Parameter 1 debug display on login IOCB faliure if debug-logi? is set. * Add force-open-ok? test flag in open method. Default = true(no real change). * Change get-to-params to set boot-wt = 8 secs if boot-wait-time is disabled. * Fix bug in VPD fetch, introduced in v3.13b1. vpd-buf increased to 512 bytes. * Change cbuff back to non instance buffer. Instance has no effect on buffer:.
Version 3.13b7 03/04/10 * Remove Hard-RICS-reset from reset-risc method. Causes problems on QMI2582. * Remove Eddy test= Reset RX-Serdes after 5 secs wait for in isp-fw-ready?. * Make old-sb (old sec-buf) an instance value. Problem on M3000 (ER70453).
Version 3.13b6 03/02/10 * Add Reset RX-Serdes after 5 secs wait for in isp-fw-ready?. Plus add debug.
Version 3.13b5 03/01/10 * Add more debugging in isp-fw-ready?. Print fw-state each time in get-state. * Change getnum to use the 'accept' word and make cbuff an 'instance' buffer:.
Version 3.13b4 02/24/10 * Fix Explicit logout-device IOCB to include the ISP PortID and Port WWN. * Changed debug? flags: 4000= Got-R2H-intr, 2000= IOCB-Dump, 800= FW-Ready-wait.
Version 3.13b4 02/22/10 * Fix Explicit logout-device IOCB to include the ISP PortID and Port WWN.
Version 3.13b3 02/19/10 * Use OpenBIOS Toke Tokenizer to make isp2500/8100/8200. isp2400 uses SUN toker. * Add Sun-Style-Checksum option OpenBIOS Toke for all SUN isp2500/8100/8200. * Add Implicit logout-all and Explicit logout to fabric in close-hardware. * Add setting the FW ICB link-down-NOS/OLS value for isp2400/2500 (ER67806).
Version 3.13b2 02/11/10 * Change set-boot-wait-time to not affect link-down-to (timeout) for Fujitsu. * Change login-devices to not logout with FC_Initiators. * Change logout-device to use implicit Logout, not explicit. (Fix P3P problem)
Version 3.13b1 02/05/10 * Change set-boot-wait-time to be entered/display in decimal, not hex(Fujitsu). * Added OpenBIOS 'toke' Tokenizer to makefile. Now you can make either version.
Version 3.12 01/11/10 * No change to isp2500, fixed SSDID for Sun (SUNW,qlc) CNA QLE8142.
Version 3.11 12/11/09 * No change to isp2500, added support for Sun (SUNW,qlc) CNA QEM8152.
Version 3.10 12/02/09 * Change the name of the top level Fcode file from isp2xxx.fth to ispxxxx.fth. * Change makefile to include the creation of P3+ isp8200.xxxx.fc binaries.
Version 3.09 10/26/09 * Change REV_LEVEL in rev_level.m4 from 3.09b1 to 3.09. Offical Release.
Version 3.09b1 10/22/09 * Fix Node-Name-Option bit preservation in restore-default-settings. ER68181.
Version 3.08 10/19/09 * Change REV_LEVEL in rev_level.m4 from 3.08b1 to 3.08. Offical Release. * Remove patch of PCI header image size byte at offset 0x2c from init version.
Version 3.08b1 10/14/09 * Fix default WWNN & WWPN preservation in restore-default-settings. ER67924. * Fix stack bug when link down. Introduced in v3.05 set-phandle word. ER67926. * Add standard properties. Use m4 utility to automaticly create date string. * Add file rev_level.m4 which has the revision level strings only. * Remove "SFP state: Unknown" message (.isp) if the adapter is IBM mezz card. * Add FCoE & 4Gb IBM mezz cards QMI8142 QMC2462 QMI3472 QMI2472 to imezz? word. * Change messages "Login failed" to "Login Abort". "Error Subcode" to "Subcode". * Re-structure Flash/NVRAM access fnv-wd@/! words for the Netxen P3 integration. * Add 'make nx3031' to makefile for Netxen P3. #ifdef P3 used for delineation.
Version 3.08b1 09/25/09 * Add standard properties. Use m4 utility to automaticly create date string. * Add file rev_level.m4 which has the revision level strings only. * First version with some support for the Netxen P3 CNA.
Version 3.07 09/08/09 * Change version string from 3.07b2 to 3.07. Offical Release for IBM and SUN.
Version 3.07b2 09/04/09 * Fix read-cap16-cmd. Used when the LUN size is >2TB (i.e. #blocks > 32-bits). * Fix disk-test to work with large (>2TB) LUNs, where the LBA > 32-bits.
Version 3.07b1 08/28/09 * Remove command retry when 8048 AEN is received. Caused DMA error found by IBM. This was an old workaround put in vers1.08b2, before IOCB timeouts were set.
Version 3.06 08/19/09 * Change version string from 3.06b6 to 3.06. Offical Release for IBM. * Fix qlgc-debug? option for IBM. Use find-method on IBMs and $find on SUNs.
Version 3.06b6 08/18/09 * Add option for qlgc-debug? in nvramrc. If the diag-switch? is true, then the debug? flag is set is set to the value of qlgc-debug?.
Version 3.06b5 08/18/09 * Add lba64 large disk capability (read-blocks64 write-blocks64) for SUN only. * Add support for QEM3572, SSDID = x172, for SUN only. * Add mbox1 & mbox2 display for 8048 interrupt if debug-asyc? flag (01) is on.
Version 3.06b4 08/13/09 * Fix bug in IBM fcp-luns method for the Controller LUN-0 check, lun0-check.
Version 3.06b3 08/12/09 * Check Inquiry Qualifier field of Controller LUN-0 in IBM fcp-luns method.
Version 3.06b2 08/10/09 * Add more IOCB debugging, Add Erase Response-Queue in mapmem. Had stale data.
Version 3.06b1 08/08/09 * Add more debugging for IOCBs, dma-map-in/out, & wait-for-interrupts.
Version 3.05 08/04/09 * Change version string from 3.05b2 to 3.05 Offical Release for IBM.
Version 3.05b2 08/03/09 * Fix set-fc-address issue found with IBM ioinfo. PortID was not getting set. * Re-structure devicepresent.fth. Add set-phandle to set obp-target & obp-portid
Version 3.05b1 07/31/09 * Fix multiple close issue found with IBM ioinfo utility.
Version 3.04 07/22/09 * Change version string from 3.04b2 to 3.04 Offical Release. * Add alloc-sec-buf & free-sec-buf words with debugging messages.
Version 3.04b2 07/21/09 * Add "ibm,write-supported" property to disk child node, as per IBM's request. * Removed VPD validation from validate-nvram due to bug in update utilities. * Do not reallocate sec-buf when revert-wwns is called within the isp-probe. The revert-wwns method now calls my-revert-wwpn and my-revert-wwnn.
Version 3.04b1 07/20/09 * Fix enab-nvr-acc to alloc sec-buf & add disab-nvr-acc for BOFM words.ER66671. * Make use_backup? an "instance value", so it will always initialize as false.
Version 3.03 07/13/09 * Change version string from 3.03b2 to 3.03 Offical Release. * Added console messages when validate-nvram finds corruption & copies a sector. Version 3.03b2 06/22/09 * Change validate-nvram to validate both ports on Dual-port HBAs at probe time. * Fix init-flt-offsets to mask FLT attributes. Now it finds FW & Feature-key.
Version 3.03b1 06/12/09 * Add NVRAM backup Sector. Add validate-nvram at probe time to fix corruption.
Version 3.02 05/06/09 * No change, affected Schultz ISP8100 Fcode only.
Version 3.01 04/23/09 * No change, affected Schultz ISP8100 Fcode only.
Version 3.00 04/21/09 * No change, affected Schultz ISP8100 Fcode only.
Version 3.00b8 04/01/09 * Add unsupported message for set-connection-mode for IBM QMI2572/3572/2582.
Version 3.00b7 03/31/09 * Change set-data-rate menu to remove 8Gb selection if the HBA is a QMI2572.^M
Version 3.00b6 03/04/09 * Change boot-wait-time to start timer(fw-ready-wait) in isp-fw-ready? method. * Fix pgm-sec (pgm-params) to set cd-base = ld-base. ISP2500 & isp8100 only. * Change fix-rbios to check nvr-bad? before copying nvram to RAM.
Version 3.00b5 02/25/09 * Change link-down-timeout to boot-wait-time if bootwait-enable flag is true. * Changed era-code (used in ldfcode) to use /code to determine #secs to erase. * Add set-cd-base+siz (used for ldfcode) to replace set-ld-base & set-/dlc. * Fix function number mask, func#, on ISP2500 only.
Version 3.00b4 02/11/09 * Change all Flash offsets used by FLT from constants to values. ISP2500 only.
Version 3.00b3 01/21/09 * Add back IOBAR(x10) to reg property for ISP2500 that was removed in v2.04b1. This fix was in version 2.04 but was inadvertently dropped in version 3.00b1
Version 3.00b2 01/08/09 * Added set-boot-wait-time commnad for all 4 & 8Gb HBAs/CNAs. Add NVRAM Fcode 2-byte parameter, boot-wait-time, at ofs x15a & enable-bit(x20) at ofs x158. This was requested by Fujitsu, for disks that take longer to come online. * Added set-fc-sunid to set the NVRAM sunid bit. For internal use only.
Version 3.00b1 12/19/08 * Added more SCSI sense debugging. * Reworked interrupt service routines with more debugging.
Version 2.05 03/26/09 - Delayed release to IBM = v3.00b4 wo/boot-wait-timeout * Change set-data-rate menu to remove 8Gb selection if the HBA is a QMI2572. * Change all FLT Flash offset parameters from constants to values ISP2500 only. Version 2.04 12/03/08 * Change version string from 2.04b2 to 2.04 Offical Release. * Add debug message to init-flt-offsets " Init FLT offsets" for ISP2500 only. * Add back IOBAR(x10) to reg property for ISP2500 that was removed in v2.04b1.
Version 2.04b2 12/02/08 * Add FLT and FDT Flash access methods for ISP2500 only. * Remove set-bootid, set-boot-wwn, & releated qla only words from IBM version. * Added IBM debugging to BOFM words and set debug?=C00 if diag-switch is true. * Added max-payload bridge fix for 4-port QMI2564 HBA. Used Gil's method. * Fix get-mail to handle Response-Queue interrupts (stat=13) & add debugging. * Removed all Serial-Link-Control access/modify words from ISP2500 only.
Version 2.04b1 07/23/08 * Fix open to always return -1. Returning link-down fw-state fails on Serengetti * Remove IO-BAR (x10) from reg property for ISP2500 or later.
Version 2.03 06/30/08 * Change version string from 2.03b1 to 2.03 Offical Release.
Version 2.03b1 06/06/08 * Use complete NVRAM values for fwopt2 and fwopt3 in fw-init, initialize ICB. * ADD Sun QLE2560 and QLE2562 support, which have SSDIDs of 0x0170 and 0x0171.
Version 2.02 05/07/08 * Change version string from 2.02b3 to 2.02 (Offical Release). * Fix load-image to return error status so you can exit on failure. * Remove stop-fw from isp-probe method. It did nothing since FW is not loaded.
Version 2.02b3 04/17/08 * Change compatible property(IBM) to append to existing property, if it exists. * Change all references in the Fcode of 'HBA' to 'Adapter' (for QLE8000 CNA).
Version 2.02b2 04/14/08 * Fix compatible prop for IBM. Return DDDD value back to DevID in strings: pciVVVV,DDDD.SSSS.ssss.RR & pciVVVV,DDDD.SSSS.ssss. DDDD was = SSDevID.
Version 2.02b1 03/27/08 * Fix blank lines in list-wwns for set-boot-wwn command in qla-mode. ER59591. * Change the d-mbox (dump-mailbox) word to use the .4z data format macro.
Version 2.01 03/27/08 * Change version string from 2.01b2 to 2.01 (Offical Release). * Version 2.01b2 had no changes for ISP2500 8Gb HBA Fcode.
Version 2.01b1 03/03/08 * Add debug display of SFP state (mbox 2) if debug-fwait? (x800) is set. * Fix selftest mem-siz = x20000 (128KB) on IBM CFFe/CFFx mezz cards.
Version 2.00 02/15/08 * Change version string from 2.00b17 to 2.00 (Offical Release).
Version 2.00b17 02/07/08 * Modify ldfcode again to skip copy of WWN and checksum to BIOS-defaults area.
Version 2.00b16 02/05/08 * Modify ldfcode to copy all BIOS-defaults plus copy Model & DID to header. * Fix login-devices to return #ports, including non-target ports. This fixes Sun Bug ID 6645537, ER58525, where LUNs were not listed when Emulex present.
Version 2.00b15 01/29/08 * Fix target login problem with McData switch by adding GID_PT command. ER58769. * Modify ldfcode to Flash both Functions when file=Fcode-only on the ISP2500. * Modify ldfcode to poke BIOS default area of the MB-image with Model# & SSID.
Version 2.00b14 01/15/08 * Fix restore-default-setting to skip SSDID, OEM Specific Area, Feature Mask, and Model# copy to NVRAM. Also add revert-wwns on IBM. ER58465 & ER58509. * Replace load-stub-fw with stop-fw mbox command for PCIe 2400 HBAs. Firmware vers 4.00.25 or greater stop-fw command will do the same thing as stub FW. * Fix IBM BOFM bug where the default WWPN is lost if a new WWPN is written twice
Version 2.00b13 12/21/07 * Separate 2400/2500 Fcode into two isp2400/isp2500 binary output files. Remove isp2500? & use #ifdef ISP2500. Resulting in smaller 37KB image size. * Add use-cdb16? flag which is set in read-capacity if the target supports Large LBA. 16-byte CDBs are used only if use-cdb16? is set & LBA > 32-bits. ER58285. * Fix "chrp" string in papr-compliant? word (IBM BOFM support). * Change write-wwnn word to check for new-wwnn=0 (IBM BOFM support). * Add enab-nvr-acc to all 6 BOFM external words so they work on unopened dev.
Version 2.00b12 12/10/07 * Remove reset-risc in 2500 nvr-wd! & ldfcode that was put in 2.00b11.ER58002. There were too many side-effects from resetting the RISC during Flash writes. Now if FW is stopped, writes to Flash will fail before the Flash is erased. * Add init-chip? to sns-command & logout-devices for recovery from link-down. * Put ifp-abort back into wait-for-risc-int, which was taken out in vers 1.23.
Version 2.00b11 12/05/07 * Move clearing of flags link-up?, done-fw-init? port-updated? to reset-risc. This was for isp2500 set-boot-wwn failure because FW was stopped. ER58139.
Version 2.00b10 11/30/07 * Add reset-risc to 2500 nvr-wd! in case the FW is stopped. ER58002. * Change 2500 flash-cfg! (Flash config write) to use write-ram Mbox command. This will prevent the Flash erase from working if there's a mailbox problem.
Version 2.00b9 11/28/07 * Fix find-image to check for last-image bit and exit loop if found. ER57989. * Add reset-risc to ldfcode for the case when isp2500 FW was stopped. ER58002. * Fix init-fw problem. If NVRAM is blank, FW Option word-1 is not set in ICB.
Version 2.00b8 11/21/07 * Make BOFM support words external in IBM version. * Change my-wwnn@ to return WWNN based on current adapter WWPN. (IBM version) * Fix stop-risc bug. Clear done-fw-init? flag before calling mail. ER57926. * Fix 8Gb nvr-word! stack bug. It was not returning success? flag. ER57977.
Version 2.00b7 11/12/07 * Remove 'ibm,' from the BOFM support words for IBM. Also update property. * Add check-managed-wwn which checks for PAPR-compliant & san_wwn string in root prop " ibm,managed-address-types" and then reverts WWNs if necessary.
Version 2.00b6 10/18/07 * Changed makefile to create separate isp2400 & isp2500 images(PCI header only). * Fix drate-val (default Auto Data-Rate value) w/o shift for selftest. * Fix n-port topology device-present problem. obp-portied was not getting set. * Add stop-risc word (whch issues a Stop FW mbox command) for isp2500. the stop-risc is issued on close instead of the isp2400 load-stub-fw. * Add back architecture check (wrong-arch?) of PCI header DEVID during flashing. * Add rd-ram-wd and wr-ram-wd mailbox commands for debugging purposes. * Add BOFM support for the IBM version Fcode.
Version 2.00b5 09/24/07 * Combined 2400/2500 Fcode into a single binary output isp2x00 file. Use isp2500? word instead of #ifdef ISP2500. Resulting image size is now 38KB. * Changed Connection Mode & Data Rate debug messages during FW initialization.
Version 2.00b4 09/18/07 * Shrink code wherever possible. Remove unused words and shorten value names. * Fix find-fc method to add Func0 bc0_ofs. Otherwise it checksums Func1-fcode.
Version 2.00b3 09/07/07 * Add reset-risc to reopen-hardware method when init_link?=0, for INIT version.
Version 2.00b2 09/06/07 * Fix set-data-rate for ISP2500 to remove the 1 Gb/sec selection. ER56564. * Fix selftest to always use Auto-negoiate data-rate. ER56565. * Fix open for selftest to return OK status when link-down on a reopen. ER56566.
* Remove load-stub-fw method for ISP2500. A reset-risc is all that is needed.
* Change ISP2500 ld-code & ver-code methods to always use mbox DMA commands. * Fix version number in PCI header. Should be 2.00.
Version 2.00b1 08/28/07 * Add 2500 support with major change in NVRAM and Flash utilities.
* Change VPD address & data registers to be different values for ISP2500. * Add extra setting for 8Gb/sec in set-data-rate.
Started with ISP2400 Code Base, Version 1.27 08/21/07 qlgc_fw_fc_8g-mb2_32-4_windows_32-64_chg
Multi-boot Image for 4Gb FC HBAs Release Notes Package Version MB_1.90-3
This software license applies only to QLogic customers. QLogic Corporation. All rights reserved.
Table of Contents
1. Version 2. 4Gb BIOS 3. 4Gb EFI 4. 4Gb FCode 5. Trademarks 6. Notices 7. Contacting Support
1. Version
These release notes describe the changes, fixes, known issues, and release details that apply to the multi-boot package for 4Gb HBAs, version MB_1.90. This package is a compressed file that contains:
* BIOS version 2.16 * EFI version 2.27 * FCode version 3.13 * Firmware version 5.03.06
Rev 1.00 Jan.20, 2005 Initial release. Rev 1.01 Feb.18, 2005 Added code to put Port ID of device in IOCB. Rev 1.02 Mar.28, 2005 Added support for Serial Link Control. Addded code to display slot, bus number and function in CTRL-Q utility. Rev 1.03 Apr.18, 2005 Fixed bug when no drives attached and connected to switch. Added code to reset ISP if ISP is paused when ISR is called. Rev 1.04 June 8, 2005 Fixed bug in CTRL-Q utility that caused adapter id to be displayed at invalid id's. Added code to set Write Protect in Flash Status reg. Fixed bug in CTRL-Q utility where EAX reg was being corrupted by timer interrupt routine. Fixed bug in setting up LUN field in IOCB. Fixed bug in not setting port ID when connected to a switch. Rev 1.05 Sept 27, 2005 Changed code to suppress padding firmware version with leading zero's. Fixed bug in setting data direction flags in IOCB for 'seek command'. Changed code to not count device if device disabled by system BIOS. Fixed bug in setting flash Write Protect. Rev 1.06 Oct. 13, 2005 Fixed bug where anykey could invoke Fastutil. Rev 1.09 Nov. 22, 2005 Changed buffer request size to 2056 bytes for 'Report Luns' command. Fixed bug where GAN_NXT IN_ID was not always being set to zero causing GAN_NXT to fail. Rev 1.10 an. 31, 2006 Added check for optional boot mode flag to allow code to configure 1 drive/port when enabled. Bit 6 of host parameters in NVRAM is set to enable this mode. Fixed bug when Spinup-Delay and link is down. Added code to not display Data Rate option in CTRL-Q for QME2462. Rev 1.11 Feb. 7, 2006 Added support for interrupt polling. This option is controlled by bit 7 of NVRAM Host Parameters and by new Advanced Settings option in CTRL-Q. Rev 1.12 Feb. 21, 2006 Changed format of PnP string to display when Opt Boot Mode enabled in NVRAM. Added check for ELS reject status from Login IOCB. Rev 1.13 Apr. 04, 2006 Fixed bug in not always setting port id for logout IOCB. Changed code to support up to 16 adapters and 16 drives. Rev 1.14 Apr. 17, 2006 Changed code to ignore CLP '_hss' string. Rev 1.15 Apr. 20, 2006 Added code to wait for Login to complete when login pending status detected. Rev 1.16 May. 4, 2006 Fixed bug in not setting up Luns/Target in CTRL-Q. Added code to support Restore Default option CLP string (PCI3.0 BIOS only). Changed timeout value waiting for Linkup status from 6 seconds to 23 seconds. Rev 1.17 June 29, 2006 Added support for restoring defaults using CLP string (Pci3.0 only). Optimized code waiting for Linkup status. Added code to use Memory Map I/O for PCI express. Added code to check for correct Max Payload Size on QLE2464. Rev 1.18 July 19, 2006 Added code to load Nec switch port 1 and 2 pci config regs offset 68h with port 0 config offset 54h value. Fixed bug where task attributes in IOCB type 7 were not always being initialized. Rev 1.19 July 24, 2006 Fixed bug in CTRL-Q utility configuring Luns using Report Luns data when lun list has more lun entries after lun 255. Rev 1.20 Aug 2, 2006 Added code to support QLE2xx. Rev 1.21 Aug 24, 2006 Fixed bug in CTRL-Q cursor positioning for some user input displays. Rev 1.22 Sept 11, 2006 Added support for 'exit' CLP string. Changed CLP string to support new format: 'PermanentAddresses' was changed to 'PermanentAddress. Rev 1.23 Oct 16, 2006 Fixed bug in not setting rc_hba when different adapter types installed in system. Rev 1.24 Nov 29, 2006 Removed Extended Error Logging option from CTRL-Q. Removed code to use Memory Map I/O for PCI express. Rev 1.25 Dec 12, 2006 Added code so that set Defaults only to restores factory setting when value was modified by CLP string Rev 1.26 Dec 20, 2006 Fixed issue with the handling of CLP WWNN string. Also added code to always set firmware nodename optiom when set Default CLP is received. Rev 1.27 Feb. 26, 2007 Added support for Set Capabilities CLP string. Added code to load PLX switch port 1 and 2 pci config regs offset 68h with port 0 config offset 54h value (this is same code used for NEC switch). Rev 1.28 Apr. 12, 2007 Added code to check if need to restore HBA default portname. Added check for command fail status after login cmd. Restored code to read block 0 to determine drive geometry. Added NVRAM option (host_params bit 8) to enable support for HP boot order. Fixed bug in handling CLP Set Capabilities data. Rev 1.29 May. 22, 2007 Restored CTRL-Q Lun per Target option and changed text from 'Boot order' option to 'Controller order'. Rev 2.00 Dec. 03, 2007 Added support for ISP2532. Rev 2.01 Jan. 17, 2008 Added support for 1Gb data rate for 4Gb HBA. Rev 2.02 Feb. 18, 2008 Changed code to clear 'Disable Serdes' flag for CLP string Restore Default. Rev 2.03 Mar. 12, 2008 Added support for ISP8423. Added code to support new CLP 'set capability' spec. Rev 2.04 Mar. 23, 2008 Changed code to not used bit 13 of Host parameters. This avoids potential confict with inbox driver. Rev 2.05 Jun. 3, 2008 Added code to allow 2 min for link to come up when spinup delay enabled. Added code to poll for keyboard status. Removed external Loopback test option for ISP8432. Added check if IO support valid. Added check to CLP set_capablity string for the correct HBA port. Rev 2.06 Jun. 18, 2008 Added support for new CLP 'set capability' serial link spec for ISP2532. Rev 2.07 Sept. 3, 2008 Added additional error message for Verify Disk utility when device does not support SCSI cmd 2fh. Add support for Extended HBA CLP strings. Rev 2.07.6 Sept. 12, 2008 Fixed bug with 'restore netport defaults' when restoring NPIV's. Added code to reset ISP before accessing NVRAM the first time. Rev 2.07.8 Oct. 22, 2008 Added support for IDT PCIe switch Fixed bug in restoring NPIV after updating with CLP. Rev 2.08 Oct. 30, 2008 Removed TEST ONLY from BIOS banner. Rev 2.09 Dec. 02, 2008 Added code to save some pci data. Added new option to Advanced Option menu in CTRL-Q for Virtual Fabric Enable/Disable. Rev 2.10 Feb. 24, 2008 Added support for ISP8001 Added check for INT Polling before updating interrupt controller(PCI3.0) Fixed bug where eax register was being corrupted in nvram_config routine. Removed option in CTRL-Q for Virtual Fabric Enable. Fixed cosmetic bug in displaying selectable boot lun in CTRL-Q utility. Rev 2.11 Apr. 28,2009 Fixed issue with setting up Init FW MB command for using Extended Init Control Block Added option in CTRL-Q utility for Primary FCF VLAN ID for ISP8001 HBA. Added code to check version field of Extended ICB. Added code to correctly identify pci switch on 4 port HBA's. Changed code to suppport Loopback mode with new version of FW. Rev 2.12 May, 15,2009 Changed code to handle HSS CLP vendor id 3 same as vendor id 2. Rev 2.13 July 16, 2009 Added code to save backup copy of VPD/NVRAM data. Rev 2.14 Oct 9, 2009 Changed code to use FS segment register instead of GS in find_device routine. Change code to preserve MSB of WWPN Set Capablity CLP when updating WWPN/WWNN. Rev 2.15 Nov 23, 2009 Added code to handle 'About FW' mailbox command timeout. adapter. Rev 2.16 Mar 16, 2010 Fixed bug in not setting Write protect for single port adapter.
Driver Name : Fibre Channel Driver for UEFI Version : 2.27 Date : 05/9/2010 OS platform : N/A FW version : See MultiBoot release notes for FW version. Efiutil Version : 2.86
Table of Contents I. Overview II. Enhancements III. Bug Fixes IV. Known Issues V. Additional Information
I. Overview
The following document provides details of the Fibre Channel UEFI driver version 2.27, Efiutil version 2.86.
II. Enhancements
None
III. Bug Fixes
Driver: * Removed Extra character and NULL string message from HII. (ER71174, ER71175) * Add support for 8GB data rate for 25xx family in HII form. (ER71118) * Add fix in driver to avoid to print driver messages on splash screen during system boot up. (ER71099) * Add support for HII Protocol. (ER55486) * Added fix to allow W2K8 boot from local disk when target is mapped in passive path. (ER70069) * Added fix to diplay firmware version info correctly in HII "Adapter info" menu. (ER71412) * Display error message in HII form if invalid HBA parameter value is set (Execution Throttle). (ER71533) * Fixed a bug that caused VPD version numbers to be displayed wrong. (ER70907) * Add fix for NULL string message displayed on Hx5 system. (ER71771) * The "Enable Loop ID" bit in the HII menu is now set correctly. (ER71885) * Rename "Reconnect and Exit from Main Menu" HII entry to "Exit from Main Menu".
Efiutil: * Add fix to avoid, overwriiting of orignal SERDES file, if user give wrong command. (ER69941) * Added fix to avoid, "unaligned reference fault", while updating flash. (ER69793) * Add support, to ignore locked fileds while updating firmware area. (ER69531) * Add fix to display firmware version correctly. (ER71468) * Add fix to display new firmware version correctly while updating multiboot image. (ER71468) * Add support for 82xx family in Adapter list. (ER69230)
IV. Known Issues
* In the HII menus, Adding/Deleting a Target/LUN will require a reboot for changes to take effect.
V. Additional Information
* Efiutil and the EFI Driver are a matched set. Always make sure that Efiutil and the EFI Driver are from the same release package.
Release Notes for 4Gb FC HBAs (FCode) ================================================================
version 3.13 03/26/10 * Change REV_LEVEL in rev_level.m4 from 3.13b9 to 3.13. Offical Release.
version 3.13b9 03/24/10 * Remove Explicit logout to fabric(FLOGO) in close-hardware, put in v3.13b3. * Restructure fcode source files. Add: isp-init.fth, p3-init.fth, mailbox.fth, properties.fth, structs.fth, regs-isp.fth, regs-p3.fth, utils.fth.
Version 3.13b8 03/09/10 * Add Parameter 1 debug display on login IOCB faliure if debug-logi? is set. * Add force-open-ok? test flag in open method. Default = true(no real change). * Change get-to-params to set boot-wt = 8 secs if boot-wait-time is disabled. * Fix bug in VPD fetch, introduced in v3.13b1. vpd-buf increased to 512 bytes. * Change cbuff back to non instance buffer. Instance has no effect on buffer:.
Version 3.13b7 03/04/10 * Remove Hard-RICS-reset from reset-risc method. Causes problems on QMI2582. * Remove Eddy test= Reset RX-Serdes after 5 secs wait for in isp-fw-ready?. * Make old-sb (old sec-buf) an instance value. Problem on M3000 (ER70453).
Version 3.13b6 03/02/10 * Add Reset RX-Serdes after 5 secs wait for in isp-fw-ready?. Plus add debug.
Version 3.13b5 03/01/10 * Add more debugging in isp-fw-ready?. Print fw-state each time in get-state. * Change getnum to use the 'accept' word and make cbuff an 'instance' buffer:.
Version 3.13b4 02/24/10 * Fix Explicit logout-device IOCB to include the ISP PortID and Port WWN. * Changed debug? flags: 4000= Got-R2H-intr, 2000= IOCB-Dump, 800= FW-Ready-wait.
Version 3.13b4 02/22/10 * Fix Explicit logout-device IOCB to include the ISP PortID and Port WWN.
Version 3.13b3 02/19/10 * Use OpenBIOS Toke Tokenizer to make isp2500/8100/8200. isp2400 uses SUN toker. * Add Implicit logout-all and Explicit logout to fabric in close-hardware. * Add setting the FW ICB link-down-NOS/OLS value for isp2400/2500 (ER67806).
Version 3.13b2 02/11/10 * Change set-boot-wait-time to not affect link-down-to (timeout) for Fujitsu. * Change login-devices to not logout with FC_Initiators. * Change logout-device to use implicit Logout, not explicit. (Fix P3P problem)
Version 3.13b1 02/05/10 * Change set-boot-wait-time to be entered/display in decimal, not hex(Fujitsu). * Added OpenBIOS 'toke' Tokenizer to makefile. Now you can make either version. * Fixed bug introduced in ISP2400 v3.10. Defered word fmw_ofs, never defined.
Version 3.12 01/11/10 * No change to isp2400, fixed SSDID for Sun (SUNW,qlc) CNA QLE8142.
Version 3.11 12/11/09 * No change to isp2400, added support for Sun (SUNW,qlc) CNA QEM8152.
Version 3.10 12/02/09 * Change the name of the top level Fcode file from isp2xxx.fth to ispxxxx.fth. * Change makefile to include the creation of P3+ isp8200.xxxx.fc binaries. * Introduced bug for defered word fmw_ofs, never defined for ISP2400.
Version 3.09 10/26/09 * Change REV_LEVEL in rev_level.m4 from 3.09b1 to 3.09. Offical Release.
Version 3.09b1 10/22/09 * Fix Node-Name-Option bit preservation in restore-default-settings. ER68181.
Version 3.08 10/19/09 * Change REV_LEVEL in rev_level.m4 from 3.08b1 to 3.08. Offical Release. * Remove patch of PCI header image size byte at offset 0x2c from init version. * Fix flash-word! bug introduced in veersion 3.08b1. Affects ISP2400 only.
Version 3.08b1 10/14/09 * Fix default WWNN & WWPN preservation in restore-default-settings. ER67924. * Fix stack bug when link down. Introduced in v3.05 set-phandle word. ER67926. * Add standard properties. Use m4 utility to automaticly create date string. * Add file rev_level.m4 which has the revision level strings only. * Add FCoE & 4Gb IBM mezz cards QMI8142 QMC2462 QMI3472 QMI2472 to imezz? word. * Change messages "Login failed" to "Login Abort". "Error Subcode" to "Subcode". * Re-structure Flash/NVRAM access fnv-wd@/! words for the Netxen P3 integration. * Add 'make nx3031' to makefile for Netxen P3. #ifdef P3 used for delineation.
Version 3.08b1 09/25/09 * Add standard properties. Use m4 utility to automaticly create date string. * Add file rev_level.m4 which has the revision level strings only. * First version with some support for the Netxen P3 CNA.
Version 3.07 09/08/09 * Change version string from 3.07b2 to 3.07. Offical Release for IBM and SUN.
Version 3.07b2 09/04/09 * Fix read-cap16-cmd. Used when the LUN size is >2TB (i.e. #blocks > 32-bits). * Fix disk-test to work with large >2TB LUNs, where the LBA >32-bits.
Version 3.07b1 08/28/09 * Remove command retry when 8048 AEN is received. Caused DMA error found by IBM. This was an old workaround put in vers1.08b2, before IOCB timeouts were set.
Version 3.06 08/19/09 * Change version string from 3.06b6 to 3.06. Offical Release for IBM. * Fix qlgc-debug? option for IBM. Use find-method on IBMs and $find on SUNs.
Version 3.06b6 08/18/09 * Add option for qlgc-debug? in nvramrc. If the diag-switch? is true, then the debug? flag is set is set to the value of qlgc-debug?.
Version 3.06b5 08/18/09 * Add lba64 large disk capability (read-blocks64 write-blocks64) for SUN only. * Add support for QEM3572, SSDID = x172, for SUN only. * Add mbox1 & mbox2 display for 8048 interrupt if debug-asyc? flag (01) is on.
Version 3.06b4 08/13/09 * Fix bug in IBM fcp-luns method for the Controller LUN-0 check, lun0-check.
Version 3.06b3 08/12/09 * Check Inquiry Qualifier field of Controller LUN-0 in IBM fcp-luns method.
Version 3.06b2 08/10/09 * Add more IOCB debugging, Add Erase Response-Queue in mapmem. Had stale data.
Version 3.06b1 08/08/09 * Add more debugging for IOCBs, dma-map-in/out, & wait-for-interrupts.
Version 3.05 08/04/09 * Change version string from 3.05b2 to 3.05 Offical Release for IBM.
Version 3.05b2 08/03/09 * Fix set-fc-address issue found with IBM ioinfo. PortID was not getting set. * Re-structure devicepresent.fth. Add set-phandle to set obp-target & obp-portid
Version 3.05b1 07/31/09 * Fix multiple close issue found with IBM ioinfo utility.
Version 3.04 07/22/09 * Add "ibm,write-supported" property to disk child node, as per IBM's request.
Version 3.03 07/13/09 * No change, affected ISP2500 & ISP 8100 Fcode only.
Version 3.02 05/06/09 * No change, affected Schultz ISP8100 Fcode only.
Version 3.01 04/23/09 * No change, affected Schultz ISP8100 Fcode only.
Version 3.00 04/21/09 * Added more debugging information for AEN 8014.
Version 3.00b8 04/01/09 * No functional change, binary files differ. Only ISP2500 Fcode affected.
Version 3.00b7 03/31/09 * No change, Schultz ISP8100 Fcode only.
Version 3.00b6 03/04/09 * Change boot-wait-time to start timer(fw-ready-start) in isp-fw-ready method. * Change fix-rbios to check nvr-bad? before copying nvram to RAM.
Version 3.00b5 02/25/09 * Change link-down-timeout to boot-wait-time if bootwait-enable flag is true. * Add ILT support for SCHULTZ only. No effect on ISP2400 * Changed era-code (used in ldfcode) to use /code to determine #secs to erase. * Add set-cd-base+siz (used for ldfcode) to replace set-ld-base & set-/dlc.
Version 3.00b4 02/11/09 * No change. Changed flash-acc-data & offsets for ISP8100 only.
Version 3.00b3 01/21/09 * No change. Changed reg property for ISP2500 and ISP8100 only.
Version 3.00b2 01/08/09 * Added set-boot-wait-time commnad for all 4 & 8Gb HBAs/CNAs. Add NVRAM Fcode 2-byte parameter, boot-wait-time, at ofs x15a & enable-bit(x20) at ofs x158. This was requested by Fujitsu, for disks that take longer to come online.
Version 3.00b1 12/19/08 * Add Schultz ISP8100 support. No change to ISP2400 methods. * Added more SCSI sense debugging. * Reworked interrupt service routines with more debugging.
Version 2.04 12/03/08 * Change version string from 2.04b2 to 2.04 Offical Release.
Version 2.04b2 12/02/08 * Remove set-bootid, set-boot-wwn, & releated qla only words from IBM version. * Added IBM debugging to BOFM words and set debug?=C00 if diag-switch is true. * Added max-payload bridge fix for 4-port QMI2464 HBA. Used Gil's method. * Fix get-mail to handle Response-Queue interrupts (stat=13) & add debugging.
Version 2.04b1 07/23/08 * Preserve Flash area x40000-x80000 which has FW-Area, Flash Tables, NPIV data * Fix open to always return -1. Returning link-down fw-state fails on Serengetti
Version 2.03 06/30/08 * Change version string from 2.03b1 to 2.03 Offical Release.
Version 2.03b1 06/06/08 * Use complete NVRAM values for fwopt2 and fwopt3 in fw-init, initialize ICB.
Version 2.02 05/07/08 * Change version string from 2.02b3 to 2.02 (Offical Release). * Fix load-image to return error status so you can exit on failure. * Remove stop-fw from isp-probe method. It did nothing since FW is not loaded.
Version 2.02b3 04/17/08 * Change compatible property to append to existing property, if it exists. * Change all references in the Fcode of 'HBA' to 'Adapter' (for QLE8000 CNA).
Version 2.02b2 04/14/08 * Fix compatible prop for IBM. Return DDDD value back to DevID in strings: pciVVVV,DDDD.SSSS.ssss.RR & pciVVVV,DDDD.SSSS.ssss. DDDD was = SSDevID.
Version 2.02b1 03/27/08 * Fix blank lines in list-wwns for set-boot-wwn command in qla-mode. ER59591. * Change the d-mbox (dump-mailbox) word to use the .4z data format macro. * Add Access Menlo Data IOCB to allow displaying & changing Menlo configuration. * Add Menlo version number to the version command (Menlo only).
Version 2.01 03/27/08 * Change version string from 2.01b2 to 2.01 (Offical Release).
Version 2.01b2 03/05/08 * Change SubSystem Device ID from x0169 to x014B for Sun QEM3472 HBA. * Add sunid-bit = x10 to Fcode Parameter word (offset x158) in NVRAM.
Version 2.01b1 03/03/08 * Add support for Sun QEM3472 with SubSystem ID = 0x0169, node name SUNW,qlc. * Add QLE3000 Mercury HBA support. * Fix selftest mem-siz = x20000 (128KB) on IBM CFFe/CFFx mezz cards.
Version 2.00 02/15/08 * Change version string from 2.00b17 to 2.00 (Offical Release).
Version 2.00b17 02/07/08 * Modify ldfcode again to skip copy of WWN and checksum to BIOS-defaults area.
Version 2.00b16 02/05/08 * Modify ldfcode to copy all BIOS-defaults plus copy Model & DID to header. * Fix login-devices to return #ports, including non-target ports. This fixes Sun Bug ID 6645537, ER58525, where LUNs were not listed when Emulex present.
Version 2.00b15 01/29/08 * Fix target login problem with McData switch by adding GID_PT command. ER58769. * Modify ldfcode to poke BIOS default area of the MB-image with Model# & SSID.
Version 2.00b14 01/15/08 * Fix restore-default-setting to skip SSDID, OEM Specific Area, Feature Mask, and Model# copy to NVRAM. Also add revert-wwns on IBM. ER58465 & ER58509. * Replace load-stub-fw with stop-fw mbox command for PCIe 2400 HBAs. Firmware vers 4.00.25 or greater stop-fw command will do the same thing as stub FW. * Fix IBM BOFM bug where the default WWPN is lost if a new WWPN is written twice
Version 2.00b13 12/21/07 * Separate 2400/2500 Fcode into two binary output files (isp2400/isp2500). Remove isp2500? & use #ifdef ISP2500. Resulting in smaller 37KB image size. * Add use-cdb16? flag which is set in read-capacity if the target supports Large LBA. 16-byte CDBs are used only if use-cdb16? is set & LBA > 32-bits. ER58285. * Fix "chrp" string in papr-compliant? word (IBM BOFM support). * Change write-wwnn word to check for new-wwnn=0 (IBM BOFM support). * Add enab-nvr-acc to all 6 BOFM external words so they work on unopened dev.
Version 2.00b12 12/10/07 * Add init-chip? to sns-command & logout-devices for recovery from link-down. * Put ifp-abort back into wait-for-risc-int, which was taken out in vers 1.23.
Version 2.00b11 12/05/07 * Move clearing of flags link-up?, done-fw-init? port-updated? to reset-risc. This was for isp2500 set-boot-wwn failure because FW was stopped. ER58139.
Version 2.00b10 11/30/07 * 2500 change only. ER58002.
Version 2.00b9 11/28/07 * Fix find-image to check for last-image bit and exit loop if found. ER57989. * Fix init-fw problem. If NVRAM is blank, FW Option word-1 is not set in ICB.
Version 2.00b8 11/21/07 * Make BOFM support words external in IBM version. * Change my-wwnn@ to return WWNN based on current adapter WWPN. (IBM version) * Fix stop-risc bug. Clear done-fw-init? flag before calling mail. ER57926.
Version 2.00b7 11/12/07 * Remove 'ibm,' from the BOFM support words for IBM. Also update property. * Add check-managed-wwn which checks for PAPR-compliant & san_wwn string in root prop " ibm,managed-address-types" and then reverts WWNs if necessary.
Version 2.00b6 10/18/07 * Changed makefile to create separate isp2400 & isp2500 images(PCI header only). * Fix drate-val (default Auto Data-Rate value) w/o shift for selftest. * Fix n-port topology device-present problem. obp-portied was not getting set. * Add back architecture check (wrong-arch?) of PCI header DEVID during flashing. * Add rd-ram-wd and wr-ram-wd mailbox commands for debugging purposes. * Add BOFM support for the IBM version Fcode.
Version 2.00b5 09/24/07 * Combined 2400/2500 Fcode into a single binary output isp2x00 file. Use isp2500? word instead of #ifdef ISP2500. Resulting image size is now 38KB. * Changed Connection Mode & Data Rate debug messages during FW initialization.
Version 2.00b4 09/18/07 * Shrink code wherever possible. Remove unused words and shorten value names. * Fix find-fc method to add Func0 bc0_ofs. Otherwise it checksums Func1-fcode.
Version 2.00b3 09/07/07 * Add reset-risc to reopen-hardware method when init_link?=0, for INIT version.
Version 2.00b2 09/06/07 * Fix selftest to always use Auto-negoiate data-rate. ER56565. * Fix open for selftest to return OK status when link-down on a reopen. ER56566.
* Fix version number in PCI header. Should be 2.00.
Version 2.00b1 08/28/07 * Add 2500 support with major change in NVRAM and Flash utilities.
Version 1.27 08/21/07 * Change version string from 1.27b11 to 1.27 (offical release).
Version 1.27b11 07/31/07 * Move init-chip to reopen-hardware so FW loads in show-children if link-down. * Make chip-base, exprom, lun-index and port-update-occurred instance values. * Make link-up a Hard (not instance) so it stays set between instances. ER55858.
Version 1.27b10 07/11/07 * Fix find-dflts and dflt-wd@ to now handle 2-byte alignment in BIOS. ER55660.
Version 1.27b9 07/03/07 * Remove QLE2464 PCIe Dev control reg max-payload-siz set from 1.26b9. ER55588. * Added Data Rate command when debug-init is set, to display actual data rate.
Version 1.27b8 06/22/07 * Add setting WWPN bit-56. This bit is clear in the WWNN. This fixes a potential problem when OEM (DTI) uses oemutil to set the adapter's WWPN. Matches driver. * Add setting FW Option 1 word in ICB. Never reported as a problem, but... * Fix stack bug in login-device when comp-status is invalid(eg. 99). ER55423.
Version 1.27b7 06/11/07 * Fix stack bug created in 1.27b6 on Bad IOCB Entry Status. * Add Execute command error debug level x40 and rework debug levels.
Version 1.27b6 06/05/07 * Remove fc-mode, set-fc-mode (qla-mode) words from IBM version. * Change IOCB fail messages to show only when the debug? 08 bit is set. ER55150.
Version 1.27b5 05/24/07 * Fix restore-default-setting to skip the Adapter WWPN copy into NVRAM. ER55009.
Version 1.27b4 05/14/07 * Add re-login when IOCB status =x29|x28, which will init-chip & login-device. This change was made to handle cable-pulls during boot. ER54837. * Change debug messages: Loop Up/Down to Link Up/Down & add test-unit-ready. * Change makefile to create 256k byte Fcode-only images to be used with SCLI.
Version 1.27b3 05/03/07 * Add back restore-default-settings but restore entire NVRAM from BIOS defaults. * Fix ibm-encode-unit to drop LUN if =0 & remove leading zeros, like 2312 Fcode.
Version 1.27b2 04/03/07 (Sent to Lyle) * First pass at adding NVRAM max-frame-size in FW ICB. Based on vers 1.26b10.
Version 1.27b1 03/22/07 (beta version given to IBM) * Add 16-byte SCSI CDB read/write commands for LBA >2TB. Based on vers 1.26b10.
Version 1.26 05/17/07 * Change version string from 1.26b21 to 1.26 (offical release).
Version 1.26b21 04/26/07 * Remove error messages for 'TUR failed' & SCSI 'Retries exhausted'. ER54516.
Version 1.26b20 04/25/07 * Remove restore-default-settings for 1.26 rel. Put a complete restore in later.
Version 1.26b19 04/25/07 * Change version-prop "Host Adapter Driver" to "Host Adapter FCode". ER54455.
Version 1.26b18 04/24/07 * Fix list-wwns to not call get-portname-db if invalid topology. ER54434.
Version 1.26b17 04/19/07 * Add NVRAM parameters restore-default-settings, with confirm question. ER54346. * Stop using the bios-compatibility-mode bit in NVRAM and remove set-mode command since it is no longer used in the 4Gb FCode (needed for 2Gb only). * Move all of the NVRAM access methods into a separate file, nvram.fth.
Version 1.26b16 04/18/07 * Add show max-frame-size (show-maxfs) to show-settings. * Fix bug in VPD data fetch (vpd@) word. Need to poll ready bit. ER54345.
Version 1.26b15 04/13/07 * Fix max-frame-size typo in menu, should be 1024, was 1048. * Fix version number in PCI header, was 1b(1.27), should be 1a(1.26).
Version 1.26b14 04/13/07 * Change max-frame-size to use a 3 choice menu, 1-512, 2-1024, 3-2048. ER54229.
Version 1.26b13 04/12/07 * Add Fcode usage of NVRAM parameter, max-frame-size in FW initialize ICB. * Add word, set-max-frame-size, for changing this NVRAM parameter. ER53990.
Version 1.26b12 04/10/07 * Fix inquiry? to check for no-data xfer. Problem seen when LUN#>255. ER54103. * Add 16-byte SCSI CDB read/write (x88/x8a) commands for LBA >2TB. IBM request. This change does not effect the old 6-byte & 10-byte SCSI CDB reads/writes.
Version 1.26b11 04/04/07 * Change word show-boot-wwn from being 'external' to 'header', so it is not visible with fcode-debug? flag =false. Requires change to readme.txt. ER53873.
Version 1.26b10 03/02/07 * Fix stack bug, introduced in 1.26b8, in display-luns when report-luns fails. * Remove comp-status=6 error message on commnad timeout in execute-command. * Go back to using tar.Z instead of zip format for release files.
Version 1.26b9 03/01/07 * Set timeout field in IOCB prepare-command. Timeouts were disabled! ER50089. * Change qla-mode use-bid? flag back=0. It does not need to match the bootID. * Add QLE2464 max-payload-size in Device Config Reg, offset x54.
Version 1.26b8 02/07/07 * Remove debug? flag set if diag-switch? environment variable is true. * Add Work-around delay in show-children to give FW time before issuing IOCBs.
Version 1.26b7 02/06/07 * Add login-device in show-loop-devices to fix bug with StorEdge 3511 minnow. * Fix display-inquiry stack bug when inquiry command fails. * Fix sense buffer check for illegal request in report-luns method. * Remove LUN0 inquiry command execution in display-luns, when report-luns fails. * Removed "Warning: NVRAM boot-id should be=" when in qla-mode, & loop topology.
Version 1.26b6 02/01/07 * Reduce /lunbuf to x10000 for MACs. This reduces max-luns from 16k to 8k. * Change to use NVRAM boot-id when in qla-mode for fabric topology, use-bid?=-1.
Version 1.26b5 01/25/07 * Fix bug in fp.fth. logout-device was not present. Needed since v1.25b6. * Start using port-down-rc retry-count in spin-up and rw-blocks scsi commands. * Disallow 0 entry for set-link-timeout set-port-down-count & set-login-count. ER51830 and ER51857.
Version 1.26b4 01/17/07 * Change data-rate menu to use 'Gb/sec' instead of 'Gigabit'. ER51678.
Version 1.26b3 01/12/07 * Add LUN list and lun-present? check to qla-mode set-boot-wwn method. ER51224.
Version 1.26b2 01/05/07 * Add Atmel 26DF081A Flash support. * Fix ldfcode to set DevID field in all PCI image headers.
Version 1.26b1 12/21/06 * Add Fcode usage of NVRAM parameters: login-retry-count, link-down-timeout. Currently port-down-retry-count is still not used by the Fcode. * Add words: set-login-count, set-link-timeout. & set-port-down-count for changing these NVRAM parameters. * Add hidden words: show-logincnt, show-linkto. & show-portdcnt for displaying these NVRAM parameters. * Add these new words to the show-settings list and the show-commands list. * Change display of boot-lun and boot-id to be both hex and (decimal).
Version 1.25 12/11/06 * Change version string for the 1.25 offical release.
Version 1.25b7 12/08/06 * Do not use NVRAM boot-id in qla-mode unless use-bid? flag is set, normally=0.
Version 1.25b6 12/08/06 * Fix qla-mode boot-id bug in fabric-wwn-to-handle. Was not using NVRAM boot-id. * Set limits on qla-mode NVRAM boot-id <= 7ff and on boot-lun <= ff. ER50909. * Add logout-device (of target boot-device) in close of scsidisk child.
Version 1.25b5 12/05/06 * Fix stack bug in login-device. This bug was induced in 1.25b2, LS_RJT fix. * Remove GID_PN fail mesage from fabric-wwn-to-handle & display if debug? on. * Change SN# fetch in show-settings to get it from the VPD data, not the WWN. * Add debugging to fcp-targets and fcp-luns. * In qlc-mode, disallow set-boot-wwn, set-boot-id & don't list in show-commands.
Version 1.25b4 12/02/06 * Fix GID_PN (0x121) & GPN_ID (0x112) SNS commnads to handle a null buffer.
Version 1.25b3 12/01/06 * Fix link-down topology=f case bug in device-present?. * Change ext-loopback-test to separate diag-init-chip & lb-ext (external).
Version 1.25b2 11/29/06 Fix login-devices bug on LS_RJT (found by Lyle), logout to preserve phandles.
Version 1.25b1 11/22/06 * Add show-commands. ER50338. * Add decimal display of target & Lun # in show-children.
Version 1.24 11/13/06 * Change version 1.24b3 string to the official release 1.24. * Change max-luns=16K for qlc-mode. Limit LUN field range to 8-bits in qla-mode.
Version 1.24b3 11/13/06 * Fix report-luns buffer & commnad, add 8 bytes for # of LUNs field. ER50220.
Version 1.24b2 11/09/06 * Change max-luns=256 (max # of LUNs per target) to match the driver. Was 1024. * Change execute-command to check status returned by login-device, & fail if bad * Change selftest to use init-chip which waits for fw-ready, instead of a delay.
Version 1.24b1 11/03/06 * Execute external-LB test from selftest only if in FL-port or NL-port topology. * Create command ext-loopback-test. Allows manual execution of External Loopback * Change ldfcode in flash-pgm to allow flashing of 1MB multi-boot images.
Version 1.23 10/18/06 * Change version 1.23b1 string to the official release 1.23.
Version 1.23b1 10/11/06 * Add ~2 sec. delay before executing show-nport-devices in show-children. * Added Level debugging. * Move tools directory up one level, so we don't keep a copy in every version.
Version 1.22 10/02/06 * Change version 1.22b5 string to the official release 1.22.
Version 1.22b5 09/29/06 * Fix isp2400-probe bug on PCIe HBAs. HBA regs were not mapped when load-stub-fw was executed. Also, moved isp2400-probe execution to the end of ifp.fth.
Version 1.22b4 09/19/06 1 Fixed list-wwns word so set-boot-wwn will work for N-port topology . 2 Fix selftest again so connection-mode always = Auto, during the test.
Version 1.22b3 09/15/06 1 Fixed get-id-list word to work for N-port topology on the ISP2400. 1 Increase max-fab-devs to 2048. 3 Change initial value of topology to x0f. (invalid) 4 Add show-settings word to list the HBA's settings. Make version word external. 5 Fix selftest to work independent of NVRAM connection-mode setting.
Version 1.22b2 09/11/06 1 Fixed processing of get-id-for-fc4type GID_FT buffer to check for null buffer. 2 Changed names of prom output files to isp2400.sun.fc and isp2400.ibm.fc.
Version 1.22b1 08/21/06 1 Add FW initialization stub loader at probe time & in close method. This is done only on PCIe HBAs (i.e. Dev-ID not equal to 2422). 2 The Makefile was changed: The tokenizer directory was changed to tools and a local copy of cpp and makearray are kept in tools. Tokenize and fakeboot are no longer used, and .out files are no longer created, only raw .fc files with no header. ldfcode will not work on older fcode, update with init version
Version 1.21 08/01/06 * Change version to non-beta after testing.
Version 1.21b1 07/18/06 * Change info-count from an instance value to simple value. This will limit the version banner to be displayed only once during the boot process.
Version 1.20 06/22/06 * Prohibit connection-mode change if DevID=54xx. Print: Model # will Auto-negotiate.
Version 1.19 06/14/06 * Release. Add support for QLE210, SSDID=x132(Sun) & SSDID=x13E(Qlgc).
Version 1.19b2 06/13/06 1 Prohibit data-rate change if DevID=54xx. Print: Model # will Auto-negotiate. 2 Add get-model-prop word. For printing model # if data-rate change is rejected.
Version 1.19b1 06/09/06 1 The memory size tested in mem-test will now be cut in half on all HBAs with Device ID = 54xx, such as the QLE220. The word reduce-func? was created. 2 Word for reading config space regs, vid@, did@, ssvid@, & ssdid@ were created.
Version 1.18 05/24/06 * Make v1.18b2 release v1.18
Version 1.18b2 05/23/06 1 Fix problem found on Sun T2000 PCIe. pci-compat-str did not handle dev-id=5432 2 Remove class-code-string2 word. It was producing a bad string pciclass,0400.
Version 1.18b1 05/19/06 1 Add support for several HBAs including the Sun QLE220 HBA with SSDID=x14E. 2 Add restriction of qla-mode change on all SUNW type HBAs. 3 Remove extra version string display during selftest. 4 Fix read-block-ext to only use read-capacity command, not try mode-sense first 5 Add display of non-zero FCP/SCSI status during debug mode. 6 Fix initialization of port-update-occurred flag during wait for isp-fw-ready?
Version 1.17 03/31/06 1 Put in Asif's fix for retry?(scsi.fth) to check sense length before IOCB copy. 2 Make my-wwn value external for IBM users. 3 Put in Asif's fix for ibm-decode-unit, to correctly parse out WWN and LUN# in cases where the LUN# may or may not be specified in the path. 4 Fix IBM set-address to correctly set obp-lun-lo and opb-lun-hi.
Version 1.16b11 03/28/06 * Make qla-mode? value in qlc parent & qla-mode? word in fp child node externel. Before fix, would not work if fcode-debug? = false.
Version 1.16b10 03/20/06 1 Fix fcp-luns for FL-PORT. Add 2dup so WWN is on the stack for f-port-fcp-luns 2 Make qla-mode? not instance value so show-devs will work. 3 Change fnv-access-to back (from x10 to x800) 4 Add set-timeout word back (needed for IBM). It was removed in b1.16b1
Version 1.16b9 03/08/06 * Change Firmware load-image to run faster.(very slow on serengeti) change read-code-segment to rd-code-seg. Change dly-val from 50 to 10. Move FLASH-ERR ifpcsr! to get-addr-len. Change fnv-access-to from x1000 to x10
Version 1.16b8 03/07/06 * Serengeti fix child creation. Put all if statements inside colin definitions. * Move scsicom.fth words into scsidisk.fth
Version 1.16b7 03/03/06 * Mod child creation. Use qla-mode? flag, not the property. Remove prop qla-mode * Change Loop init error message to print only if in debug mode.
Version 1.16b6 02/27/06 * Fix encode-unit to encode the lun target integer pair. Used in qla-mode.
Version 1.16b5 02/23/06 * Swap order of boot-wwn-hi & boot-wwn-lo in NVRAM (hi is now first) Always prompt for boot-target-id in set-boot-wwn.
Version 1.16b4 02/09/06 * Remove periods in display-wwn & display-inquiry,LUN. Now show-children looks the same as it use to. * Add 2-bit fcode-host field to fcode-parameter word (wd offset x56) in NVRAM. Value can be 00-SPARC, 01-IBM, or 10-MAC. This will effect the version string. The 01-IBM value should not be used. The IBM version is still a separte binary
Version 1.16b3 02/03/06 * Change Initiator test in login-device also. Test TARG-BIT of Service params. * Change show-login-devices & show-fabric-devices to skip display-luns if display-port-db fails. Check target bit done in get-port-db. Now FL-port works
Version 1.16b2 01/31/06 * Remove all #ifdef MAC instrustions. Make SUN version the SPARC/MAC version * Fix problem found @SUN w/6920, Change Initiator test in get-portname-db.
Version 1.16b1 01/30/06 * Add support for Apple MAC Fcode, using #ifdefs. Make it 32-bit compatable. * Add disk-test (read-write-read-compare) selected target with sel-dev & sel-lun Moved read-block-ext, timed-spin, r/w-blocks from sd node to parent qlc node.
Version 1.15 Beta_2 12/15/05 * Modify beacon word to flash top and bottom LEDs only!
Version 1.15 Beta_1 12/09/05 * Change node name to QLGC,qla for qla-mode on Sun platforms. * Added boot ID NVRAM modification to the set-boot-wwn method.
Version 1.14 11/04/05 * Added support for qla-mode on Sun platforms. Added NVRAM modification words for Fcode parameter byte (fcode-mode) and Boot Port Name/Boot LUN. Including: set-fc-mode, set-boot-wwn, fc-mode@, boot-wwn@, boot-wwn!, and boot-lun@. * Add creation of qla-mode property if the fcode-mode bit is set. * Modify set-address and device-present? to handle #address-cells =2 in qla-mode * Modify set-address & prepare-command to correctly handle 64-bit LUNs. * Cleaned up code. Got rid of unneeded calls to get-id. Made all constants CAPs. * Added login-devices word to login to all fabric devices and return #ports. * Added display-port-db word used by list-wwns and show-children (fabric & loop) * Modified show-fabric-devices to call login-devices and the call get-port-db
Version 1.13 10/28/05 * Asif fixed retry? in scsi.fth to check sense length before copy to IOCB.
Version 1.12 10/10/05 * Fixed issue with multiple initiators on local loop
Version 1.11 (1.10.13) 10/3/05 * Fixed Sun defect CR 6308066 (ER43414) Boot failed from Pyramid targets * Fixed Sun defect CR 6328443 Failed to boot from SE6920/6130 target * Fixed Sun defect CR 6324644 (ER43580) SE6130 LUN information is not shown correctly
Version 1.10.11 09/28/05 * Fixed ER42627: selftest does not perfrom risc-test. * Populate fcp-luns data struct with LUN values in little-endian byte order.
Version 1.10.09 09/26/05 * Fixed ER42883: Getting illegal instruction following a probe-scsi-all. * Fixed ER43041: device name prop creation SUNW or QLGC or fibre-channel. * Fixed ER42627: risc-test causes unknow error. Incuded init-chip before test. * Fixed ER43571: Version property now includes the model string.
Version 1.10 09/13/05 * Included special steps in reset-risc.
Version 1.09 09/12/05 * Released 1.08.06 for test.
Version 1.08.06 09/09/05 * Fixed Sun defect 6309765 - (ER43064 same issue) Adapter information not printed the second time probe-scsi-all is typed. * Fixed Sun defect 6308468 - boot message is not generic. * Fixed Sun defect 6308071 - probe-scsi-all prints incorrect message if no cable connects to a port. * Fixed ER43133 - Displays Error: Unable to get Adapter ID when executing probe-scsi-all. * Fixed ER43135 - The header info indicate ISP2422 instead of ISP2432. * Fixed ER42880 - Mailbox or IOCB interrupt timeout occurred. * Fixed ER42883 - get-portname-db failed. * fcp-targets and show-children would cause login into initiators, and then subsequent scsi cmds to logged-in initiators would fail/timeout. Checked for device type (target/initiator) in PRLI parameters field in response iocb in words get-port-db and login-device, (performed a logout in the case of login-device word (which is fabric topology case)) and returned failure to ensure that no scsi cmds would be issued to initiator devices. * Device name property string dependent on ISP24xx subsystem-device-id for SPARC platform. * Model property dependent on ISP24xx device-id. * Compatible property string prefixed with "pci" (ISP2422) or "pciex" (ISP2432).
Version 1.08.05 07/29/05 * Fix bug in version-prop method for the IBM version (needed a swap).
Version 1.08.04 07/27/05 * Change version-prop method to concatinate long-string & short-verion string Now the date and version number are contained in one single place! * Make the beacon word external. * Add get-id to init-chip to set the topology. Take get-id out of open. * Reorganize the order of methods in ifp.fth * Fix get-sense (retry?) to use the sense data in completion IOCB, if available. * Modify report-luns to accept an "Illegal Request" unit check response. * Move all SCSI related commnads to hacom.fth and rename it "scsi.fth". *
Version 1.08.03 07/12/05 * Change version property string, Add date to the end. * Put LED test "beacon" word back in. It was removed in Version 1.08b6. * Fix login-device call in f-port-fcp-luns method (fcp-luns.fth). * Comment-out call to logout-device in f-port-fcp-luns. (need to stay logged in) * Add release-history.txt file to release package. * Include tokenizer directory in release package, change makefile to use it.
Version 1.08.02 07/05/05 * Fix show-children hang bug when no devices attached, re-wrote show-fabric-devices method. * Create common get-id method to get adapter's ID & portid, new value my-portid. * Add 8048 Async error retry return code (x99) to the do-cur-iocb method. * Create common method, process-async, called by do-cur-iocb and get-mail. * Implement logout-device and logout-devices. (Was a no-op) * Change login-device to return completion-status, clean-up process-login-err. * Changed mailbox command names from isp- to mbc-. * Shortened some messages and made them common. Shortened some value names.
Version 1.08.01 06/28/05 * Change the version string only, for release to Sun.
Version 1.08b7 06/28/05 * Add Serial-Transmit-Parameter mailbox command, set-isp-stp, to init-image. * Add set-slc method to set the Serial-Link-Control parameters in NVRAM. This allows the operator to change the output swing and output pre-emphasis for 1Gb, 2Gb & 4Gb. * Change FCode checksum to use checksum in FCode Header, we will not use our own checksum byte at offset 0xfffc in Flash. The check-fcode method, which is part of selftest, now works on a combined BIOS/FCode/EFI Flash Image. * Add check for "ISP " signature in NVRAM method, nvr-bad?, which is called before setting connection-mode, data-rate and bios-compatibility-mode. If the NVRAM is bad, default values will be used instead. * Fix NVRAM checksum to be the same as Flasutil. (sum words not bytes to = zero) * Added show-bootid & show-model methods to show the corresponding NVRAM values. * Clean up load-image method. * Got rid of set-adapter-loopid. No reference in NVRAM docs, and never used. * Got rid of starting-id stuff. * Changed makefile to not use fiximage or fill128 utility. Use dd cmd instead!
Version 1.08b6 06/20/05 * Shorten version property for luxadm problem. * Add selftest, including: check-nvram, check-fcode, mem-test, risc-test (isp online selftest) and diag-lb (internal, 10-bit, 1-bit, & external loopback) * Fix image size to pad image to 512 byte boundary, and update PCI header value. * Added map-dma to combined dma-alloc and dma-map-in methods. And add unmap-dma to combined dma-free and dma-map-out methods. * Added init-chip method to initialize & re-load FW, equivalent to re-selecting. * Add fiximage.c utility to calculated FCode checksum for Flash images.
Version 1.08b5 05/26/05 * Fix set-fc-address for IBM. Now "Select Boot/Install device" works! * Fix no-data command during IOCB build in prepare-command method. * Added sav-fc method to save a copy of the FCode to RAM at location x4030. * Moved FCode programming methods to a separate file, flash-pgm.fth.
Version 1.08b4 05/23/05 * Fix report-luns method problem when 0 LUNs is returned. * Add SST25LF080A flash support. Add getpid method to check PROM ID.
Version 1.08b3 05/20/05 (First delivery to Qlogic) * Fix BIOS compatible NVRAM parameter bit bug in set-mode method. * The show-children method is now working for loop (nl) and fabric topology, but n-port (point-to-point) is still not supported!
Version 1.08b2 05/19/05 * Change model = QLGC24xx, name = SUNW,qlc. * Add Asif's multiple IOCB interrupt fix. Using rsq-iocb-valid? method.
Version 1.08b1 05/18/05 * Got manual booting on IBM working! Many changes to fcp-luns & fcp-targets. * Fixed SUN/IBM version banner bug. * Modified verbiage in NVRAM mod? word.
Version 1.08x 05/16/05 * Fixed Endian problem w/phandle, now booting in loop topology on the Sun. * Added fcp-targets and fcp-luns methods for IBM platform compatibility.
Version 1.07 05/13/05 * Initial release with booting fabric device working on Sun. * Add ldfcode utility to program FCode at the OK prompt. * Fixed all of the NVRAM parameter set methods. * Combined various pieces of FCode from 2312 & 24xx code bases.
qlgc_fw_fc_4g-mb1_90-3-sysx_windows_32-64_chg
Firmware Version 2.01a3
New Features
* Enhanced timeout notifications for processing abort failures.
Problems Fixed:
1. All multi-abort I/Os are returned on the same ring from which the ABORT_MXRI command was received.
2. Changed the TRCV response in the abort state to CMD RJT to enable the TRSP to be processed.
3. Corrected an issue with blocked TSEND operations.
4. Corrected a buffer leak issue with RRQ exchanges.
5. Corrected an issue where the TRCV IOCB was de-queued improperly causing a XFR_RDY flood.
6. Corrected an issue where the OXID field was not loaded in the XRI_ABORTED IOCB.
7. Corrected an issue in recognizing whether an EEPROM is present.
Dependencies: - The corresponding FC Storport device driver and OneCommand Manager Core-kit (management) will need to be installed for this package to function properly.
1. 118933 Fixed an issues booting when more than 8 ports are present in the system and fixed an adapter display issue when more than 8 ports are present in the systems 2. 118933 Fixed issues installing and booting O/Ss on ports greater than 8. 3. 121923 Fixed issues installing and booting O/Ss on ports greater than 8. 4. 122286 Fixed some boot time screen display issues.
(2) OpenBoot version 3.10a3
This version of OpenBoot supports FC-AL, Private loop, Public loop, and Fabric Point to Point. Also, it supports multi-initiators and multi-LUNs (0 through 4055)
Problems fixed, features added or other updates:
1. Unrelated to IBM
(3) EFIBoot version 4.12a12
The current EFI (Extensible Firmware Interface) Boot provides 64-bit System boot capability through the use of the EFI Shell. This EFIBoot supports EFI Specification 1.10 and EFI Source Code version 1.10.14.61.
Problems fixed, features added or other updates:
1. Only certain OEM HBAs will locate PlatformToDriverConfigurationProtocolGuid. Others just skip and continue processing 2. UEFI2.3 Hii Configuration Utility changes 3. HII Browser Save option does not work
1. CR105423 - On a port connected to a 3PAR "MBOD" cage, the test runs IO to the disk drives and issues a "controlport offline" command to offline the port while IO is running.
2. CR111194 - While doing target side cable pull testing with Block Guard (T10) Enabled we observed that adapter is not sending RSCN to AIX.
3. CR111625 - *IBM defect 775960 - HBQ ring index pointers?
5. CR111928 - 3PAR - LR with port and subsequent FLOGI failing.
Dependencies: - The corresponding FC Storport device driver and OneCommand Manager Core-kit (management) will need to be installed for this package to function properly.
Enhancements: Multiple adapters connected to same PCIe bridge port can request more I/O Space that system can allocate. Updated firmware kernel code so Saturn based HBA and mezz cards do not use or advertize need for system I/O Space.
Known Issues: None
Firmware Base 2.82a4 plus new zephyr kernel version bz1.21x1 and new Helios kernel version bs1.20x8
- ST33000650SS to BC3A ST1000NM0001, ST2000NM0001 to BC44 Additions and corrections to VPD information used by manufacturing
SAS 2.5"
- ST9300605SS, ST9600205SS, ST9900805SS to B559 ST9146853SS, ST9300653SS to B637 ST9500620SS, ST91000640SS to BD29 ST9300505SS to E553 SST9146753SS to E633 HUC106030CSS60, HUC106060CSS60 to D390 Additions and corrections to VPD information used by manufacturing
- MK1401GRRB, MK3001GRRB to SC23 Fixes a pottential data corruption bug if there is an unexpected power loss.
SATA 3.5"
- ST3250310NS, ST3500320NS, ST3750330NS, ST31000340NS to BB15 ST3500514NS, ST31000524NS, ST32000644NS to BB29 ST33000650NS to BB36 ST1000NM0011, ST2000NM0011, ST500NM0011 to BB46
SATA SSD
- SG9XCS1B50GMIBM, SG9XCS1F200GEIBM to SA03SB6C SG9XCS2D200GEIBM to SA03SE6C Fix for potential hang during an unexpected power cycle
MTFDDAK128MAR-1JAAB, MTFDDAK256MAR-1JAAB to MA44 Initial Release
This package includes new updates to drives with product ID strings of:
SAS 3.5"
- VPCA300900EST1, VPCA600900EST1 to A3C0 Correction to VPD information used by manufacturing
- ST31000424SS, ST32000444SS to BC2B Fixes to improve robustness from certain read errors due to encroachment
- ST33000650SS to BC37 Fixes to improve overall robustness.
- ST1000NM0001, ST2000NM0001 to BC42 Inital Release
SAS 2.5" (SFF)
- ST9300605SS, ST9600205SS, ST9900805SS to B556 - ST9146853SS, ST9300653SS to B635 Fixes to improve overall robustness.
ST9300505SS to E552 ST9146753SS to E632 Initial Release
- ST9500620SS, ST91000640SS to BD26 Improve general robustness and added support for DPICZ
- HUC106030CSS60, HUC106060CSS60 to D340 Improve general robustness
- MBF2300RC, MBF2600RC to SB28 Improves performance in certain benchmarks
SATA 3.5"
- ST33000650NS to BB34 Fixes to improve overall robustness.
- ST1000NM0011, ST2000NM0011, ST500NM0011 to BB45 Initial Release
- ST3500514NS, ST31000524NS, ST32000644NS to BB29 Fixes for intermittent drive hangs
- ST3250310NS, ST3500320NS, ST3750330NS, ST31000340NS to BB15 Added enhancement for improved robustness
SATA 2.5"
- ST9250610NS, ST9500620NS, ST91000640NS to BE24 Initial Release
- ST9160511NS, ST9500530NS to BE19 Fixes for overall robustness.
SATA 2.5" SSD
- STEC MACH8 IOPS to 2765 STEC M8PSB2 T4 to SM05 Fixes potential drive lock up during cold or warm boots Fixes issues with RHEL 6.x installation
- SG9XCS2D200GEIBM to SA03SE6C Fixes default drive VPD information for manufacturing, the default LED behavior on certain systems and fixes issues with client install thru VMWare 5.x
SATA 1.8" SSD
- STEC M8PSB1 to 0409 STEC M8PSB1 T4 to SM16 Fixes potential drive lock up during cold or warm boots Fixes issues with RHEL 6.x installation
- SG9XCS1B50GMIBM to SA03SB6C SASG9XCS1F200GEIBM to SA03SB6C Fixes potential drive lock up during cold or warm boots and the default LED behavior on certain systems and fixes issues with client install thru VMWare 5.x
This package includes new updates to drives with product ID strings of:
SAS 3.5"
- ST31000424SS, ST32000444SS to BC28 Added enhancement for improved RV robustness
- MBE2073RC, MBE2147RC to SC17 - MBA3073RC, MBA3147RC, MBA3300RC to SA0A Added VPD changes for manufacturing
SAS 2.5" (SFF)
- ST9300603SS, ST9146803SS to B53C ST9600204SS to B548 SST973452SS, ST9146852SS to B62C CBRCA146C3ETS0, CBRCA300C3ETS0 to C610 Added fixes for overall drive robustness
- MBD2147RC, MBD2300RC to SB1A Added VPD changes for manufacturing Addresses issues seen with DSA HDD Diagnostic test.
- MBF2300RC, MBF2600RC to SB25 Addresses issues seen with DSA HDD Diagnostic test.
- ST9500620SS, ST91000640SS to BD22 HUC106030CSS60, HUC106060CSS60 to D2F8 Inital Release
SATA 3.5"
- WD2502ABYS-23B7A0 , WD1602ABYS-23B7A0 to 02.03B07 Addresses firmware issues that may cause a drive to be marked defunct prematurely under certain application workloads.
- ST3250310NS, ST3500320NS, ST3750330NS, ST31000340NS to BB14 ST3500514NS, ST31000524NS, ST32000644NS to BB28 Added enhancement for improved robustness
- WD5003ABYX-23 to WC31 Initial Release
SATA 2.5"
- WD3000BLFS-23YBU0 to 04.04V10 (Critical) Addresses firmware issues that may cause a drive to be marked defunct prematurely under certain application workloads.
- ST9250610NS, ST9500620NS, ST91000640NS to BE21 Initial Release
SATA 2.5" SSD
- STEC MAC8 IOPS to 2732 STEC M8PSB2 T4 to SM04 Addresses an issue installing RHEL 6.0 onto this drive.
SATA 1.8" SSD
- SG9XCS1B50GMIBM, SG9XCS1F200GEIBM to SA03SB63 Addresses rare issue where the drive may not being seen on power up.
- STEC M8PSB1 to 0408 STEC M8PSB1 T4 to SM15 Addresses an issue installing RHEL 6.0 onto this drive.
- ST373455SS, ST3146855SS, ST3300655SS to BA2D - ST373355SS, ST3146755SS, ST3300555SS to BA38 - ST3146356SS, ST3300656SS, ST3450856SS to BA4C - ST3300657SS, ST3450757SS, ST3600057SS to BA58 - ST3750630SS, ST31000640SS to BC1G - ST31000424SS, ST32000444SS to BC26 (All Above Critical) These codes addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. For further information, please refer to retain tip H197382.
- MBA3073RC, MBA3147RC, MBA3300RC to SA08 This code corrects a firmware bug that may cause the drive to not come ready on a cold boot.
SAS 2.5" (SFF)
- ST973402SS, ST9146802SS to B52B - ST936751SS, ST973451SS to B617 - ST9146803SS, ST9300603SS toB53B - ST9600204SS to B546 - ST973452SS, ST9146852SS to B629 - ST9300503SS to E536 - ST9146752SS to E625 - ST9500430SS to BD14 (All Above Critical) These codes addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. For further information, please refer to retain tip H197382.
SATA 3.5"
- ST3500514NS, ST31000524NS, ST32000644NS to BB26
- WD2003FYYS-23W0B0 to WA32 - WDC WD1003FBYX-23Y7B0 to WB31 Initial release
SATA 2.5" SSD
- STEC MACH8 IOPS to 2582 (Critical) Corrects firmware bug that may cause data corruption. For further information, please refer to retain tip H197650.
SATA 1.8" SSD
- STEC M8PSB1 to 0405 (Critical) Corrects firmware bug that may cause data corruption. For further information, please refer to retain tip H197650.
This package includes new updates to drives with product ID strings of:
SAS 3.5"
- VPCA300900EST1, VPCA450900EST, VPCA600900EST1 to A3B8 Initial Release
- VPBPA300C3EST1 to A529 Initial Release
- ST3300657SS, ST3450757SS, ST3600057SS to BA56 (Critical) Performance improvements under certain workloads. Corrects a firmware bug that may cause the drive to not come ready on a warm or cold reboot.
- ST31000424SS, ST32000444SS to BC21 Initial Release
SAS 2.5" (SFF)
- ST9300603SS, ST9146803SS to B53A (Critical) Performance improvements under certain workloads. Corrects a firmware bug that may cause the drive to not come ready on a warm or cold reboot.
- ST9600204SS to B544 (Critical) Corrects a firmware bug that may cause the drive to not come ready on a warm or cold reboot.
- ST973452SS, ST9146852SS to B626 Performance improvements under certain workloads.
- ST9500430SS to BD13 Performance improvements under certain workloads
- ST9300503SS to E534 and ST9146752SS to E623 Performance improvements under certain workloads.
- MBD2147RC, MBD2300RC to SB19 (Critical) MBE2073RC, MBE2147RC to SC16 (Critical) Corrects a firmware bug that erroneously reported medium errors which may cause the drive to report PFA alerts and in some cases be marked offline
SATA 3.5"
- WDC WD2502ABYS-23B7A0, WD2502ABYS-23B7A0, WD802ABYS-23B7A0, WD1602ABYS-23B7A0 to 02.03B05 (Critical) Corrects a firmware bug that may cause the drive to not come ready on a warm or cold reboot.
- ST3500514NS, ST31000524NS, ST32000544NS to BB26 (Critical) This code addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. For further information, please refer to retain tip H197382.
- ST3250310NS, ST3500320NS, ST3750330NS, ST31000340NS to BB13 (Critical) This code addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. For further information, please refer to retain tip H197382.
- HUA722020ALA330 to JKAOA3GA HUA722050CLA330 to JP2OA3GB HUA722010CLA330 to JP4OA3GB Initial Release
SATA 2.5"
- WD3000BLFS-23YBU0 to 04.04V09 (Critical) This code corrects an additional issue where the drive may be marked defunct.
- ST9160511NS, ST9500530NS to BE18 (Critical) This code addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. For further information, please refer to retain tip H197382. Also improves performance under certain workloads.
SATA 2.5" SSD
- STEC MACH8 IOPS to 2366 (critical) Corrects firmware bug that may cause degraded performance and in some cases the drive may not come ready after a warm or old boot.
SATA 1.8" SSD
- STEC M8PSB1 to 0404 Turns the default for write cache off Initial Release
IBM SAS Hard Disk Drive Update Program Version 1.06 (Critical)
Added support for the following controllers:
- IBM ServeRAID BR10il SAS controller v2 (49Y4731) - IBM ServeRAID M1015 SAS controller (46M0831) - IBM ServeRAID M5015 SAS controller (46M0829) - IBM ServeRAID M5014 SAS controller (46M0916)
This package includes new updates to drives with product ID strings of:
SAS 3.5"
- ST373455SS, ST3146855SS, ST3300655SS to BA2A ST373355SS, ST3146755SS, ST3300555SS to BA36 (Critical) These codes addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. When a write is issued while the drive write cache is enabled and a read-verify is performed immediately afterwards, undetected data corruption can occur. For further information, please refer to retain tip H194632.
- ST3750630SS, ST31000640SS to BC1E ST3146356SS, ST3300656SS, ST3450856SS to BA4A This code address an issue where the drive may report an erroneous hardware error to the controller.
- MBA3073RC, MBA3147RC, MBA3300RC to SA07 This code improves sequential write performance under certain workloads when write cache is turned on.
- ST3300657SS, ST3450757SS, ST3600057SS to BA52 NOTE: This is the first code release to be included in the hard drive update package.
SAS 2.5" (SFF)
- ST973402SS, ST9146802SS to B52A ST936751SS, ST973451SS to B616 (Critical) These codes addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. When a write is issued while the drive write cache is enabled and a read-verify is performed immediately afterwards, undetected data corruption can occur. For further information, please refer to retain tip H194632.
- MBB2073RC, MBB2147RC to SB07 MBD2147RC, MBD2300RC to SB17 MBE2073RC, MBE2147RC to SC14 CBRCA146C3ETS0, CBRCA300C3ETS0 to C370 This code improves sequential write performance under certain workloads when write cache is turned on.
- ST9500430SS to BD11 This is the first code release to be included in the hard drive update package.
SATA 3.5"
- WD2003FYYS-23T8B0 to 01.00D04 This is the first code release to be included in the hard drive update package.
SATA 2.5"
- WD3000BLFS-23YBU0 to 04.04V08 (Critical) This code corrects an issue where the drive may generate a false PFA alert. It also corrects an issue where the drive may be marked defunct
- ST9160511NS, ST9500530NS to BE16 This is the first code releases to be included in the hard drive update package.
=============================================================== IBM SAS Hard Disk Drive Update Program Version 1.05
SAS 2.5" (SFF)
ST9xxxx51SS to B616 ST9xxxx02SS to B52A - This code improves the robustness of write cache operations.
ST9xxxx52SS to B624 ST9xxxx03SS to B536 - This code improves the robustness of write cache operations and sequential write performance when write cache is enabled
MBD2xxxRC to SB14 - Initial release
SAS 3.5"
ST3xxxxx6SS to BA49 ST3750630SS to BC1D - This code improves the robustness of write cache operations.
SATA 3.5"
WDC WD2502ABYSxxxxx tp 02.03B04 - Fixes incorrect VPD data
SATA 2.5"
WD3000xxxxx to 04.04V05 - Adjusted PHY setting for better signal quality margin.
SATA 2.5" SSD
STEC MACH8 IOPS to 2269 GBRL0xxxxx to 4.17 GBRLBxxxxx to 4.26 - The new firmware will correct a rare data error condition in the drives where invalid data may be passed to the system without any error condition flagged.
Due to the severity of this potential issue, IBM strongly recommends applying this firmware as soon as possible.
For further information, please refer to retain tip H195663. =================================================================
IBM SAS Hard Disk Drive Update Program Version 1.04
SAS 2.5" (SFF)
CBRBAxxxxxx to C49B - Modified VPD for JSxx Blades
MBBxxxxxx to SB05 - Fixed a performance issue when synchronizing or rebuilding an array when used in a LSI 1064 based SAS controller
MBC2073RC to SC04 - Fixed a performance issue when synchronizing or rebuilding an array when used in a LSI 1064 based SAS controller
SAS 3.5"
MBAxxxxxx to SA06 - Fixed a performance issue when synchronizing or rebuilding an array when used in a LSI 1064 based SAS controller
ST3xxxxx6SS to BA48 - This code addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. When a write is issued while the drive write cache is enabled and a read-verify is performed immediately afterwards, undetected data corruption can occur. For further information, please refer to retain tip H194632
ST3750630SS to BC1A - This code addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. When a write is issued while the drive write cache is enabled and a read-verify is performed immediately afterwards, undetected data corruption can occur. For further information, please refer to retain tip H194632
- Fixes a hang condition during failover operation on a Bladecenter-S chassis with an RSSM controller.
BBAxxxxxx to BH0K - Fixes an issue where a drive may prematurely report a PFA trip
GNAxxxxxx to BH0J - Fixes an issue where a drive may prematurely report a PFA trip
SATA 3.5"
ST31000340NS, ST370330NS, ST3250310NS, ST3500320NS to BB12 - This code addresses a rare potential for data corruption. For this issue to occur, the drive write cache must be enabled. When a write is issued while the drive write cache is enabled and a read-verify is performed immediately afterwards, undetected data corruption can occur. For further information, please refer to retain tip H194632
- This code addresses a rare potential for data loss. After a power cycle, the drive will no longer be available and becomes unresponsive. Data will become inaccessible due to the drive not responding. For further information, please refer to retain tip H194623.
WDC WD2502ABYSxxxxx tp 02.03B04 - Fixes incorrect VPD data
SATA 2.5"
WD3000xxxxx to 04.04V04 - Fixes a Critical issue - IBM recommends a backup of the data on the drive before attempting to update the firmware. This is a fix for an issue where data required for spinup of the drive may be overwritten rendering the drive inoperable on a subsequent warm or cold system reboot.
- Fixes a issue with an internal timer that may cause drive to go offline when used in a non-raid environment.
IBM SAS Hard Disk Drive Update Program Version 1.03
Added support for the following controllers:
IBM ServeRAID MR10il SAS Controller IBM ServeRAID MR10is SAS Controller IBM ServeRAID BR10i SAS Controller IBM ServeRAID BR10il SAS/SATA Controller IBM SAS/SATA RAID Kit IBM SAS Expansion Card (CFFv) for IBM BladeCenter IBM SAS Connectivity Card (CFFv) for IBM BladeCenter
New updates to drives with product ID strings of:
SAS 2.5" (SFF)
ST9146802SS, ST973402SS to B529 - Added support for JS2x Blades in a Bladecenter-S chassis - Picked up the latest network roll of firmware fixes to address some unexpected system hangs,
ST936751SS, ST973451SS to B615 - Added support for JS2x Blades in a Bladecenter-S chassis - Picked up the latest network roll of firmware fixes to address some unexpected system hangs,
CBRBAxxxxxx to C495 - Initial release
MBBxxxxxx to SB04 - Initial release
MBC2073RC to SC03 - Initial release
SAS 3.5"
VPBAxxxxxx to A496 - Added support for JS2x Blades in a Bladecenter-S chassis
ST3146855SS, ST3300655SS, ST373455SS to BA29 - Added support for JS2x Blades in a Bladecenter-S chassis - Picked up the latest network roll of firmware fixes to address some unexpected system hangs,
ST3450856SS to BA47 - IBM was notified by our vendor that there is a defect in a level of firmware used in the IBM 450GB 15K SAS 3.5" HS HDD (PN 41Y8454) in option 42D0519, which under certain conditions may lead to data being written or read back incorrectly on the drive. IBM has worked closely with the vendor to identify the problem and developed a firmware fix to resolve the problem. Customers should upgrade to firmware level BA47
MBAxxxxxx to SA05 - Initial release
ST3750630SS to BC17 - Initial release
SATA 3.5"
ST3250620NS, ST3500630NS, ST3750640NS to 3.AEV
ST3250621NS, ST3500631NS, ST3750641NS to 4AEV
ST31000340NS, ST3750330NS, ST3250310NS, ST3500320NS to BB10 - Initial release
HUA721050KLA330, HUA721075KLA330, HUA721010KLA330, to AB4A - Initial Release
SATA 2.5" SSD
GBRL001xxx, GBRL0031xxx to 4.14 - corrects intermittent hangs during operations =============================================================
IBM SAS Hard Disk Drive Update Program Version 1.02
Support of ServeRaid 8s Raid controller Support of ServeRaid 10i Raid controller Support of ServeRaid 10k Raid controller Support of ServeRaid 10m Raid controller Support of LSI 1078 SAS controller Support of SATA drives attached to SAS controllers
Support and updates to drives with product ID strings of:
VPAxxxxxx to A650 Change to improve performance in sequential write workloads Improvements to internal drive logging and media checking. Critical Fix: This code addresses a rare potential for data loss This code update should be applied to prevent the event from occurring.
ST340XXXAS and ST380XXXAS to 3.48 Fix to address Read Log Command abort error.
ST340XXXAS, ST380XXXAS and ST3160XXXAS to 3.05 Fix to address intermittent hard drive no-shows after system comes out of hibernation.
ST3500641NS to 3.AES Changes to the refresh rate of the DRAM used on the drive.
ST3500640NS to 3.AEJ Initial release.
HDTXX... & HDSXX... codes go to Masked ROM version. HDS725050KLA360 to AQ1A to also Fix an issue that occurs while running in NCQ mode with write cache disabled.
ST3xxxx4SS to BA26 Improves intialization times with some ServeRaid controllers Performance improvements under some sequential workloads.
ST3xxxx5SS to BA35 Improves intialization times with some ServeRaid controllers
ST9xxx51SS to B612 Intial release of firmware
ST9xxxx2SS to B526 Improves intialization times with some ServeRaid controllers
MAUxxxx and MAXxxxx Added support for new SAS features required by new SAS controllers.
IBM SAS Hard Disk Drive Update Program Version 1.01 Please refer to RETAIN tip H186019.
Support of ServeRaid 8e Raid controller Support of ServeRaid 8k Raid controller Support of ServeRaid 8l Raid controller Support of on-board LSI 1064 controller IBM MegaRaid 8480 Raid Controller
Firmware updates to drives with Product ID strings:
GNAxxxx and BBAxxxx to BH0G Picks up the latest network roll of firmware fixes to improve performance under some sequential workloads and improvements to signal quality parameters.
ST9xxxx to B51D amd ST3xxxx to BA18 Picks the latest network roll of firmware fixes to address unexpected system hangs and some performance improvements.
MAVxxxx to S116 and MAYxxxx to T107 Picks up the latest network roll of firmware fixes and to improve signal quality parameters.
MAXxxxx to T904 Initial release ============================================================
IBM SAS Hard Disk Drive Update Program Version 1.00 Initial Release
Support of Adaptec 48xxx based controllers Support of ServeRaid 8i Raid controller Support and updates to drives with product ID strings of: ST936701SS ST973401SS ST336754SS ST373454SS GNAxxxxx BBAXXXXX
ibm_fw_hdd_sas-1_11_windows_32-64_chg
=============================================================================== Emulex iSCSI Device Driver for Windows ===============================================================================
Device Driver Version: 4.1.334.0
Problems Fixed:
- Logout handling on boot session when multiple sessions exists to the same boot target - Support PCI ID as per Rev 1.18 for Windows iSCSI Driver - Multipath IO fails producing a BSOD - Persistent login to Max targets + 1 from WMI causes a hang - Update Nomad Device Name as per 1.19 for Windows iSCSI drivers - PCI ID: Updates for Endeavor 2 - PCI IDs Rev 1.22
- Crash in be2iscsi!hwi_complete_drvr_msgs when connecting to HW Target - Need to add support for Win8 builds - Add Windows 7 Client OS Support - Windows iSCSI driver copyright doesn't match with NIC's information - Win iSCSI Drivers are not supported for BE2 devices and driver will not load - Emulex: Windows 2003 blue screen when running iSCSI traffic with OCe10102-I - Romley PCI ID: Update PCI IDs to revision 1.09: Add Romley LOM PCI IDs - Remove PCI IDs of OCm11104-NM-P and OCm11104-NT-P (no iSCSI support) - Fix Prefast and compile warnings - Handle iSCSI inbox submission requirements for Windows8 - Branding: Integrate Emulex txtsetup.oem into MGMT and possible OEMCD package - Windows 8 - interrupt redirection, new event logging features are not enabled - Branding: Modify Win iSCSI driver display strings to reflect Emulex OneConnect branding - Enable W4 option for build - wincustom.h not available for acitcfg.h - Add PCI IDs / Update IBM String - Loop was overshooting the MaxTargetsAllowed in WinReportPersistentTargets and WinInitPersistentTargets - Windows does not report error on setting invalid ETO value - Incorrect allocation length calculation for WMI_SEQ_METHOD_SCSIINQUIRY_IO and WMI_SEQ_METHOD_SCSIREADCAPACITY_IO in WinBuildIoForWmi - MILI does not update LDTO and ETO value according to registry entry - iSCSI boot install not able to see iSCSI boot disk - Require iSCSI driver to support BE2 on WinPE - Update PCI IDs to Rev 1.12 - Win iSCSI Driver - ETO expiry does not show any error message in Eventlog - Update PCI IDs to Rev 1.13 - Win iSCSI Driver - Target login fails with device IOCTL failed error message - WMI application reports the same value for both IPAddress and SubnetMask - Update PCI IDs to Rev 1.14-Win iSCSI Driver - Win driver issues at higher IOPs - System going to shutdown upon Hibernate on windows iSCSI boot - iSCSI driver fails to copies crashdump to a target LUN - Need to log an informational event for targets coming back after ETO - Need to log informational and warning event in event log for interrupt redirection support
Integrated Management Module II (IMM2) Firmware Update Change History
Version 1.65, 1AOO32O - Support the power supply Over-Subscription feature - Support the 750 Watt DC power supply for System x3650 M4,x3550 M4 - Support IBM 1.2TB High IOPS MLC Mono Adapter,IBM 2.4TB High IOPS MLC Duo Adapter for System x3650 M4,x3550 M4 - Support IBM LLM-SM Dual Port 10GbE SFP+ Adapter for System x3650 M4 - Fixed an abnormal Fan Zone recovery problem - Fixed a problem that IMM2 Email notification doesn't support an e-mail address with the underscore '_' character - Fixed a power policy "Restore" problem - Fixed a problem where the LDAP hostname can't be changed by ASU
Version 1.60, 1AOO32P - Fixed a problem where the Chassis Management Module cannot correctly get the Mezzanine card information for the Flex System x220 Compute Node - Fixed a problem where the PreBoot DSA firmware could not be updated under VMWare ESXi 5 through the Flex System Manager's Update Manager - Fixed a problem where an IMM2 communications error can occur if an unexpected response causes VMware to spawn multiple processes when it does not receive the data it expects from the IMM2
Version 1.59, 1AOO32K - Supports System x3300 M4, Machine Types: 7382
Version 1.53, 1AOO30Z - Included an update to the FPGA that fixes an intermittent issue where the CPUs do not show up in a system with a RAID card installed, when the AC is removed and reapplied from the server without allowing sufficient time for the system hardware to completely discharge
Version 1.52, 1AOO34A - Added redundant power supply and hot swap hard drive support in System x3100 M4
Version 1.51, 1AOO30Y - Support for NVIDIA Tesla K10, M2070Q, M2090 GPU cards on System X iDataPlex dx360 M4
Version 1.50, 1AOO30W - Supports System HS23, Machine Types: 7875,1929 - Supports System x3650 M4, Machine Types: 7915 - Supports System x3550 M4, Machine Types: 7914 - Supports System x3500 M4, Machine Types: 7383 - Added support for the Intel Xeon E5-2643 processor on the HS23 in BCH-R3, BCS and BCHT chassis - Fixed a problem where the IMM2 incorrectly logged an "Unsupported blade/blower combination" on the HS23 in the BC-E 8677 chassis - Fixed a power restore problem on systems that have 2 Delta power supplies installed - Fixed a problem in System x3650 M4, x3550 M4, x3500 M4, where OpenLDAP Group Authentication filtering function doesn't work - Fixed a problem in System x3650 M4, x3550 M4, x3500 M4, where LDAP account can not login using the AD_CrossDomain tree
Version 1.45, 1AOO28S - Fixed a problem in Flex System x220 where the Chassis Management Module (CMM) Command Line Interface can't display the Mezzanine card information - Fixed a problem in Flex System x220 and x240 where the prebootDSA firmware cannot be updated through Flex System Manager's Update Manager
Version 1.40, 1AOO30T - Supports System x3750 M4, Machine Types: 8722, 8733
Version 1.38, 1AOO30D - Supports System x3630 M4, Machine Type: 7158 - Supports System x3530 M4, Machine Type: 7160
Version 1.36, 1AOO30P - Fixed an intermittent remote media failure in system HS23E - Fixed a problem in system HS23E where remote media does not work when two or more users have concurrent remote control sessions
Version 1.34, 1AOO28Q - Supports Flex System Manager Node, Machine Type: 8731 - Supports Flex System x240 Compute Node, Machine Types: 7863, 8737, 8738 - Supports Flex System x220 Compute Node, Machine Types: 2585, 7906
Version 1.32, 1AOO28N - Supports System x3630 M4, Machine Type: 7158 - Supports System x3530 M4, Machine Type: 7160 - Fixed a problem that may see unexpected fan events after power on in x3100 M4 and x3250 M4 systems - Enhanced robustness on I2C bus test
Version 1.30, 1AOO28M - Supports System HS23E, Machine Types: 8038,8039
Version 1.26, 1AOO26N - Supports System x3650 M4, Machine Types: 7915
Version 1.25, 1AOO26K - Supports System x3550 M4, Machine Types: 7914 - Supports System x3500 M4, Machine Types: 7383 - Supports System X iDataPlex dx360 M4, Machine Types: 7912,7913
Version 1.22, 1AOO26O - Supports System HS23, Machine Types: 7875,1929 Problems Fixed: - Fixed a problem where the BOFM configuration may be lost after a blade power cycle - Fixed an LED error indication that occurs on the BPE4 - Fixed a problem where the Info LED lights during the discovery stage - Fixed a problem where an ABR event is not logged - Fixed an intermittent communication problem between the AMM and IMM2 - Fixed a problem that causes the remote media function to hang when a second user attempts to mount remote media - Fixed a problem where the 'break' keyboard function doesn't work with Serial Over LAN
Version 1.21, 1AOO26L - Supports System HS23, Machine Types: 7875,1929
Version 1.10, 1AOO24B - Supports System dx360 M4, Machine Types: 7918,7919
Version 1.05, 1AOO10K - Fixed the false alert issue in redundant PSU model
Version 1.00, 1AOO10I - Initial Release - Supports System x3250 M4, Machine Types: 2583,2587 - Supports System x3100 M4, Machine Types: 2582,2586
(C) Copyright International Business Machines Corporation 2008 - 2012. All rights reserved.
ibm_fw_imm2_1aoo32o-1_65_anyos_noarch_chg
=============================================================================== Emulex NIC Device Driver for Windows ===============================================================================
Device Driver Version: 4.1.370.0
Problems Fixed:
- TOE with RSC enabled causes UE - Registry key for RSS Hash types - RSC ECN Coalescing Change - WOL Capabilities - Driver parameter query failures - Sleep Stress test failed with bugcheck C4 during driver verify - BSOD 9F during shutdown if device stops responding - RSS queues may change port during MPRestart and MPPause - WOL assert for functions that don't support WOL
- Emulex: Large Receive Offload support needed in Windows NIC driver - Win WoL: Need to report WoL based on ARM reported capabilities - Support driver strings for existing cards - RSS code may access PerMessage beyond end of array - 16 queue RSS for BE3 on Windows 2008 R2 - fix unverified mode of occfg to allow customer workarounds - 16 queue RSS lockup if SRIOV enabled in registry - Standard Property Page for 1 port Windows Azure card - Timeout RQ flush to avoid bugcheck during shutdown - Change receive buffer alignment to use Windows 2008 R2 TCPIP fast path - BSOD - Replacing BE3 card with a BE2 card after installation of new driver and firmware on Win 2k3 SP2 R2x64 (vNIC enabled IBM machine) - be2nd62.inf failed ChkInf - VMQ registry keys displayed in Windows 2008 - be_function_prepare_nonembedded_ioctl overwrites version field - autoi reboot fails on Win2K8 x64 when verifier enabled - NIC driver causes BSoD during shutdown whenever disable firewall or join domain network - Sleep Stress test failed with bugcheck C4 during driver veri - Disable TOE by default for IBM - BSOD 9F during shutdown if device stops responding
- Emulex: Rebrand Windows NIC Driver "Emulex" instead of SE - Emulex: PCIe Link failures, errors, resets Must be recoverable events in Driver - OID_SENGINES_UE_STATE must return SUCCESS with UE status in the InfoBuffer - Update untagged rx packet behavior after VMQ merge - Improve driver to fix interrupt register - Diagnostic event log doesn't update in realtime if >64 messages exist for the device - VMQ vlan and mac filtering problems - Fix PVID support for VMQs - OID_SENGINES_DUMP_TINYLOG must print string in application - fix build sources to build win8 driver - Duplicate code in SA for win32 user mode - add ndis63 folders and build a win8 driver (be2nd63.sys) - add new boards to inf - PCI-Express Status displays garbage values (Virtual Function) - Register Access and MAC Loopback diagnostic tests fail (for VFs) - Custom Property Page permits invalid options when adapter is disabled - add win8 builds to build script - VLAN Behaviour in VFs - Change UE recovery to timeout algorithm - UE recovery with rss changing parameters stalls driver unload - Property page updates for UE recovery - Diagnostics should be disabled when device is disabled - UE recovery logging and user interface improvements - add option in becfg to just disable or enable a particular adapter - beclib queue_context fixes diagnostics - Add Windows 7 Client OS Support - Filter eth rx packets by cqe port field for 4 port boards - Incorrect PCI Function Number for SR-IOV - All BE2 Windows systems fail to boot after installing build - Copyright right issues with Windows NIC Driver - BE2: Win NIC drivers should not load on Windows 7 - if BE2 device - Windows NIC ping fails on BE2 based adapters - PG: ETS support for NIC traffic - Win NIC support - VMQs increase min MSI messages - VMQ support for certain CPU affinities may fail - Win 7 32 bit NIC drivers do not load on BL-460c G7 BE3 LOM. - Romley PCI ID: Update PCI IDs to revision 1.09: Add Romley LOM PCI IDs - Need to change copyright year for occfg.exe file - occfg fails to set Interrupt Moderation value to 1 - VMQ creation fails if SR-IOV is enabled - SR-IOV: Add support for Windows 2008 & R2 running on SR/IOV virtual function - Emulex: CHKINF test fails on be2net.inf: remove duplicate device entries - Emulex: NDIS6.0 RSS OIDs should be supported in Windows 2008 R2 - Emulex: NIC Driver will not load on x64 Win 2008 R2 system - Branding: Change file description for occfg.exe from BladeEngine to OneConnect - IA-64: BSOD during NDIS 6.0 Test with WLK 1.6 test kit - VMQ rxf interface is not setting the header split capabilty correctly - TOE memory leak during driver load failure - Driver crash during load if adapter fails to allocate - Emulex: Team Manager Multivendor IBM & Emlx, RSS not shown in Registry and cards Properties - SR-IOV NIC Driver fails to load (Dynamic MSI) - Improve ETS algorithm - Add PCI IDs / Update IBM String (PCI ID 1.10) - NIC/TOE inf MEDIA_DESCRIPTION still contains ServerEngines - Add "VMQ Allocated" stat to CPP - delete IOCTL_CODE_READ_REG_PARAMS from trunk. - Low VMQ Receive, Bidi Rates (9014 Byte Frames, VmqLookaheadSplit on) - ndis 6.0: Faulthandling: driver stuck during unload - VMQ Performance Optimization - VMQ options not displayed in BE3 Properties Page - NDIS vmqscalability test fails - Emulex: occfg.exe is included in the wrong place for win7 x86 drops for 4.0.84.x - BD: Windows NIC driver source violations - NDIS vmq tests fail (breakpoints in protocol driver) - VMQ: Disable RSS and TOE when VMQueue enabled - create windows NIC inbox package - fix prefast errors for win8 packaging - Emulex: RSS Warning event in windows 2k8 R2 SP2 x86 System Log for non-supported NIC functions - CPP Revision version shows as 0x301 on Tomcat A2 - VMQ crash if available MSI-X messages <= 2 - *PriorityVLANTag not honored for priority tag - VMQ crash if eth send queue allocate fails - UE detection doesn't work for VF. - Win 2008r2: NIC interfaces failed to get enabled - ndistest crash on Win7 client during vmqscalability - Win: CPU Affinity range values NOT match with requirements - VMQ: Attempting to use VMQ with SR-IOV enabled fails to generate system event log entry - Failed to update registery value with occfg option - create 8 tx rings using new ioctl IOCTL_ETH_TX_CREATE_V1 - NdisTest vmqscalability fails on an IA-64 4-processor setup - occfg fails to reset parameters with "-x" option - NIC Ping failing - vNIC ping is not working on Port #1 and working on Port #0 - Incorrect VMQ VlanId in Transmit Path - win8: implement dcb oids for win8 - Ndis 6.5 WoLWin7Pattern & KeepAlive Tests fail - WakeOnLan Registry Key is disabled by default - VMQ: External virtual network switch hangs in loading with VMQ enabled - WoL Behavior in Windows 2003, 2008 - UE changes broke hibernate/standby functionality - Emulex: Require NIC driver to support BE2 on WinPE - WIN: Should remove two top empty lines from Advanced tab of NIC Properties window - Advanced property page treats "unset" and "0" as the same value - Update PCI IDs to Rev 1.12- Win NIC driver - WoL routines cause OS to crash, if Driver Verifier is on - Emulex: TOE does not offload connections for Multiple VLANs over a team on Win 2008 x86 SP2 and W2008 x64 SP2 - Emulex: Nic driver: Adapter Fatal Error on all vnics results in network cable unplugged running iperf - NIC driver displays PCIe Link width in reverse 8x instead of x8 - SR-IOV: BE2NIC driver cannot start under W2K8 SR-IOV VM machine - Cosmetic: Custom Property Page driver displays Max supported PCIe Link width as 8x, should read x8 - system crash after resume from hibernate when ETS is enabled - Wake On Lan for VFs - Update PCI IDs to Rev 1.14-Win NIC Driver - Emulex: Server Engines is referenced in oem.inf(120517) - Emulex: DF427681 & ELX CR 111913: Failover team does not use Chimney when initially created - driver should report all port speeds (PHY_LINK_SPEED_10MBPS and PHY_LINK_SPEED_100MBPS) - Forwarding rings incorrectly use type ETX_QUEUE_TYPE_STANDARD - Emulex: DF355484: Wake on LAN is not supported yet is available under Windows NIC properties - WHQL: MSFT requires reference to a CLI with NIC/iSCSI drivers (occfg.exe) - sestats gives incorrect print message when not administrator - eventlogs (diags) should compare NetCfgInstanceId as well to display logs - temperature ioctl asserts in debug driver - Add temperature to "status" custom property page
Summary ======= - Gold Release for the Broadcom 15.2 project
Caveats =======
Highlights fixes and enhancements ================================= - Fixes TG3 driver with TSO enabled having poor performance with IPV6 TCP packets. - Fixes CQ61833 - NX1 UEFI HII help menu doesn't show correct VLAN range of 1 to 4094. - Fixes CQ61639 - Expand documentation on LACP teaming requirements when changing hardware.
Version history between CDs v15.2.4.1 release and previous CD v15.0.4.1 release: ====================================================++++++================
CD Release v15.2.4.1 Previous v15.0.4.1 Product Version Version
Windows Server 2003 x64 Driver 15.2.0.3* 15.0.0.9 Windows Server 2003 IA32 Driver 15.2.0.3* 15.0.0.9 Windows Server 2008 ia32 Driver 15.2.0.5* 15.0.0.2 Windows Server 2008 x64 Driver 15.2.0.5* 15.0.0.2
Note: An asterisk (*) following a version number represents a certified driver.
This release contains the following software programs:
NetXtreme Gigabit Ethernet NDIS5.1 for Microsoft Windows 2003, 32 bit extensions - b57xp32.sys NetXtreme Gigabit Ethernet NDIS5.1 for Microsoft Windows 2003, 64 bit extensions - b57amd64.sys NetXtreme Gigabit Ethernet NDIS6.x for Microsoft Windows 2008, 32 bit extensions - b57nd60x.sys NetXtreme Gigabit Ethernet NDIS6.x for Microsoft Windows 2008, 64 bit extensions - b57nd60a.sys
* Third-party trademarks and copyrights are the property of their respective owners.
Broadcom, Broadcom Advanced Server Program, Broadcom Advanced Server Control Suite, and Smart Load Balance are registered trademarks of Broadcom Corporation.
brcm_dd_nic_15_2_0_5b_windows_32-64_chg
Broadcom Firmware Update Utility for IBM servers and options using the Broadcom NetXtreme and NetXtreme II ethernet adapter.
Version 2.1.8d, June 07, 2012
This package was modified to update the firmware for the 39Y6066, 42C1780, 42C1781, 42C1790, 42C1791, 44W4466, 44W4475, 44W4479, 44X1940, 46M6164, 46M6168, 49Y4220, 49Y7910 and 81Y3133. These are the only change from version 2.1.7e to 2.1.8d.
This package updates the Broadcom firmware for the following items:
For information regarding changes specific to your product, download the change history zip file (brcm_fw_nic_2.1.8d-chg_anyos_anycpu.zip). The name of the files containing changes for your product are listed above.
package version 2.1.8d (See brcm_fw_nic_2.1.8d-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 46M6164, 46M6168, 49Y7910 and 81Y3133. - Changes were mande to the PXE code for the 39Y6066, 42C1780, 42C1781, 42C1790, 42C1791, 44W4466, 44W4475, 44W4479, 44X1940, 46M6164, 46M6168, 49Y4220, 49Y7910 and 81Y3133. - Changes were made to the UEFI code for the 42C1780, 42C1781, 42C1790, 42C1791, 44W4466, 44W4475, 44W4479, 44X1940, 46M6164, 46M6168, 49Y4220, 49Y7910 and 81Y3133. - Changes were made to the iSCSI code for the 42C1780, 42C1781, 49Y4220 and 49Y7910.
package version 2.1.7e (See brcm_fw_nic_2.1.7e-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the UEFI code for the 42C1780, 42C1781, 44W4475 , 44W4479 , 44X1940
and 49Y4220. - Added support for the 49Y7910.
package version 2.1.7d (See brcm_fw_nic_2.1.7d-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the UEFI code for the 42C1780, 42C1781, 42C1790, 42C1791, 44W4465 , 44W4466 , 44W4475 , 44W4479 , 44X1940 , 46M6164 , 46M6168, 49Y4220 and 81Y3133. - Fixed a problem where the MAC addresses for the HS22/HS22V LOM were incorrectly set to zero.
package version 2.1.7c (See brcm_fw_nic_2.1.7c-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 46M6164 and 46M6168. - Changes were made to the NCSI code for the 46M6164 and 46M6168. - Changes were made to the PXE code for the 42C1790, 42C1791, 46M6164, 46M6168, 44W4465 and 44W4466. - Changes were made to the UEFI code for the 42C1790, 42C1791, 46M6164, 46M6168, 44W4465 and 44W4466. - Changes were made to the iSCSI code for the 42C1780, 42C1781 and 49Y4220.
package version 2.1.7b (See brcm_fw_nic_2.1.7b-chg_anyos_anycpu.zip for details.) Problems Fixed: - Fixed problem running the PPC firmware update tool on some PPC systems.
package version 2.1.7a (See brcm_fw_nic_2.1.7a-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1909, 1936, 1949, 3808, 3809, 3815, 3817, 3821, 3822, 4195, 4198, 4199, 4254, 4255, 7141, 7144, 7145, 7146, 7148, 7149, 7164, 7233, 7234, 7378, 7379, 7380, 7809, 7836, 7837, 7839, 7870, 7871, 7901, 7902, 7944, 7945, 7946, 7947, 42C1780, 42C1781, 42C1790, 42C1791, 44W4475, 44W4479, 44X1940, 46M6164, 46M6168 and 49Y4220 - Changes were made to the NCSI code for the 1909, 1936, 1949, 3808, 3809, 3815, 3817, 3821, 3822, 4195, 4198, 4199, 4254, 4255, 7145, 7146, 7148, 7149, 7164, 7378, 7379, 7380, 7809, 7836, 7837, 7839, 7870, 7871, 7872, 7944, 7945, 7946, 7947, 44W4475, 44W4479, 46M6164 and 46M6168. - Changes were made to the iSCSI code for the 42C1780, 42C1781 and 49Y4220. - Changes were made to the UEFI code for the 46M6164, 46M6168, 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 42C1780, 42C1781, 42C1790, 42C1791 and 49Y4220. - Changes were made to the PXE code for the 39Y6066, 42C1780, 42C1781, 42C1790, 42C1791, 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 46M6164, 46M6168 and 49Y4220.
package version 2.1.6b (See brcm_fw_nic_2.1.6b-chg_anyos_anycpu.zip for details.) Problems Fixed: - The update tool was modified to fix a problem updating the firmware when certain option cards are installed in the system.
package version 2.1.6a (See brcm_fw_nic_2.1.6a-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1909, 1936, 1949, 3808, 3809, 3815, 3817, 3821, 3822, 4195, 4198, 4199, 4254, 4255, 7141, 7144, 7145, 7146, 7148, 7149, 7164, 7233, 7234, 7378, 7379, 7380, 7809, 7836, 7837, 7839, 7870, 7871, 7901, 7902, 7944, 7945, 7946, 7947, 42C1780, 42C1781, 44W4475, 44W4479, 44X1940, 46M6164, 46M6168 and 49Y4220 - Changes were made to the NCSI code for the 46M6164, 46M6168, 44W4465, 44W4466, 42C1790, and 42C1791. - Changes were made to the iSCSI code for the 42C1780, 42C1781 and 49Y4220. - Changes were made to the UEFI code for the 46M6164, 46M6168, 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 42C1780, 42C1781, 42C1790, 42C1791 and 49Y4220. - Changes were made to the PXE code for the 39Y6066, 42C1780, 42C1781, 42C1790, 42C1791, 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 46M6164, 46M6168 and 49Y4220.
package version 2.1.5b (See brcm_fw_nic_2.1.5b-chg_anyos_anycpu.zip for details.) Problems Fixed: - Added iSCSI config update support for mfg.
package version 2.1.5a (See brcm_fw_nic_2.1.5a-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the NCSI code for the 1909, 1936, 1949, 3808, 3809, 3815, 3817, 3821, 3822, 4195, 4198, 4199, 4254, 4255, 7145, 7146, 7148, 7149, 7164, 7378, 7379, 7380, 7809, 7836, 7837, 7839, 7870, 7871, 7872, 7944, 7945, 7946, 7947, 44W4475, 44W4479, 42C1790 and 42C1791 - Changes were made to the UEFI code for the 46M6164, 46M6168, 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 42C1780, 42C1781, 42C1790, 42C1791 and 49Y4220. - Changes were made to the IPMI code for the 7141, 7144, 7233, 7234, 7901 and 7902.
package version 2.1.4a (See brcm_fw_nic_2.1.4a-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the PXE code for the 39Y6066, 42C1780, 42C1781, 42C1790, 42C1791, 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 46M6164 and 46M6168. - Changes were made to the UEFI code for the 42C1780, 42C1781, 42C1790, 42C1791, 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 46M6164 and 46M6168.
package version 2.1.3c (See brcm_fw_nic_2.1.3c-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the iSCSI code for the 42C1780 and 42C1781. - Changes were made to the UEFI code for the 42C1780, 42C1781, 42C1790, 42C1791, 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 46M6164 and 46M6168. - Changes were made to the boot code for the 46M6164 and 46M6168.
Enhancements: - Added version check to prevent firmware updates of code that is not newer than already installed code. - Added "-force" command line option to allow forcing the firmware update.
package version 2.1.3b (See brcm_fw_nic_2.1.3b-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1936, 1949, 3808, 3809, 3815, 3817, 3821, 3822, 4198, 4199, 4254, 4255, 7141, 7144, 7145, 7146, 7233, 7234, 7378, 7379, 7380, 7836, 7837, 7839, 7870, 7871, 7901, 7902, 7944, 7945, 7946, 7947, 42C1780, 42C1781, 44W4475, 44W4479 and 44X1940. - Changes were made to the NCSI code for the 1936, 1949, 3808, 3809, 3815, 3817, 3821, 3822, 4198, 4199, 4254, 4255, 7145, 7146, 7378, 7379, 7380, 7836, 7837, 7839, 7870, 7871, 7944, 7945, 7946, 7947, 44W4475 and 44W4479. - Changes were made to the PXE code for the 39Y6066, 42C1780, 42C1781, 44W4475, 44W4479 and 44X1940. - Changes were made to the UEFI code for the 42C1780, 42C1781, 44W4475, 44W4479 and 44X1940. - Changes were made to the iSCSI code for the 42C1780 and 42C1781.
package version 2.1.3a (See brcm_fw_nic_2.1.3a-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the PXE code for the 26K4842, 39R8624, 39Y9306, 39Y9310, 42C1600, 42C1632, 46M6164, 46M6168, 44W4465, 44W4466, 73P9030, 22P7801, 31P6301, 31P6401, 39Y6079, 39Y6088, 39Y6093, 39Y6098, 42C1790, 42C1791, 73P3501, 73P4001, 73P4101 and 73P4201. - Changes were made to the UEFI code for the 46M6164, 46M6168, 44W4465, 44W4466, 42C1790, and 42C1791. - Changes were made to the NCSI code for the 46M6164, 46M6168, 44W4465, 44W4466, 42C1790, and 42C1791. - Changes were made to the boot code for the 46M6164, 46M6168, 44W4465, 44W4466, 42C1790, and 42C1791.
package version 2.1.1c (See brcm_fw_nic_2.1.1c-chg_anyos_anycpu.zip for details.) Problems Fixed: - none.
Enhancements: - Added support for the 1949, 4254, 4255, 7378, 7379, 7380, 7871, 7944 and 7945.
package version 2.1.1b (See brcm_fw_nic_2.1.1b-chg_anyos_anycpu.zip for details.) Problems Fixed: - Fixed problem where the firmware update failed to run correctly on RHEL5u4-XEN.
package version 2.1.1a (See brcm_fw_nic_2.1.1a-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1885, 1913, 1914, 1915, 1936, 3808, 3809, 3815, 3817, 3821, 3822, 4198, 4199, 7141, 7144, 7163, 7233, 7234, 7809, 7836, 7837, 7839, 7870, 7901, 7902, 7946, 7947, 7978, 7979, 7995, 7996, 7997, 8853, 8877, 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 39Y6066, 42C1780, 42C1781, 42C1790 and 42C1791. - Changes were made to the NCSI code for the 1936, 3808, 3809, 3815, 3817, 3821, 3822, 4198, 4199, 7809, 7836, 7837, 7839, 7870, 7946, 7947, 44W4465, 44W4466, 44W4475, 44W4479, 42C1790 and 42C1791. - Changes were made to the PXE code for the 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 39Y6066, 42C1780, 42C1781, 42C1790 and 42C1791. - Changes were made to the UEFI code for the 44W4465, 44W4466, 44W4475, 44W4479, 44X1940, 42C1780, 42C1781, 42C1790 and 42C1791. - Changes were made to the iSCSI code for the 42C1780 and 42C1781.
Enhancements: - Added support for the 46M6164 and 46M6168.
package version 2.1.0a (See brcm_fw_nic_2.1.0a-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1936, 3808, 3809, 3815, 3817, 3821, 3822, 4198, 4199, 7141, 7144, 7233, 7234, 7836, 7837, 7839, 7870, 7901, 7902, 7946, 7947, 42C1780, 42C1781, 42C1790, 42C1791, 44W4465, 44W4466, 44W4475, 44W4479 and 44X1940. - Changes were made to the PXE code for the 39Y6066, 42C1780, 42C1781, 42C1790, 42C1791, 44W4465, 44W4466, 44W4475, 44W4479 and 44X1940. - Changes were made to the ISCSI code for the 42C1780 and 42C1781.
package version 2.0.9h (See brcm_fw_nic_2.0.9h-chg_anyos_anycpu.zip for details.) Problems Fixed: - Removed the minimum boot code level check for the 44W4465 and 44W4466.
Enhancements: - Added support for the 3808, 3809, 3815, 3817, 3821, 3822, 4198, 4199, 7836, 7837, 7839 and 9233.
package version 2.0.9g (See brcm_fw_nic_2.0.9g-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the UEFI code for 42C1780, 42C1781, 42C1790, 42C1791, 44W4465 44W4466, 44W4475, 44W4479 and 44X1940. - Fixed the problem where the PXE code for the 44W4465 and 44W4466 failed to update under 64bit Linux.
Enhancements: - Added support for the 7946 and 7947.
package version 2.0.9f (See brcm_fw_nic_2.0.9f-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1885, 1913, 1914, 1915, 7141, 7144, 7233, 7234,
7940, 7941, 7971, 7972, 7978, 7979, 7985, 7995, 7996, 7997, 8853, 8877, 39Y6066, 42C1780, 42C1781, 42C1790, 42C1791, 44W4465, 44W4466 and 44W4479. - Changes were made to the NCSI code for the 42C1790, 42C1791, 44W4465, 44W4466 and 44W4479. - Changes were made to the PXE code for 42C1790, 42C1791, 44W4465, 44W4466 and 44W4479.
Enhancements: - Added support for the 1936, 7870 and 44W4475. - Added UEFI code for 42C1790, 42C1791, 44W4465, 44W4466, 44W4479 and 44X1940.
package version 2.0.9e (See brcm_fw_nic_2.0.9e-chg_anyos_anycpu.zip for details.) Problems Fixed: - Added a bnx2 device driver version check for version 1.6.6b or greater.
package version 2.0.9c (See brcm_fw_nic_2.0.9c-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1885, 1915, 7901, 7902, 7971, 7972, 7995, 8853 and 44W4479. - Changes were made to the PXE code for the 39Y6066, 42C1780, 42C1781 and 44W4479. - Changes were made to the iSCSI code for the 42C1780 and 42C1781 - Changes were made to the NCSI code for the 44W4479.
Enhancements: - Added support for the 44X1940.
package version 2.0.8f (See brcm_fw_nic_2.0.8f-chg_anyos_anycpu.zip for details.) Problems Fixed: - Fcode support was removed for the PXE code for the 44W4465 and 44W4466. This change does not result in a change in the PXE code version number. - Changes were made to the PXE code for the 39Y6066, 42C1780 and 42C1781 to fix a problem where some systems hang when loading PXE code.
package version 2.0.8e (See brcm_fw_nic_2.0.8e-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the PXE code for the 39Y6066, 42C1780, 42C1781 and 44W4479. - Changes were made to the IPMI code for the 7141, 7144, 7233 and 7234. - Changes were made to the UMP code for the 7901 and 7902.
Enhancements: - Added support for the 6388, 7942, 44W4465 and 44W4466.
package version 2.0.8d (See brcm_fw_nic_2.0.8d-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 7141, 7144, 7233 and 7234.
Enhancements: - Added support for the 42C1780 and 42C1781.
package version 2.0.8c (See brcm_fw_nic_2.0.8c-chg_anyos_anycpu.zip for details.) Problems Fixed: - None.
Enhancements: - Added support for the 7901 and 7902
package version 2.0.8b (See brcm_fw_nic_2.0.8b-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the PXE code for the 39Y6066.
Enhancements: - Added support for the 44W4479.
package version 2.0.8a (See brcm_fw_nic_2.0.8a-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1885, 1913, 1914, 1915, 7141, 7144, 7971, 7972, 7978, 7979, 7985, 7995, 7996, 7997, 8853, 8877, 9228, 9229, 9230 and 39Y6066. - Changes were made to the ASF code for the 6218, 6223, 6225, 6227, 6228, 8488, 8648, 9228, 9229, 9230. - Changes were made to the UMP code for the 39Y6066. - Changes were made to the PXE code for the 22P7801, 26K4842, 31P6301, 31P6401, 39R8624, 39Y6066, 39Y6079, 39Y6088, 39Y6093, 39Y6098, 39Y9306, 39Y9310, 42C1600, 42C1632, 73P3501, 73P4001, 73P4101, 73P4201, 73P9030. - Changes were made to the IPMI code for the 1916, 8014 and 8028.
Enhancements: - Added support for the 7233, 7234, 7940 and 7941.
package version 2.0.7 (See brcm_fw_nic_2.0.7-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the PXE code for the 22P7801, 26K4842, 31P6301, 31P6401, 39R8624, 39Y6066, 39Y6079, 39Y6088, 39Y6093, 39Y6098, 39Y9306, 39Y9310, 42C1600, 42C1632, 73P3501, 73P4001, 73P4101, 73P4201, 73P9030.
Enhancements: - Added support for the 1916, 8014 and 8028.
package version 2.0.6 (See brcm_fw_nic_2.0.6-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1913, 1914, 7141, 7143, 7144, 7978, 7979, 7996, 7997, 8877 and 39Y6066. - Changes were made to the UMP code for the 39Y6066. - Changes were made to the PXE code for the 39Y6066.
package version 2.0.5 (See brcm_fw_nic_2.0.5-chg_anyos_anycpu.zip for details.) Problems Fixed: - None
Enhancements: - Added support for the 4190, 4191, 4192, 4193, 4194, 4367 and 4368.
package version 2.0.4 (See brcm_fw_nic_2.0.4-chg_anyos_anycpu.zip for details.) Problems Fixed: - None
Enhancements: - Added support for the 7141, 7143 and 7144.
package version 2.0.3 (See brcm_fw_nic_2.0.3-lin-win-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1885, 1913, 1914, 1915, 7971, 7972, 7978, 7979, 7985, 7995, 8853, 8877, 39Y6066. - Changes were made to the IPMI code for the 1879, 1880, 1883, 1884, 1887, 4362, 4363, 4364, 4365, 4366, 7362, 7364, 7365, 7367, 7973, 7974, 7975, 7976, 7977, 7981, 7984, 7986, 8485, 8490, 8491, 8832, 8835, 8837, 8840, 8841, 8843, 8848, 8849, 8850, 8863, 8864, 8865, 8866, 8872, 8874, 8878, 8879. - Changes were made to the ASF code for the 6218, 6223, 6225, 6227, 6228, 8488, 8648, 9228, 9229, 9230. - Changes were made to the PXE code for the 22P7801, 26K4842, 31P6301, 31P6401, 39R8624, 39Y6066, 39Y6079, 39Y6088, 39Y6093, 39Y6098, 39Y9306, 39Y9310, 42C1600, 42C1632, 73P3501, 73P4001, 73P4101, 73P4201, 73P9030.
package version 2.0.0b (See brcm_fw_nic_2.0.0b-nx-nx2-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changed the firmware update process to NOT reset the ethernet devices during the firmware update process.
package version 2.0.0 (See brcm_fw_nic_2.0.0-nx-nx2-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the UMP (Universal Management Port) code for the 1885, 7971, 7972, 7995 and 8853.
package version 1.1.1 (See brcm_fw_nic_1.1.1-nx-nx2-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 1879, 1880, 1887, 4347, 4348, 4362, 4363, 4364, 4365, 4366, 6218, 6223, 6225, 6227, 6228, 7969, 7973, 7974, 7975, 7976, 7977, 7992, 8485, 8486, 8488, 8490, 8491, 8648, 8837, 8840, 8841, 8849, 39Y6098, 39Y9306, 42C1600, 42C1632 and 73P3501. - Changes were made to the IPMI code for the 1879, 1880, 1887, 4362, 4363, 4364, 4365, 4366, 7969, 7973, 7974, 7975, 7976, 7977, 7992, 8485, 8490, 8491, 8837, 8840, 8841 and 8849. - Changes were made to the PXE code for the 22P7801, 26K4842, 31P6301, 31P6401, 39R8624, 39Y6079, 39Y6088, 39Y6093, 39Y6098, 39Y9306, 39Y9310, 42C1600, 42C1632, 73P3501, 73P4001, 73P4101, 73P4201 and 73P9030.
package version 1.1.0 (See brcm_fw_nic_1.1.0-nx-nx2-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the Boot Code for the 1913, 1914, 4347, 6218, 6223, 6225, 6227, 6228, 7969, 7971, 7972, 7978, 7979, 7985, 7995, 8486, 8648, 8853, 8877, 9228 and 9229. - Changes were made to the ASF code for 6218, 6223, 6225, 6227, 6228, 8648, 9228 and 9229. - Changes were made to the PXE code for the 39Y6066. - Changes were made to the
Enhancements: - Added support for the 1879, 1880, 1883, 1884, 1887, 1913, 22P7801, 31P6301, 31P6401, 39Y9306, 39Y6066, 39Y6079, 39Y6088, 39Y6093, 39Y6098, 39Y9310, 4348, 4366, 7362, 7364, 7365, 73P3501, 73P4001, 73P4101, 73P4201, 7992, 7995, 8488 and 9230.
package version 1.0.0 (See brcm_fw_nic_1.0.0-nx-nx2-chg_anyos_anycpu.zip for details.) Problems Fixed: - Changes were made to the boot code for the 8832, 1914, 7971, 7972, 7978, 7979 7985, 8853 and 8877. - Changes were made to the UMP (Universal Management Port) code for the 7971, 7972 and 8853. brcm_fw_nic_2_1_8d_windows_32-64_chg
Broadcom (R) NetXtreme II (TM) Ethernet Software CD for IBM eServer BladeCenter and System x NetXtreme II Gigabit and 10 Gigabit Ethernet products
RELEASE 7.0.11.0
(03/29/2012)
Support Overview ================
This is the drivers software release for all IBM eServer BladeCenter and System x Broadcom-based NetXtreme II Ethernet products, including both on-board Ethernet and adapter options.
The supported Broadcom (R) NetXtreme II (TM) chipsets include BCM5706, BCM5708, BCM5709, BCM57710, BCM57711 and BCM57712.
The supported adapter options include:
39Y6066 - NetXtreme II 1000 Express Ethernet Adapter
42C1780 - NetXtreme II 1000 Express Dual Port Ethernet Adapter
42C1790 - NetXtreme II 10 GigE Express Fiber SR Adapter
44W4479 - 2/4 Port Ethernet Expansion Card CFFh for IBM BladeCenter
44W4465 - 2/4 Port 10Gb Ethernet Expansion Card CFFh for IBM BladeCenter
All Microsoft Windows device drivers are digitally signed.
WARNING:
Any x3850M2/x3950M2 server is required to be updated to at least Version 1.05 (Build A3E145A) system BIOS, or later, prior to any device driver software update.
Disclaimer ========== - FCoE: Broadcom only officially supports the FCoE and DCB feature set on adapters that are licensed for FCoE, and for which EMC e-Labs certification is already complete or in progress. Broadcom will *not* provide field support for unqualified platforms. Please refer to the EMC e-Labs certification matrix for existing support matrix postings, or contact your Broadcom liaison to inquire about configurations currently in the qualification queue for eventual support. Exercising either FCoE or DCB on an unsupported platform may lead to unpredictable results.
Caveats ======= - Windows 2003 support was discontinued as of the T7.0 program. - preventing driver install in W2K3 environment - preventing enumeration of iSCSI HBA in W2K3 environment - F6 kit is removed (no iSCSI boot over L4 path into W2K3)
Prerequisite ============ - For FCoE evaluation, 57712A1+8727C NIC adapters with valid FCoE license - For FCoE, NVRAM flag 105 must be enabled for DCB/DCBX - DCB/DCBX is required for FCoE - In order to enable FCoE, only the new 'MFW' firmware image can be used. Please use the eDiag supplied in this kit and upgrade the legacy boot code (and NCSI) to the new 'MFW' image
Package NOTES:
(1) When updating drivers via UXSPi, the utility will prompt version number(s) of drivers loaded on system that are pertinent to the Operating System being updated. After the utility completes and drivers are updated, there may be some driver version(s) where the New Version does not match the Installed Version. This may be because the adapter corresponding to the driver is not installed. Adapters must be installed to gain proper version numbers from the utility. Please disregard version numbers that do not pertain to the adapter(s) you have installed.
(2) When extracting files from this package, Windows 2008 R2 extract to floppy may not work. This is due to change in Windows security settings, and may become a limitation.
Known problems: ===============
PQA Testing Information ======================= - SW: -> FCoE validation focused on W2K8-SP2 and W2K8-R2 -> FCoE boot support only under Windows. - HW: -> External PHY Firmware versions for 10G Devices - 8727 : v4.06 - 8073 : v2.09 - Solarflare: v2.00
Notables ======== - 10G MBA driver release no longer supports RPL protocol. All files with xMMBA.NIC and xMMBA.LOM are removed - No TOE offload in conjunction w/ BASP in HyperV (see KB968703) - BASP w/ RSS enable can support a maximum of up to 4 processors - Broadcom does not recommend nor support enabling (manually) TCP Chimney Offload in Guest Operating Systems (GOS)running in Hyper-V on Windows Server 2008 R2
Version history between CD T7.0.4.4 release and previous CD T6.2.4.1 release: ================================================================================
Software CD T7.0.4.4 Previous CD T6.2.4.1 Version Version
Software Compatibility: - BCM5706 NetXtreme II Gigabit Ethernet Adapter - BCM5706S NetXtreme II Gigabit Ethernet Adapter - BCM5708 NetXtreme II Gigabit Ethernet Adapter - BCM5708S NetXtreme II Gigabit Ethernet Adapter - BCM5709 NetXtreme II Gigabit Ethernet Adapter - BCM5709S NetXtreme II Gigabit Ethernet Adapter - BCM57710 NetXtreme II 10 Gigabit Ethernet Adapter - BCM57711 NetXtreme II 10 Gigabit Ethernet Adapter - BCM57712 NetXtreme II Gigabit Ethernet Adapter
Key Fixes & Enhancements with this T7.0.4.4 sw CD release include: ===================================================================
- BSOD with BASP when IPV6 runt packet is found in buffer - Provide the ability of BASP to fix the BASP MAC address - 1g/10g Mezzanine cards lose TOE capability when BOFM MAC address is applied to card - 10g Windows driver - Fixed race condition that could occur during driver update. - 10g Windows driver - Fixed problem where a system reboot could occur if one port of a dual port device was being enabled/disabled while heavy traffic is running on the other. - 10g Windows driver - Fixed inability to wake system via magic packet when Locally Administered MAC address was assigned.
Feature Additions: ================== - Non-switch dependent NIC Partitioning support added to all components for 57712 based mezzanine cards. - BOFM support added for NIC Partitioned devices
NOTES:
(1) When updating drivers via UXSPi, the utility will prompt version number(s) of drivers loaded on system that are pertinent to the Operating System being updated. After the utility completes and drivers are updated, there may be some driver version(s) where the New Version does not match the Installed Version. This may be because the adapter corresponding to the driver is not installed. Adapters must be installed to gain proper version numbers from the utility. Please disregard version numbers that do not pertain to the adapter(s) you have installed.
(2) When extracting files from this package, Windows 2008 R2 extract to floppy may not work. This is due to change in Windows security settings, and may become a limitation.
*******Currently known issues and limitations with Broadcom NetXtreme drivers and devices. ********
1. BASP (the Broadcom Advanced Server Program) will appear to be bound to all adapters in the system once loaded. This binding is normal and is used only to determine compatibility with BASP. The binding is not active, as indicated by the gray background of the selection box. This pre-binding will not interfere with bindings to other software protocols.
2. The NetXtreme II drivers have two parts, the VBD driver and the NDIS Client driver. This combination of drivers can be used for WinPE installations as long as the WinPE image is built with the /PnP option. WinPE images that are booted with the -miniNT option will only load the NDIS driver so NetXtreme II network devices will not be functional in this environment. Use the -winpe option instead of the -minint option to boot WinPE when using NetXtreme II devices or use the special RIS driver contained in the distribution package in the NX2_RIS_Driver directory of the unpacked files.
3. Specifying network settings for NetXtreme II devices using the Microsoft unattended answer file does not work using the PCI Bus/Device/Function designation to specify adapters. This is due to the NDIS personality of the NetXtreme II device being a virtual device which means it does not have a physical Bus/Device/Function address. MAC address designation does work and may be used in conjunction with Bus/Device/Function for a complete solution. A program called netset.exe from Microsoft, available in the Windows 2000 Server Resource Kit, can also be used to apply network settings after the unattended install. Netset.exe uses the answer file to apply the network settings specified to the adapters in the system. See Microsoft Knowledge Base article 268781 for more information on netset.exe.
4. The first time diagnostics are run in a Windows environment on NetXtreme II devices, the diagnostic driver must be installed. Windows will either automatically install the driver, in which case, no action is required by the user, or Windows will ask to be directed to the INF file for the diagnostic driver. If you are prompted to install the driver, please direct the Windows dialog to search for the driver in the directory where the Broadcom driver package was unzipped. You may also search your hard drive for the file “bxdiag.inf.”
5. When loading drivers through the PNP (Plug and Play) method, users can occasionally end up loading the RIS drivers accidentally. Generally this occurs when a user is asked to point to the proper driver for the device, and the user selects the folder containing the RIS drivers as the driver for the device. This can result in network connections that fail to communicate across the network, as the NDIS driver will fail to bind to the devices. The most obvious way to identify the problem scenario is to open BACS and look at the network adapters displayed. Adapters that have the RIS drivers installed will be grayed out. Observing the driver loaded for the System Device portion of the Broadcom NetXtreme II devices will show that the RIS driver is loaded. Additionally, attempts to load the drivers using the installer will result in NDIS drivers displaying a yellow bang, as they’re not able to bind to the VBD driver. The easiest way to correct the problem is to run add/remove programs on all installed Broadcom devices, and then re-run the installer.
6. Windows Pre-installation Environment (WinPE for short) does not contain native support for 5708, 5709, 5716, 57710 and 57711 devices on operating systems prior to Windows Server 2008 R2. In order to “inject” driver support into Windows PE, refer to the steps provided by Microsoft at: http://support.microsoft.com/kb/923834/en-us. Broadcom 5708 Network Controller support is available as a native driver package in the Windows Server 2008 OS.
7. Network Teaming limitation with iSCSI offload: When iSCSI offload is enabled on Broadcom NetXtreme II NIC's or LOM's, only SLB teaming mode is supported. In order to create other teaming modes like 802.3ad and FEC/GEC, you will need to disable iSCSI offload. You can disable the iSCSI offload by a. launching the Broadcom Advanced Control Suite 3 (BACS 3). b. select the adapter you want to add to the team c. click the configurations tab, extend resource reservations. d. Uncheck iSCSI resource.
8. When iSCSI devices are installed on Windows Server 2003 or Server 2008, they will have the same friendlyname. View devices "by connections" in BACS3 on for managing iSCSI devices.
9. Restoring the team configuration with static IPv6 addresses may fail. Use either DHCP addresses for team configuration, or restore the team and re-apply the IP address manually if this issue is encountered.
10. When working in BACS while being logged into W2K3 x86 with a non-administrator account, the same icon that is used for a non-teamed adapter is being displayed for a teamed adapter. This is due to the fact the non-admin account cannot query the driver due to insufficient privileges.
11. Windows Server 2008 R2 is expected to support the ability to utilize the TCP Offload Engine (TOE) on child partitions for supported Guest operating systems. However, the stack supporting this feature was not fully matured upon the completion of this Windows drivers release. As a result, we do not recommend enabling this capability with these drivers until an update to resolve these issues are released. This is now understood to be a third-party issue.
12. After upgrading to this version of the software in W2K8 we have noticed that during a team restore in BACS3 that not all of the IPv4 addresses for VLANS are restored properly. This may require that the team be recreated and saved.
13. Remote install of Windows Server 2008 R2 over non-offload path (MSFT stack) with new Broadcom adapters, e.g. 57711, which are not supported by the inbox driver will fail. The problem is due to a conflict between the inbox (boot.wim) driver not able to support the new adapters. Although the installer provides a newer driver externally during the installation, the OS reverts back to the inbox. Please refer to the workaround provided through the following link:http://attachments.wetpaintserv.us/JA9hJcVpHrEi11mJ19vYVg%3D%3D23856.
Alternatively, Microsoft’s proposed solution is to build a custom install DVD by extracting the boot.wim and overwrite the .INF and .SYS files with Broadcom’s newer driver set. Please read Microsoft’s WAIK documentation for instruction process.
Note: Remote install of Windows Server 2008 R2 over Broadcom iSCSI Offload path does not have an issue.
14. Flow control statistics (MAC Sent X-ON, MAC Sent X-OFF and MAC Rx w/ no Pause Command) are reported incorrectly within BACS for 57710 based adapters. There is no functional impact and device is working as expected.
15. Receive Side Scaling (RSS) on TCP offloaded connections require a minimum of 8 gigabytes of RAM and only works for the 64-bit version of Windows Server 2008 and Windows Server 2008 R2. This feature is not supported in Windows Server 2003 due to a limitation in this operating system. RSS on non-offloaded connections, however, is supported for Windows 2003 SP2 and later.
16. WoL with NPar: When using Wake on LAN (WoL) with NIC Partitioning, all of the devices that comprise a port must be shut down to cause the WoL configuration to be written to the controller during operating system shutdown. If only a single function is shut down, the WoL configuration might not be written to the controller, and the controller might not wake.
17. Editing BASP teams: There is a known problem where editing a BASP team in BACS can sometimes cause a failover to occur on another team. This is currently believed to be a Microsoft issue, and Broadcom is pursuing a fix or workaround.
18. NC-SI with IOMMU: There is a known problem using NC-SI with IOMMU enabled, that can cause link down/up under stress conditions. If this occurs, disabled IOMMU in the BIOS.
brcm_dd_nic_7_0_11_0_win2k8_32-64_chg
Change History
Drivers Software Release for eServer System x Intel-based Fast Gigabit and 10 Gigabit Ethernet products
Version v16.8
Change History and Driver Versions Details ==========================================
Drivers Family Driver Name 16.8 Previous 16.4 Comments ============== =========== ====== ============== ========
This v16.8 sw release replaces all previous sw releases for IBM eServer System x Intel-based Gigabit and 10 Gigabit Ethernet Adapters.
The key updates with this v16.8 software release include: =========================================================
1) - Jumbo Frame Support for the Intel® 82583V Gigabit Network Connection
intc_dd_nic_16_8_2-b_windows_32-64_chg
IBM HBA/LSI 6Gb SAS/SATA/SSD Driver for Windows
Supported Controllers: ServeRAID H1110 SAS/SATA Controller for IBM System x (81Y4492) IBM 6Gb SAS HBA (46M0907) IBM 6Gb SSD HBA (68Y7362)
NOTE TO SERVICE - Reference RETAIN #N/A
Version 2.00.45.00 - Suggested ------------------ Ehancement(s): - Add support for ServeRAID H1110 SAS/SATA Controller for IBM System x - Add conversion of sense data descriptor format to fixed format, so drives 2.1TB in size and greater can return descriptor format sense data. For these drives to work properly under Windows, the miniport needs to convert the descriptor format sense data to fixed format before returning the sense data up the stack.
Fixes: - Add check for sense data type (fixed vs. descriptor) in CheckSmartInfo where large physical drives 2TB in size and greater use the descriptor format for sense data in order to pass back 64-bit LBA addresses. Most drives use the fixed format sense data, is the only format the upper layers of the Windows stack supports
Version 2.00.17.30 - Initial release ------------------ ibm_dd_mpt2sas_2_00_45_windows_32-64_chg
IBM HBA 6Gb Controllers BIOS/FW/UEFI Update
Controllers Supported: IBM 6Gb SAS HBA (46M0907) IBM 6Gb SSD HBA (68Y7362) IBM 6Gb Performance Optimized HBA (46M0912)
NOTE TO SERVICE - Reference RETAIN #N/A
Version 1.10.04 - Suggested ------------- Contains: Controller BIOS Firmware UEFI Driver IBM 6Gb SAS HBA 7.19.00.00 10.00.08.00 7.18.04.02 IBM 6Gb SSD HBA 7.19.00.00 10.00.08.00 7.18.04.02 IBM 6Gb Performance Optimized HBA 7.19.00.00 10.00.08.00 7.18.04.02
- Fixed issue where simple swap configurations with the drives on port 0 will show as bay 4 to 7 and drives on port 1 will show as bay 1 to 3. - Fixed issue where the Build Device Path call to RAID Extended SCSI PassThru Protocol allocates less memory to hold the SAS Device Path + End Device Path casuing a uEFI system hang.
Version 1.10.03 - Suggested ------------- Contains: Controller BIOS Firmware UEFI Driver IBM 6Gb SAS HBA 7.19.00.00 10.00.08.00 7.18.04.01 IBM 6Gb SSD HBA 7.19.00.00 10.00.08.00 7.18.04.01 IBM 6Gb Performance Optimized HBA 7.19.00.00 10.00.08.00 7.18.04.01
- Fixed an issue when a hard drive is removed from a RAID10 an existing drive may go offline. - Change the behavior of the LBPWS bit on the logical block provisioning VPD page for SATA drives. - Fixed issue where the SATL's inquiry VPD page 0 does not show support for block limits and logical block provisioning pages.
Note: HII changes may not affect all controllers. Changes for the controller are based on RAID volume support. - HII fix to return EFI_SUCCESS when RETRIEVE Action is given in HII Callback function - HII fix for Write cache disabling fails for SATA HDD/SSD connected to the IT controller. - HII fix for saved Controller Events Filename. - Behvioral change for the way a volume is created in HII. - HII change to Remove Legacy BIOS Enable/Disable option. - Fixed issue where after creating a volume using SATA SSD the Associated Physical Disks always show up as SATA HDD. - Fixed issue where a hotspare could not be created for any volume in the HII browser. - HII fix for the View Physical Disk Properties form where the Serial number of SATA disks were being displaced with a space. - HII fix for the IR help strings displayed when using an IT controller. - Fixed HII issue where a 'Question value mismatch with Option value' error occurs when saying No for creating RAID10/RAID1E volume. - Fixed HII issue where help is not available when having only RAID0 and RAID1 levels in Create Configuration form. - Fixed a problem where the UEFI driver ATA PassThru Protocol is corrupt while trying to access the Mode field. - HII behavior change for 'Manage Foreign Configurations.' - HII change to provide proper extended RAID Levels in help messages based on supported extended RAID Levels.
Note: The following fixes only effect blade systems that support Bofm. - Fixed boot issues in Windows 2008 where after installation in uEFI the os will not boot due to the BuildDevicePath not allocating enough memory for the DevicePathreturned to caller. - Fixed issue with Bofm configurations where the BOFM supplied addresses for external/switch attach Phys are being assigned to the internal/direct attach Phys. - Fixed a Bofm issue where the SAS WWIDs not reverting to Man Page 5 Default when a Blade is moved back to non-BOFM slot.
Version 1.10.01 - Suggested ------------- Contains: Controller BIOS Firmware UEFI Driver IBM 6Gb SAS HBA 7.19.00.00 10.00.05.00 7.18.01.05 IBM 6Gb SSD HBA 7.19.00.00 10.00.05.00 7.18.01.05 IBM 6Gb Performance Optimized HBA 7.19.00.00 10.00.05.00 7.18.01.05
Enhancements: - Add support for SATA 6GB drives greater then 2.1TB
Fix: - Fixed numerous hang conditions in HII configurator. - Fixed an issue where RAID1 volume turns to failed state after swapping the primary and secondary drives with each other with hot spares present. - Fixed an issue where Multiple simultaneous drive pulls can lead to an adapter reset. - Fixed an issue where Repeated pulls/re-inserts of physical disk may cause 8109 fault. - Fixed an issue where Roaming of > 2TB SATA volume drives from SAS1 to SAS2 cards, shows the volume drives as bare drives. - Fixed an issue where Activating a foreign volume results in 0x830A fault, if a native FAILED volume with no drive exists. - Fixed isuse where: Resync operation for RAID10 volume stalls at 13% complete. - Fixed a fault condition where a fault 8209 (IFAULT_IR_PD_ELM_NOT_FOUND) may occur when deletinga missing hot spare. - Fixed issiue where a SAS Topology Change List Event may return incorrect NumPhys data - Fixed where a controller sending HOLD after SATA device R_ERR of host to device FIS. - Fixed an issue where 6700 Fault ocurrs after getting a SATA overrun. - Fixed an issue where Disabling one phy causes another phy to be reset. - Fixed an issue where INVALID_STATE reply to SCSI IO Unit Control request to remove a device. - Fixed a Fault 1901 running cable breaker with SATA drivers. - Fixed an issue where a DATA_UNDERRUN (0x0045) IOC status is replied during disk IO. - Fixed a firmware issue where a 8111h fault occurs while activating a foreign volume on an adapter which already has failed volume with all the physical disks missing - Fixed an issue where a SATA: NCQ read command is not completed after a data underrun or overrun. - Fixed a problem when an Update to handle large out of range max host credit setting in manufacturing page 9. - Fixed a Fault 7C35 seen during READ DMA passthrough commands to SATA Drive - Fixed where a SATA: Read command completes with good status after data overrun - Fixed a nissue where the View Volume screen needs more than one ESC key press to exit screen if user has entered Manage HS screen at least once. - Fixed an issue where the Verify command in BIOS CU continues for a drive that is pulled out. - Fixed a BIOS issue where the Config page error is seen when changing enclosures in Controller BIOS. - Fixed an issue in CTRL-C where the BIOS is not checking valid bit in fixed format sense data. - Fixed an issue where the BIOS hangs or asserts NMI and reboots while parsing the SMBIOS entries of some servers. - Fixed an issue where the BIOS CU "Format" and "Verify" fails with some HDDs. - Fixed an issue hwere the SAS2BIOS: CU - SAS Topology screen has hightlight defects when PgDown is used. - Fixed the issue When a IO Adress is not assigned for SAS2 adapter, incorrect Fault is displayed. - Fixed an issue when an Attempt to expand the enclosure in a large topology results in display lag on SAS Topology screen. - Fixed an issue where the Display is irregular while scrolling up/down after selecting SATA-SSD drive as Prferred/Alternate boot device.
Version 1.08.01 - Suggested ------------- Contains: Controller BIOS Firmware UEFI Driver IBM 6Gb SAS HBA 7.05.06.00 5.30.03.00 6.00.15.11 IBM 6Gb SSD HBA 7.05.06.00 5.30.03.00 6.00.15.11
Fix: - Addressed problem with event replay code where the enclosurehandle was not being set causing some RHEL 4 device drivers difficultly when looking a the topology.
Version 1.07 - Suggested ------------- Contains: Controller BIOS Firmware UEFI Driver IBM 6Gb SAS HBA 7.05.06.00 5.30.02.00 6.00.15.11 IBM 6Gb SSD HBA 7.05.06.00 5.30.02.00 6.00.15.11
Fix: - Fixed issue where some System X servers will log a NMI and PCI error.
Version 1.06a ------------- Contains: Controller BIOS Firmware UEFI Driver IBM 6Gb SAS HBA 7.05.06.00 5.30.01.00 6.00.15.11 IBM 6Gb SSD HBA 7.05.06.00 5.30.01.00 6.00.15.11
ServeRAID M and MR10 Series SAS Controller Driver for Windows Server 2003/2008/2008 R2 (also supports MegaRAID 8480 SAS Controller)
Adapters Supported: ServeRAID M5115 SAS/SATA Controller for IBM Flex System (90Y4390) ServeRAID M5110 SAS/SATA Controller for IBM System x (81Y4481) ServeRAID M5110e SAS/SATA Controller for IBM System x ServeRAID M5120 SAS/SATA Controller for IBM System x (81Y4478) ServeRAID M5016 SAS/SATA Controller (90Y4304) ServeRAID M5015 SAS/SATA Controller (46M0829) ServeRAID M5014 SAS/SATA Controller (46M0916) ServeRAID M5025 SAS/SATA Controller (46M0830) ServeRAID M1015 SAS/SATA Controller (46M0831) IBM ServeRAID-MR10ie (CIOv) SAS Controller for BladeCenter (46C7167) IBM ServeRAID MR10is SAS Controller (44E8695) IBM ServeRAID MR10il SAS Controller (44E8767) IBM ServeRAID MR10M SAS Controller (43W4339) IBM ServeRAID MR10i SAS Controller (43W4296) IBM ServeRAID MR10k SAS Controller (43W4280) MegaRAID 8480 SAS Controller (39R8850)
NOTE TO SERVICE - Reference RETAIN #TIP H204972
Version 5.2.127 - Suggested --------------- Fixes - Fixed an issue while updating Win2k8x32 driver the user will get the following error "This device can not start (Code 10)." message - Fixed an issue where MSM 12.01.03.00 alerts are not giving proper windows version. - Fixed an issue where the driver was setting the region lock type even when firmware informs driver to bypass lock. - Fixed Sequential Write performance - Fixed an issue where I/Os stop sporadically with outstanding I/Os. - Changed the behavior of the driver to not send srb flush down by default; it manually checks the inf file for the device ids or on a system with these devices. - Fixed an issue where Windows LSI Driver megasas2.sys has inconsistent File version.
Version 5.2.112 - Suggested --------------- Fixes - Addressed Event 11 error in Windows system event log in Multipath configuration with Windows 2003. - Fixed issue where an Event 11 error will log in the Windows 2008 system event log during a warm or cold reboot. (RETAIN TIP H204972) - Fixed BSOD, RQ_LESS_THAN_OR_EQUAL, which can during heavy IO in large RAID 6 configurations.
Version 5.2.103 - Suggested -------------- Enhancements - Added support for ServeRAID M5016 - Added support for Windows 2008 R2 SP1
Fixes - LSI Channel fixes
Version 4.36.0 - Non-critical -------------- Fixes - Fixed issue where Windows 2003/2008 will blue screen during heavy periods of I/O - Fixed issue where a yellow bang will occur in Windows device manager when using the EXP2512/2524
Version 4.35.0 - Non-critical -------------- Enhancements - Enhancement for online controller reset support for 1078 (ServeRAID MR10x) controllers
Fixes - Fix issue where the application-DeviceIoctl would request sense IO, and device would generate sense information, which would get transferred to a wrong address. - Fixed issue where some servers will hang on shutdown of Windows due to Power SRB handling - Fixed verification at 0xC4 with verifier handling violation due to mmMIOspace call from miniport driver. - Fixed iMR performance problem with multiple virtual drives by allowing the driver to send SCSI status as task full. - Fix order IO coalescing.
Version 4.32a - Non-critical -------------- - Fixed issue with "Extract to Hard Drive" option
Version 4.32.0 - Non-critical -------------- - Fixed issue on Windows 2003 where after shutdown the user will see unexpected shutdown message in the next reboot due to driver not unregistering CPX interface. - Fixed issue where the ServeRAID M1015 will hang when performing OCR with IO with a degraded RAID 1 or rebuilding RAID 1 array. - Fixed issue where the ServeRAID M1015 will hang when performing OCR with IO on RAID 1 and RAID 5 arrays. - Fixed issue where BSOD error occurs, “DRIVER_POWER_STATE_FAILURE STOP: 9F,” during Windows 2008-R2 installation and before first reboot.
Version 4.24.0 - Non-critical -------------- Enhancements - Added support for ServeRAID M5025.
Fixes - Fixed issue with Event ID 51 messages - Fixed issue where the Operating System hangs during reboot after stopping IO and clearing config. - Fixed issue with command Timeout to driver. - Fixed issue where the file system view shown as 'RAW' instead of 'NTFS/FAT' - Fixed issue where an adapter reset would cause a BSOD
Version 4.17.2 - Non-critical -------------- - Added support for ServeRAID M1015. - Implemented some performance enhancements to support ServeRAID M1015 controller. - Fixed an issue where the system could hang when a virtual disk is deleted or a configuration is cleared during heavy I/O.
Version 4.13 - Non-critical ------------ - Added logic to support next-gen SAS2 controllers. - Added support for the ServeRAID M5015 and M5014 SAS/SATA controllers.
Version 3.9 - Suggested ----------- - Added support for the IBM ServeRAID MR10ie (CIOv) SAS controller. - Added support for MSI (Message Signaled Interrupts) to the Windows Server 2008 driver. - Fixed an issue that could cause a system freeze when a system shutdown is initiated while the system is under heavy I/O stress.
Version 2.23 - Suggested ------------ - Added support for the IBM ServeRAID MR10is SAS controller. - Fixed an issue where, after a firmware hang, the driver would completely halt the firmware, resulting in the rejection of all additional commands. - Fixed an issue where the OS on the first controller would become unstable after the second controller encounters a double bit ECC error. - Changed the signing process to ensure that the digital signature would not expire.
Version 2.20 - Suggested ------------ - Added support for the IBM ServeRAID MR10il SAS controller. - Added support for Windows Server 2008. - Implemented several changes to prevent ISR calls at certain times. - Fixed a text issue in the INF file. - Fixed an issue where S3 Standby would delay and sometimes fail during resume from Sleep state.
Version 2.17 - Suggested ------------ - Added support the IBM ServeRAID MR10i, MR10k, and MR10M SAS controllers.
Version 1.24 - Suggested ------------ - Forced the PnP Manager to rescan the bus once "Dead Adapter" is set. This prevents a manual rescan, as well as preventing I/O retries which fill up the event log. - Modified the driver so that it will no longer allow any commands to go to the firmware once the restart timer is on.
Version 1.23 - Suggested ------------ - Implemented EnableDma64BitAddresses argument, which allows the driver to support 64-bit DMA addressing regardless of whether the system supports 64-bit addressing. - Fixed an issue where the driver was not updating the dataTransferLength value, which caused miscompares between the dataTransferLength value returned by the driver and the value returned by the firmware.
Version 1.21 ------------ - Initial release ibm_dd_sraidmr_5_2_127_windows_32-64_chg
ServeRAID M5100 Series SAS/SATA Controller Firmware Update for Windows
Adapters Supported: ServeRAID M5110 SAS/SATA Controller for IBM System x (81Y4481) ServeRAID M5110e SAS/SATA Controller for IBM System x ServeRAID M5120 SAS/SATA Controller for IBM System x (81Y4478)
NOTE TO SERVICE - Reference RETAIN #N/A
Version 23.7.0-0029 - Suggested ------------------- Enhancements: - Added support for Cache Cade 2.1 - Added Support for PI Drives
Fixes
- Fixed an issue where the firmware reports device initialization completion status to be greater than 100% at startup. - Fix an issue where when a secure foreign drive was present, VD creation fails because firmware becomes unresponsive - Added a check for the presence of PD before writing the data arms of a protected LD during BGI. - Fixed Firmware asserts in CacheMemAllocForPrebootApps() when memory was allocated twice by BIOS. - Fixed an issue with USB Cacheoffload restore fails after multiple power cycles on ServeRAID M51xx controllers. - Fixed an issue where querying SMART / PFA Status returns "all zeros" in Sense Data. - Fixed an issue where the import of a config from MR to iMR resulted in a firmware crash. - Fixed an issue where iMR firmware crashed while creating 8/16/32 KB stripe size Lds. - Fixed background initialization watermark conversion to PD LBA. - Fixed write protected R1E data arms during initialization. - Fixed an issue where MR firmware crashed while discarding pinned cache. - Fixed an issue where a dirty LD dependency information of SSD pd has stale entries. - Corrected an issue during system booting from pinned cache, firmware goes to loop message BootMsgDcmd - Fixed an issue where a BGI was aborted and restarted, elapsed time was not reset. - Fixed an issue where the start ref for a shared cache line was not an indicator of the offset into the stripe. - Fixed an issue where the firmware hangs while running CC on a rebuilt R1 VD with SBBM. - Fixed an issue where the firmware was wrongly adding puncture entries. - Fixed an issue where rebuild was ran twice on a target drive with 100% full SBBM table. - Fixed an issue where the firmware was generating powersave change event when DS3 was not enabled, due to this application are not parsing the event. - Fixed an issue where recon from R0 to R1 using 3 TB drive causes firmware to report excessive unexpected sense events. - Fixed an issue, in which the bbuMode would revert to the factory default value of 5, when automatic learn cycle was enabled. - Fixed an issue where cache offload firmware reports unnecessary High Temp Event due to incorrect temp value. - Fixed an issue in which a Patrol Read may not start under certain conditions. - Fixed an issue where the firmware hits montask after discarding the cache when a snapshot VD was involved. - Fixed an issue where the firmware hangs during pin cache destage as dirty lines in that map never become zero. - Fixed an issue where CC fails to correct media error at 2TB location on 2 3TB SATA drives that support WU. - Fixed an issue where a new XML file was added to the nvdata, the buffer to hold the uncompressed nvdata overflowed. - Fixed an issue where an imported drive becomes unconfigured good when secure VD erase was running. - Fixed an issue where CC stops progressing on a R6 VD with media errors. - Fixed an issue where 3TB Hitachi HDD failed in immunity test (Electrostatic Noise test). - Fixed an issue where controller features are lost if RAID Key was not detected - Fixed an issue where performance degraded in RAID 5 Sequential Writes due to command Out-of Ordering. - Fixed an issue where "Native configuration is no longer supported" message in post. - Fixed an issue where (DDR3) Initialization fails with fault 0x91a1 - initial DFIRL selected too low. - Fixed an issue where subsequent drives are dropped when all drives in the stagger spin up drives fails on boot sequence.
Version 23.2.1-0043 - Suggested ------------------- Fixes: - Fixed an issue where "Potential non-optimal configuration due to drive PD commissioned as emergency spare" alarm would trigger erroneously. - Fixed an issue where Copyback does not progress upon inserting drives. - Fixed an issue When allowMixInLD is Disabled, and causes Copyback Fails after Rebuild to Emergency Hot Spare. - Fixed an issue where the Firmware faults while flashing. - Fixed an issure where querying SMART / PFA Status to Return all zeros in Sense Data. - Fixed an issue where the Re-inserted Drives becomes Unconfigured_good causing auto rebuilds to fail to start.
Version 23.2.1-0033 ------------------- - Initial release ibm_fw_sraidmr_m5100-23_7_0-0029_windows_32-64_chg
uEFI Flash Update Version 1.20 (BuildID VVE120C) Change History
Version 1.20 - BuildID: VVE120C ------------------------------------------------- Problem(s) Fixed: - Invalid slot usage state showed on RENAI Riser card. - Incorrect slot error event on JOJO Riser. - Fail to return to Boot menu if boot fail. - Further updates to the fatal error handler to report QPI errors during runtime. - iSCSI Attempt will disapper when system reboot several times. - F6 function key is malfunction. - Remove unnecessary information from ReadMe file. - Fails to report logging limit errors on spared DIMM. - FAN speed is pull up if TXT enabled in uEFI. - Fail on Windows 2012 TPM WHQL validation.
Enhancements: - Improve 2DPC@1333MHz detection algorithm. - Improve CPU detect algorithm. - Support 4GB PCI inventory access. - Support UDIMM 2DPC@1333MHz run on 1.35V by automatic. - Remove unnecessary warm reset to improve uEFI boot time.
Limitations: Dependencies:
Version 1.11 - BuildID: VVE116C ------------------------------------------------- Problem(s) Fixed: - Fail to install VMWare 5.0 if Intel TXT function is enabled.
Enhancements: Limitations: Dependencies:
Version 1.10 - BuildID: VVE116A ------------------------------------------------- Problem(s) Fixed: - Fixed issue to allow PXE/iSCSI to be configured out-of-band - Processor speed is incorrect when system is idle w/ E5-2637 M1. - Serial Console Redirection function can not work if SP Redirection is Disabled. - No Screen output by Serial Over Lan connection. - Fix Intel E5-2637 speed is incorrect. - DIMM slot 13-24 can NOT indicate which memory was falut. - Fix SMBios Type 4 External Clock information incorrect. - Fixed issue that caused the ASU tool to occasionally fail to update the Processors.CoresinCPUPackage value
Enhancements: - Improve PCIe error reporting. - Improve Fatal Error Handle. - Improve Legacy PXE function. - Remove Intel 130W CPU limitation. - Improve PCIe error reporting. - Support Heping riser card - Improve ME Update mechanism - Improve ACPI: C-States - Added support for using Features On Demand with Optimized Boot enabled - Updated thermal threshold values for DIMMs - Reduce boot time (reduce unnessary reset in POST).
Rev. 2.04.001 - Corrected the glitch during the Windows logo screen
KNOWN ISSUES ------------ - None
HISTORY ------- Rev. 2.03.003 - Added a tagFifo reset to get rid of the shift issue.
Rev. 2.03.002 - Added an unified installer that will call the right setup depending on the architecture.
Rev. 2.03.001 - Fixed the uninstaller issue.
Rev. 2.02.001 - Fixed the power management issue.
Rev. 2.01.007 - Fixed the .inf install issue caused by the PCI service.
Rev. 2.01.006 - Fixed the blinking cursor effect caused by the previous fix.
Rev. 2.01.005 - Set the good resolution list. - First draft of a fix for cursor corruption. - Reviewed PLL code.
Rev. 2.01.004 - Set the resolution list supported by the driver. - Gave access to the 16MB of Video memory. - Fixed an issue where reading DDC corrupted the display. - Fixed an issue where the driver was falling in an infinite loop under some circunstances. - Removed two deprecated calls made to VideoPort.
Rev. 2.01.003 - Uninstall isn't deleting all the string correctly, now it's working correctly.
Rev. 2.01.002 - Increased the stability of the optimized driver with some fixes.
Rev. 2.01.001 - First draft of the optimized driver
Rev. 2.00.05 - This is the second version of the G200eR2 driver (Rev B0).
Rev. 2.00.04 - This is the first version of the G200eR2 driver. mtrox_dd_video_2_04_001_winsrvr_32-64_chg