IBM(R) Tivoli(R) OMEGAMON(R) XE for DB2 PE/PM on z/OS Application 
Support Files Version 5 Release 3 Fix Pack 3 (V5.3.0 Fix Pack 3)

Licensed material - Property of IBM

© Copyright IBM Corporation 2005, 2016.
 
------------------------------------------------------------------------

CONTENTS

1  About this release
2  Installation, migration, upgrade, and configuration information
3  Service history
4  Support information
5  Notices and trademarks


=========================================================================
1.0 ABOUT THIS RELEASE
=========================================================================
Set the font to monospace to better view this file.

This is the README document for the OMEGAMON XE for DB2 PE/PM on z/OS 
Application Support Files maintenance update FIX PACK 3.

The following product application support files are included:

  IBM Tivoli OMEGAMON XE for DB2 PE/PM on z/OS V5.3.0
	

It includes the fixes for these APARs:

PI56502 - No DB2 locking conflict info in TEP and Enhanced 3270 UI after
          PTF UI34476, V5.3.0 Fix Pack 1.  "Application Support Mismatch"
          after PTF UI34476, V5.3.0 Fix Pack 1.

          "Application support mismatch" warning in TEP after
          installing from DVD image LCD7-5139-09.   

          This resolves PE'd PTF UI34476, which was built for PI50967
          and PI53149. 

PI50967 - The Java certificate used to sign the resource file expired.
          
PI53149 - DB2 subnodes not showing in Enhanced 3270 UI due to incorrect
          affinity version bits in KDP attributes.

PI42097 - Negative port number in Distributed Thread Detail workspace 
          in TEP.  This fixpack incorporates the ++HOLD functionality
          of PI42097's PTF.

PI41955 - This fixpack adds new IMS region type COTT that can be used
          in conjunction with PI41955's PTF.   

  
This release includes all maintenance since GA of IBM Tivoli 
OMEGAMON XE for DB2 PE/PM on z/OS V5.3.0. This release can be 
applied directly to the base V5.3.0 product release.


-------------------------------
1.1 Cross-Product compatibility
-------------------------------

-  If you are installing any of the application support files from
   this image into an environment running IBM Tivoli Monitoring (ITM) 
   V6.3.0, then ITM V6.3.0 Fix Pack 2 (6.3.0-TIV-ITM-FP0002) or 
   higher is required and ITM V6.3.0 Fix Pack 6 (6.3.0-TIV-ITM-FP0006)  
   is recommended.

-  IBM Tivoli Monitoring V6.3.0 can be obtained by ordering 
   either 5724-C04 IBM Tivoli Monitoring through Passport Advantage 
   or 5698-A79 IBM Tivoli Monitoring Services on z/OS through 
   ShopzSeries. 

-  You must upgrade your TEPS and Hub TEMS on a distributed platform 
   to the required level of ITM maintenance prior to installing the 
   OMEGAMON application support files with this image.

-  If you will be using Java version 8:

   - If your current ITM maintenance level is already V6.3.0 Fix Pack 6, 
     you can either modify the tep.jnlp file after application of this 
     fixpack or re-apply ITM V6.3.0 Fix Pack 6.  To modify tep.jnlp:
   
     - Remove the "extraneous" dashes in comments such as these:  
       <!-- Customization instructions --------------------------------------------- -->
       <!-- No instructions found ----- -->
       <!-- /Customization instructions -------------------------------------------- -->
    
       so they look like these: 
       <!-- Customization instructions -->
       <!-- No instructions found -->
       <!-- /Customization instructions -->        

     - If your current ITM maintenance level is not already V6.3.0 Fix Pack 6,
       you can apply ITM V6.3.0 Fix Pack 6 after you apply this fixpack.  

     - Additional information may be found in technote #1672459.  
       http://www.ibm.com/support/docview.wss?uid=swg21672459

-  If you have installed LCD7-5139-09 and see an "Application support mismatch" warning
   in TEP, this fixpack will resolve that issue.  However, if you are also using Java 8,
   you may need to modify tep.jnlp per the instructions immediately above, after applying 
   this fixpack.         
       

=========================================================================
2.0 INSTALLATION, MIGRATION, UPGRADE, AND CONFIGURATION INFORMATION
=========================================================================

--------------------------------------
2.1 Hardware and Software Requirements
--------------------------------------

- IBM Tivoli Monitoring (ITM) V6.3.0 Fix Pack 2 or higher and (ITM) V6.3.0 Fix
  Pack 6 is recommended.

- Installation of IBM Tivoli OMEGAMON XE for DB2 PE/PM on z/OS v5.3.0 
  requires PTF: UI35699   

- This maintenance update includes a renewed Java certificate (Valid from: 08/02/15
  07:00 PM until: 11/01/18 06:59 PM). If you have previously installed a
  language pack image, you must install the corresponding language pack
  image with the matching certificate. If you have not done so already, 
  you are recommended to install Tivoli Enterprise Portal Server at 
  IBM Tivoli Monitoring V6.3.0 Fixpack 6 or higher, which includes 
  the matching Java certificate for this component. 

- Refer to technote #1269613 to locate the current language pack image:
  http://www.ibm.com/support/docview.wss?uid=swg21269613

- Refer to technote #1290883 for a complete list of recommended maintenance 
  levels. http://www.ibm.com/support/docview.wss?uid=swg21290883 

-----------------------
2.2 Installation steps: 
-----------------------

- Before proceeding with the installation process, please make note of 
  these important points:

  - If using the ITMSuper tool, it is suggested that you run the tool 
    before installing the release to create a baseline snapshot of your 
    Tivoli Monitoring environment which can be used to compare against a 
    second ITMSuper snapshot collected after applying this release. The 
    baseline snapshot can be done by selecting the Topology, Connectivity, 
    and TEMS Servers tabs and saving the session. Information about the 
    ITMSuper tool can be found at the following URL:

    http://www.ibm.com/software/brandcatalog/ismlibrary/details?catalog.label=1TW10TM6L

  - It is recommended you make a record of the version, release, 
    maintenance and fixpack level of the existing install by running 
    the KinCInfo command on Windows systems or the cinfo command on 
    UNIX or Linux systems. After the installation of the maintenance 
    completes, this will help in validating the installation. 
    You can find instruction on cinfo/KinCInfo command in the 
    post-install step in this section. 

- Following these steps to install:

  a. Copy the maintenance update zip or tar file to the Tivoli Enterprise
     Monitoring Server(s) and Tivoli Enterprise Portal Server system(s).

  b. Extract the maintenance update zip or tar file, using a command 
     such as:

     On Windows systems: 
     - unzip -v 5.3.0-TIV-KD5-FP0003.zip
 
     On UNIX or Linux systems:
     - if the version of tar used supports z, then
       tar -zxvf 5.3.0-TIV-KD5-FP0003.tar.gz

     - if the version of tar used does not support z, then
       gunzip 5.3.0-TIV-KD5-FP0003.tar.gz
       tar -xvf 5.3.0-TIV-KD5-FP0003.tar

  c. As a best practice, it is recommended that Tivoli Enterprise Portal 
     Server and Tivoli Enterprise Monitoring Server running on the 
     distributed platform where this release is to be installed be 
     stopped manually prior to performing this installation. 
     While the distributed installer will attempt to stop all running 
     processes, there are times when a running process will fail to stop 
     and lead to unexpected upgrade failures if the upgrade is allowed to 
     continue. If any process fails to stop during a manual shutdown, 
     restart the system before proceeding with the upgrade.

  d. Start the distributed installer by using the following command from 
     within the install directory:

     On Windows systems: 
     - WINDOWS\setup.exe
 
     On UNIX or Linux systems:
     - ./install.sh

  e. Follow the on-screen installation instructions. Please make note
     of the following points during the post-installation configuration
     steps if you are adding application support to the TEMS.
	 
	 - If you are adding the application support files for 
	   products and this is the first time you have attempted 
	   installation of the application support files for this product,
	   select the "New" option which will add the default managed system 
	   groups to all applicable situations from the product support 
	   packages being seeded for the first time. Modifications are not 
	   made to managed system groups in previously upgraded product 
	   support packages. "New" is the default.
	 
	 - If you are updating the application support files for 
	   products which were previously installed (upgrade), select the 
	   "All" option which will add the default managed system groups 
	   to all applicable situations. "None" is the default.
		
- Post-installation, you can validate your installation by running the 
  KinCInfo command on Windows systems or the cinfo command on UNIX or 
  Linux systems and comparing the version information to that recorded
  prior to the installation. 

  On Windows systems: 
  - <INSTALL HOME>\installITM\KinCInfo -t dp
  
  On UNIX or Linux systems:  
  - <INSTALL HOME>/bin/cinfo -t dp

  Sample output for the KinCInfo command on Windows systems to list
  product components installed in the manager server and/or portal 
  server:

  <INSTALL HOME>\installITM\KinCInfo -t dp

  PC  APPLICATION SUPPORT DESC            PLAT   APP VER              
  DP  OMEGAMON XE for DB2 PE/PM on z/OS   WICMS  05.30.03.00
  DP  OMEGAMON XE for DB2 PE/PM on z/OS   WICNS  05.30.03.00
  DP  OMEGAMON XE for DB2 PE/PM on z/OS   WIXEB  05.30.03.00
  DP  OMEGAMON XE for DB2 PE/PM on z/OS   WIXEW  05.30.03.00

  Sample output for the cinfo command on Linux or UNIX systems to list
  product components installed in the manager server and/or portal 
  server:

  <INSTALL HOME>/bin/cinfo -t dp    

  PC   APPLICATION SUPPORT DESC            PLAT  APP VER              
  DP   OMEGAMON XE for DB2 PE/PM on z/OS   tms   05.30.03.00  
  DP   OMEGAMON XE for DB2 PE/PM on z/OS   tpd   05.30.03.00  
  DP   OMEGAMON XE for DB2 PE/PM on z/OS   tps   05.30.03.00  
  DP   OMEGAMON XE for DB2 PE/PM on z/OS   tpw   05.30.03.00  
     
------------------------------------------------
2.3 Known limitations, problems, and workarounds
------------------------------------------------

-  The following message will appear during the installation of the application
   support from this image into a TEMS running on a Linux or UNIX platform:
  
   KCIIN2463W Warning: This installation media does not contain any components 
   which can be run on the current system platform architecture. To install 
   components which can run on this system, please locate the installation 
   media containing files similar to <platform>.jar. If you are installing 
   application support, continue with the installation to see a list of support 
   files.

   This message can be ignored, as this image only contains application support
   files. Press enter to continue with the installation.

-  If you are using this fixpack to update the application support files for 
   products which were previously installed, you may receive the following 
   warning message: 
 
      WARNING - you are about to install the SAME version of 
      OMEGAMON XE for DB2 PE/PM V5.3.0 fp:nn.nn

      Do you want to install the SAME version [ y or n; "n" is default ]?

   If you have previously installed one of the releases listed in    
   section 3.0 SERVICE HISTORY, you should reply "y" to this message; 
   otherwise, this message is an indication that you have already applied
   a release which is at a later level of maintenance than is included in 
   this fixpack. 

-  You may see the following warning message when you are installing the 
   application support on a Linux or UNIX system:

     "KCIIN1421W WARNING - unable to copy eclipse agent plugin file 
     /products/itm/ls3263/cw/iehs/kxx/eclipse/plugins/com.ibm.kxx.doc"

   If you see this message, no action is required. Press Enter to continue.

-  During the install of IBM Tivoli OMEGAMON XE for DB2 PE/PM Application 
   Support Files for z/OS V5.3.0 into an environment running IBM Tivoli 
   Monitoring V6.3.0 on Windows, if the following installation error 
   message is received:  

     "Unable to copy a file to the drive where Program Files exists, 
      cannot continue." 

   Refer to the technote #1403443 for workaround details. 
   http://www.ibm.com/support/docview.wss?uid=swg21403443.

- If you are running your TEPS on Linux on System z and you use the manual 
  method to add application support to a non-local TEMS running on z/OS, 
  prior to installing the OMEGAMON XE application support files from this 
  fixpack, you should delete the OMEGAMON XE agent catalog (KDPCAT) and 
  attribute files (KDPATR) from the &rhilev.&rte.RKANDATV file  
  allocated to your non-local TEMS on z/OS.
  
  If you do not delete these files, you may encounter the following problem:  

  Problem Description:  When a TEPS is running on Linux on System z, if an 
  attempt to FTP the catalog (Kdp.cat) and attribute (Kdp.atr) files 
  from Manage Tivoli Enterprise Manage Services (MTEMS) fails, 
  review the itm_config.trc log for the following error messages:

  ITMinstall.ftptems.SupportFileList transferFiles       __ERROR__  
           (traceKey:1329933202902)
  sun.net.ftp.FtpProtocolException: PORT :503 EPSV ALL received 
           - PORT not allowed after EPSV ALL

  If you encounter this problem, the following workaround is recommended:
  Execute following command in logs directory:   	
             grep "PORT not allowed after EPSV ALL" itm_config*.trc
  If it returns following text:  	
             sun.net.ftp.FtpProtocolException: PORT :503 EPSV ALL received 
             - PORT not allowed after EPSV ALL
  then delete the selected catalog and attribute files from the non-local 
  TEMS running on z/OS and retry the file transfer, using Manage Tivoli 
  Enterprise Monitoring Server (MTEMS) or use another FTP client to replace 
  existing catalog and attribute files on z/OS.
  
- If you are using the TEP Webstart client you may see a pop-up dialog box
  during start-up indicating that the application's digital signature has 
  expired. If you click the "More Information..." link on the pop-up dialog
  box, the following message will be shown:
  
     "Although the application has a digital signature, the application's 
     associated file (JNLP) does not have one. A digital signature ensures
     that a file is from a vendor and that it has not been altered."

  This message can be safely ignored as the associated file (JNLP) 
  is intentionally unsigned. Click "Close" to close the "More Information"
  dialog box and then click "Run" to continue with the TEP Webstart client 
  start-up.
  

=========================================================================
3.0 SERVICE HISTORY
=========================================================================

This refreshed image supersedes prior maintenance updates:

- IBM Tivoli OMEGAMON XE for XE for DB2 PE/PM on z/OS V5.3.0 fix packs:
  5.3.0-TIV-KD5-FP0001

- IBM Tivoli OMEGAMON XE for DB2 Application Support Files for z/OS V5.3.0
  DVD Publication number LCD7-5139-nn, where nn is 00 - 09.


-----------------------
3.1 Product fix history
-----------------------
Some of the following APARs were closed with ++HOLD instructions for
updating LUW files.  This fixpack includes the updates for those LUW
files.

PI56502 - PE Resolver for UI34476 (the PTF for PI50967 and PI53149)

  Problem Summary: 
    No DB2 locking conflict data after 5.3.0-TIV-KD5-FP0001.
    "Application Support Mismatch" after 5.3.0-TIV-KD5-FP0001.

  Conclusion:
    Ensure DB2 locking conflict data is available to TEP.
    Ensure file is encoded with correct maintenance level. 


PI50967 - The Java certificate used to sign the resource file 
          expires April, 2016.		

  Problem Summary:
    The Java certificates used by the TEP browser and TEP webstart 
    clients will expire April 16, 2016.  You will start receiving an 
    expired Java certifcate warning unless you install application 
    support files that have been signed with the renewed Tivoli 
    Java certificate	  

  Conclusion:
    Renewed the Java certificate.  It will expire 11/1/2018. 

PI53149 - DB2 subnodes from agents prior to V530 are not showing in 
          Enhanced 3270 UI due to incorrect affinity version bits in KDP 
          attributes.
		
  Problem Summary:  
     The KPI attributes added to V530 have incorrect affinity
     version bits.
    
  Conclusion:
     Corrected the affinity version bits for KPI attributes.
    

PI42097 - Negative port number in Distributed Thread Detail workspace 
          in TEP.  This fixpack incorporates the ++HOLD functionality
          of PI42097.		

  Problem Summary:
          Port was erroneously treated as a signed value which caused 
          displaying a port larger than 32767 as a negative value.
   	  
  Conclusion:
          Display port as an unsigned value.


PI41955 - New IMS region type COTT		

  Problem Summary:
          IMS region type COTT needs to be added. 
   	  
  Conclusion:
          Add it.    

   
  
=========================================================================
4.0 SUPPORT INFORMATION
=========================================================================

If you have a problem with your IBM software, you want to resolve it
quickly. This section describes options for obtaining support for IBM
software products.

-------------------------------
4.1 Using IBM Support Assistant
-------------------------------

The IBM Support Assistant is a free, stand-alone application that you can
install on any workstation. You can then enhance the application by
installing product-specific plug-in modules for the IBM products you use.

The IBM Support Assistant saves you time searching product, support, and
educational resources. The IBM Support Assistant helps you gather support
information when you need to open a problem management record (PMR), 
which you can then use to track the problem.

The product-specific plug-in modules provide you with the following
resources:
- Support links
- Education links
- Ability to submit problem management reports

For more information, see the IBM Support Assistant Web site at: 
 
            http://www.ibm.com/software/support/isa

If your product does not use IBM Support Assistant, use the links to
support topics in your information center. In the navigation frame, check
the links for resources listed in the ibm.com and related resource
section where you can search the following resources:
- Support and assistance (includes search capability of IBM technotes
  and IBM downloads for interim fixes and workarounds)
- Training and certification
- IBM developerWorks
- IBM Redbooks
- General product information

If you cannot find the solution to your problem in the information
center, search the following internet resources for the latest
information that might help you resolve your problem:
- Forums and newsgroups
- Search engines

-----------------------
4.2 Obtaining Fixes
-----------------------

A product fix might be available to resolve your problem. To determine
what fixes are available for your IBM software product, follow these
steps:
- Go to the IBM Software Support Web site at
  http://www.ibm.com/software/support
- Under Find product support, click "All IBM Software (A-Z)". This opens
  the software product list.
- In the software product list, select the "Tivoli OMEGAMON XE" product
  which you are interested in, for example, "Tivoli OMEGAMON XE
  for Performance Expert on z/OS" listed under "T". This opens the IBM Tivoli OMEGAMON
  XE for Performance Expert on z/OS support site.
- You can also search for keywords or a specific APAR; for tips on
  refining your search, click "Search tips". Click the APAR abstract to
  read the description and optionally download the fix. 
- In the "Find downloads and drivers by product" section, select one
  software category from the "Category" list.
- Select one product from the "Sub-category" list.
- Type more search terms in the "Search within results" if you want to
  refine your search.
- Click "Search".
- From the list of downloads returned by your search, click the name of
  a fix to read the description of the fix and to optionally download
  the fix.

For more information about the types of fixes that are available, see the
IBM Software Support Handbook at

  http://techsupport.services.ibm.com/guides/handbook.html

------------------------------------
4.3 Receiving weekly support updates
------------------------------------

To receive weekly e-mail notifications about fixes and other software
support news, follow these steps: 

- Go to the IBM Software Support Web site at

    http://www.ibm.com/software/support. 

- Click "My notifications", under "Stay informed", on the side of the page. 
- If you have already registered for "My notifications", sign in and skip to
  the next step. If you have not registered, click "register now".
  Complete the registration form using your e-mail address as your
  IBM ID and click "Submit". 
- Click "Edit profile". 
- In the "Products" list, select "Software". A second list is displayed. 
- In the second list, select a product segment, for example,
  "Systems Management". A third list is displayed. 
- In the third list, select a product sub-segment, for example,
  "System Performance". A list of applicable products is displayed. 
- Select the products for which you want to receive updates, for example,
  IBM Tivoli OMEGAMON XE for Storage on z/OS. 
- Click Add products. 
- After selecting all products that are of interest to you, click
  Subscribe to email on the Edit profile tab. 
- Select Please send these documents by weekly email. 
- Update your e-mail address as needed. 
- In the Documents list, select Software. 
- Select the types of documents that you want to receive information
  about. 
- Click Update.

If you experience problems with the My support feature, you can obtain
help in one of the following ways: 

Online:
Send an e-mail message to erchelp@ca.ibm.com, describing your problem. 

By phone:
Call 1-800-IBM-4You (1-800-426-4968). 

-----------------------------------
4.4 Contacting IBM Software Support
-----------------------------------

For support for this or any IBM product, you can contact IBM Software 
Support in one of the following ways:

- Submit a problem management record (PMR) electronically at IBMSERV/IBMLINK.
- Submit a problem management record (PMR) electronically from the support 
  web site at:  http://www.ibm.com/software/sysmgmt/products/support/

You can also review the IBM Software Support Handbook, which is available on 
the web site listed above. An End of Support Matrix is provided that tells 
you when products you are using are nearing the end of support date for a
particular version or release.

When you contact IBM Software Support, be prepared to provide identification 
information for your company so that support personnel can readily assist you. 
Company identification information might also be needed to access various
online services available on the Web site.

The support Web site offers extensive information, including a guide to support 
services (the IBM Software Support Handbook); frequently asked questions (FAQs); 
and documentation for all products, including Release Notes, Redbooks, and 
Whitepapers. The documentation for some product releases is available in both 
PDF and HTML formats. Translated documents are also available for some product 
releases.

To contact IBM Software support, follow these steps:

- Determining the business impact

  When you report a problem to IBM, you are asked to supply a severity
  level. Therefore, you need to understand and assess the business
  impact of the problem that you are reporting. Use the following
  criteria: 

  Severity 1 
      The problem has a critical business impact. You are unable to use
      the program, resulting in a critical impact on operations. This
      condition requires an immediate solution. 

  Severity 2 
      The problem has a significant business impact. The program is
      usable, but it is severely limited. 

  Severity 3 
      The problem has some business impact. The program is usable, but
      less significant features (not critical to operations) are
      unavailable. 

  Severity 4 
      The problem has minimal business impact. The problem causes little
      impact on operations, or a reasonable circumvention to the problem
      was implemented. 
 
- Describing problems and gathering information

  When describing a problem to IBM, be as specific as possible. Include
  all relevant background information so that IBM Software Support
  specialists can help you solve the problem efficiently. To save time,
  know the answers to these questions: 

  - What software versions were you running when the problem occurred? 
  - Do you have logs, traces, and messages that are related to the
    problem symptoms? IBM Software Support is likely to ask for this
    information. 
  - Can you re-create the problem? If so, what steps were performed to
    re-create the problem? 
  - Did you make any changes to the system? For example, did you make
    changes to the hardware, operating system, networking software, and
    so on. 
  - Are you currently using a workaround for the problem? If so, be
    prepared to explain the workaround when you report the problem.
 
- Submitting problems

  You can submit your problem to IBM Software Support in one of two ways:

  Online 
      Click Submit and track problems on the IBM Software Support site
      at

        http://www.ibm.com/software/support/probsub.html.

      Type your information into the appropriate problem submission form.
  
  By phone 
      For the phone number to call in your country, go to the contacts
      page of the IBM Software Support Handbook at

        http://techsupport.services.ibm.com/guides/contacts.html

      and click the name of your geographic region.
 
  If the problem you submit is for a software defect or for missing or
  inaccurate documentation, IBM Software Support creates an
  Authorized Program Analysis Report (APAR). The APAR describes the
  problem in detail. Whenever possible, IBM Software Support provides a
  workaround that you can implement until the APAR is resolved and a fix
  is delivered. IBM publishes resolved APARs on the Software Support
  Web site daily, so that other users who experience the same problem
  can benefit from the same resolution.

=========================================================================
5.0 NOTICES AND TRADEMARKS
=========================================================================

-----------------------
5.1 Notices:
-----------------------

This information was developed for products and services offered in the
U.S.A. IBM may not offer the products, services, or features discussed in
this document in other countries. Consult your local IBM representative
for information on the products and services currently available in your
area. Any reference to an IBM product, program, or service is not
intended to state or imply that only that IBM product, program, or
service may be used. Any =functionally equivalent product, program, or
service that does not infringe any IBM intellectual property right may be
used instead. However, it is the user's responsibility to evaluate and
verify the operation of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject
matter described in this document. The furnishing of this document does
not give you any license to these patents. You can send license
inquiries, in writing, to:

    IBM Director of Licensing 
    IBM Corporation
    North Castle Drive
    Armonk, NY 10504-1785 U.S.A.

For license inquiries regarding double-byte (DBCS) information, contact
the IBM Intellectual Property Department in your country or send
inquiries, in writing, to:

    IBM World Trade Asia Corporation
    Licensing
    2-31 Roppongi 3-chome, Minato-ku
    Tokyo 106, Japan

The following paragraph does not apply to the United Kingdom or any other
country where such provisions are inconsistent with local law:

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION
"AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Some states do not allow disclaimer of express or implied warranties in 
certain transactions, therefore, this statement might not apply to you.

This information could include technical inaccuracies or typographical
errors. Changes are periodically made to the information herein; these
changes will be incorporated in new editions of the publication. IBM may
make improvements and/or changes in the product(s) and/or the program(s)
described in this publication at any time without notice.

Any references in this information to non-IBM Web sites are provided for
convenience only and do not in any manner serve as an endorsement of
those Web sites. The materials at those Web sites are not part of the
materials for this IBM product and use of those Web sites is at your own
risk.

IBM may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
 
Licensees of this program who wish to have information about it for the 
purpose of enabling: (i) the exchange of information between
independently created programs and other programs (including this one)
and (ii) the mutual use of the information which has been exchanged,
should contact:

    IBM Corporation
    2Z4A/101
    11400 Burnet Road
    Austin, TX 78758 U.S.A.

Such information may be available, subject to appropriate terms and
conditions, including in some cases payment of a fee.

The licensed program described in this document and all licensed material 
available for it are provided by IBM under terms of the IBM Customer
Agreement, IBM International Program License Agreement or any equivalent
agreement between us.

Any performance data contained herein was determined in a controlled 
environment. Therefore, the results obtained in other operating
environments may vary significantly. Some measurements may have been made
on development-level systems and there is no guarantee that these
measurements will be the same on generally available systems.
Furthermore, some measurement may have been estimated through
extrapolation. Actual results may vary. Users of this document should
verify the applicable data for their specific environment.

Information concerning non-IBM products was obtained from the suppliers
of those products, their published announcements or other publicly
available sources. IBM has not tested those products and cannot confirm
the accuracy of performance, compatibility or any other claims related to
non-IBM products. Questions on the capabilities of non-IBM products
should be addressed to the suppliers of those products.

All statements regarding IBM's future direction or intent are subject to
change or withdrawal without notice, and represent goals and objectives
only.

This information may contain examples of data and reports used in daily 
business operations. To illustrate them as completely as possible, the
examples include the names of individuals, companies, brands, and
products. All of these names are fictitious and any similarity to the
names and addresses used by an actual business enterprise is entirely
coincidental.

COPYRIGHT LICENSE:

This information may contain sample application programs in source
language, which illustrate programming techniques on various operating
platforms. You may copy, modify, and distribute these sample programs in
any form without payment to IBM, for the purposes of developing, using,
marketing or distributing application programs conforming to the
application programming interface for the operating platform for which
the sample programs are written. These examples have not been thoroughly
tested under all conditions. IBM, therefore, cannot guarantee or imply
reliability, serviceability, or function of these programs. You may copy,
modify, and distribute these sample programs in any form without payment
to IBM for the purposes of developing, using, marketing, or distributing
application programs conforming to IBM's application programming
interfaces.

-----------------------
5.2 Trademarks:
-----------------------

IBM, CICS, OMEGAMON, Tivoli, Tivoli Enterprise, z/OS, zSeries, pSeries,
AIX, IBMLink, S/390, ibm.com, IBM DeveloperWorks, Passport Advantage,
Rational, Lotus, eServer, and IBM Redbooks are trademarks or registered
trademarks of International Business Machines Corporation in the
United States, other countries, or both.

Intel and Pentium  are trademarks of Intel Corporation in the United
States, other countries, or both.

Linux is a trademark of Linus Torvalds in the United States, other
countries, or both.

Microsoft(R) and Windows are registered trademarks of Microsoft
Corporation in the United States, other countries, or both.

Solaris(TM), Java(TM) and all Java-based trademarks and logos are 
trademarks or registered trademarks of Sun Microsystems, Inc. in the
United States, other countries, or both.

UNIX(R)is a registered trademark of The Open Group in the United States
and other countries.

Other company, product, and service names may be trademarks or service
marks of others.

=========================================================================
