TS2900 Fixlist: Library Code 0058.0000 Release Notes - October 12, 2015 --------------------------------------------------- Component Firmware The following component firmware is required for this release: * Library code: 0058.0000 (IBM_3572_0058-0000.fmg) * Drive firmware: * LTO Gen 7 HH LTO7_FA11 (HH SAS only) * LTO Gen 6 HH LTO6_F9A1 (HH SAS only) * LTO Gen 5 HH LTO5_F991 (HH SAS only) * LTO Gen 4 HH_V2 LTO4_F991 (HH SAS V2 only) * LTO GEN 4 HH V1 dh120723r_C7QJ (HH SAS V1 only) * LTO GEN 3 HH V1 rh090316w_93GQ (HH SAS V1 only) Added Functions: * Support for LTO Gen-7 SAS Tape Drives and Media * A new SNMP Query Configuration capability and MIB * Enhanced Password Security Removed Functions: * None Fixes: * Move medium command to move cleaning cartridge to drive is reported as complete to the host with a delay * DHCP enabled, but library does not pick up an Ipv4 address * 1U uses only cartridge of tier 1 if the slots addresses of cleaning deep cell are reversed with auto clean enabled * The remaining cleaning count and the error information of any cartridge in magazine are reset once I/O station opens * "Minimum number of days before password can be changed", only administrator’s password can be changed during unchangeable days * Supported the updated SNMP Query Configuration v1.2 * Not DNS name but invalid IP address (0.0.0.0) is indicated in NTP server field on Library Map of Web when DNS name is set as NTP server address * Library does not log an error code 0x0010 when library is unable to get IP address from DHCPv4 server * Drive Diagnostics cannot be executed when the library indicates media error * Customer should be able to use 1U without that Feature Active key * GUI Library State incorrect * Web-Hang problem, TCP connection cannot get reused after it receives SYN from client on SYN-RECEIVED and aborts * Supported the updated SNMP Query Configuration v1.4 * The OIDs for libraryconfigGroup does not match the one from MIB * Fixed not to cause the login failure after the user doesn’t operate Web-GUI over 2 minutes on login screen * Fixed to reset only ADMIN password via operator panel * Corrected typo in the message on the end of ADMIN password reset on operator panel * Changed the web dialog message to prompt the password change when login with the password is expired * The user may not use old Java applet after loading new 1U firmware * Failed Date and Time reset to 01/03/2008 after to load code * Added some error retries to the process for getting time by NTP * Pass rule # of pass change before old pass can be used again fail * Web LTO7 Drive Upgrade Failed Retry Took 3 hrs * Web Access via IPv6 Failed then IPv4 Failed * Changed the dialog message indicated when user uses unsuitable version of Java applet Support: Support for the following ITDT version: * ITDT-SE v9.0.0.20150729 * ITDT-GE v9.0.0.20150914 NOTE: For a complete list of ITDT Limitations and Known Issues, please refer to the ITDT Readme file and the "Device Driver Installation and User Guide" distributed with the software. Known Issues and Limitations: * AIX & LpS: No System FW support for SAS boot on Power 5 servers. * AIX & LpS: User may experience communication interruption with the tape device if there are link errors in the SAS interface (No cable pull support on SAS adapters) * ITDT: For a complete list of ITDT Limitations and Known Issues, please refer to the Readme file and the "Device Driver Installation and User Guide" distributed with the software. * RISK Support: LTO Gen 3 drives based on FVT test * General: Operating Systems RHEL6 and higher RHEL7 and higher and Windows 2012 and higher do not support LTO3 HH v1 drives * Windows: IBMTape device driver do not support System Managed Encryption on Win2012 R2 Library Code 0039.0000 Release Notes - June 12, 2015 --------------------------------------------------- Component Firmware The following component firmware is required for this release: * Library code: 0039.0000 (IBM_3572_0039-0000.fmg) * Drive firmware: * LTO Gen 6 HH LTO6_E6R3 (HH SAS only) * LTO Gen 5 HH LTO5_E6Q3 (HH SAS only) * LTO Gen 4 HH_V2 LTO4_E6Q3 (HH SAS V2 only) * LTO GEN 4 HH V1 dh120723r_C7QJ (HH SAS V1 only) * LTO GEN 3 HH V1 rh090316w_93GQ (HH SAS V1 only) Added Functions: * None Removed Functions: * None Fixes: * Fix to address the Logjam Attack on TLS connections using the Diffie-Hellman (DH) key exchange protocol. Support: Support for the following ITDT version: * ITDT-SE v8.0.1 * ITDT-GE v8.0.1 NOTE: For a complete list of ITDT Limitations and Known Issues, please refer to the ITDT Readme file and the "Device Driver Installation and User Guide" distributed with the software. Known Issues and Limitations: * AIX & LpS: No System FW support for SAS boot on Power 5 servers. * AIX & LpS: User may experience communication interruption with the tape device if there are link errors in the SAS interface (No cable pull support on SAS adapters) * HP-UX: Integrity Servers (Itanium) only * HP-UX: The following software packages are required for HP AH303A SAS Host Bus Adapter usage. SerialSCSI-00_B.11.31.0803_HP-UX_B.11.31_IA.depot CommonIO_B.11.31.0803_HP-UX_B.11.31_IA_PA.depot * ITDT: For a complete list of ITDT Limitations and Known Issues, please refer to the Readme file and the "Device Driver Installation and User Guide" distributed with the software. * General: Operating Systems SLES10 SP4 and higher, RHEL5.6 and higher, RHEL6 and higher & Windows 2012 and higher do not support LTO3 HH v1 drives * Windows: IBMTape device driver do not support System Managed Encryption on Win2012 R2 Library Code 0037.0000 Release Notes - April 17, 2015 --------------------------------------------------- Component Firmware The following component firmware is required for this release: * Library code: 0037.0000 (IBM_3572_0037-0000.fmg) * Drive firmware: * LTO Gen 6 HH LTO6_E6R3 (HH SAS only) * LTO Gen 5 HH LTO5_E6Q3 (HH SAS only) * LTO Gen 4 HH_V2 LTO4_E6Q3 (HH SAS V2 only) * LTO GEN 4 HH V1 dh120723r_C7QJ (HH SAS V1 only) * LTO GEN 3 HH V1 rh090316w_93GQ (HH SAS V1 only) Added Functions: * None Removed Functions: * RC4 cipher related to CVE-2015-2808 Fixes: * Fix to remove RC4 cipher regarding "Bar Mitzvah" Attack for SSL/TLS Support: Support for the following ITDT version: * ITDT-SE v8.0.1 * ITDT-GE v8.0.1 NOTE: For a complete list of ITDT Limitations and Known Issues, please refer to the ITDT Readme file and the "Device Driver Installation and User Guide" distributed with the software. Known Issues and Limitations: * AIX & LpS: No System FW support for SAS boot on Power 5 servers. * AIX & LpS: User may experience communication interruption with the tape device if there are link errors in the SAS interface (No cable pull support on SAS adapters) * HP-UX: Integrity Servers (Itanium) only * HP-UX: The following software packages are required for HP AH303A SAS Host Bus Adapter usage. SerialSCSI-00_B.11.31.0803_HP-UX_B.11.31_IA.depot CommonIO_B.11.31.0803_HP-UX_B.11.31_IA_PA.depot * ITDT: For a complete list of ITDT Limitations and Known Issues, please refer to the Readme file and the "Device Driver Installation and User Guide" distributed with the software. * General: Operating Systems SLES10 SP4 and higher, RHEL5.6 and higher, RHEL6 and higher & Windows 2012 and higher do not support LTO3 HH v1 drives * Windows: IBMTape device driver do not support System Managed Encryption on Win2012 R2 Library Code 0036.0000 Release Notes - November 7, 2014 --------------------------------------------------- Component Firmware The following component firmware is required for this release: * Library code: 0036.0000 (IBM_3572_0036-0000.fmg) * Drive firmware: * LTO Gen 6 HH LTO6_E6R3 (HH SAS only) * LTO Gen 5 HH LTO5_E6Q3 (HH SAS only) * LTO Gen 4 HH_V2 LTO4_E6Q3 (HH SAS V2 only) * LTO GEN 4 HH V1 dh120723r_C7QJ (HH SAS V1 only) * LTO GEN 3 HH V1 rh090316w_93GQ (HH SAS V1 only) Added Functions: * None Removed Functions: * SSLv3 support related to CVE-2014-3566 Fixes: * Fix to remove SSLv3 support Support: Support for the following ITDT version: * ITDT-SE v8.0.1 * ITDT-GE v8.0.1 NOTE: For a complete list of ITDT Limitations and Known Issues, please refer to the ITDT Readme file and the "Device Driver Installation and User Guide" distributed with the software. Known Issues and Limitations: * AIX & LpS: No System FW support for SAS boot on Power 5 servers. * AIX & LpS: User may experience communication interruption with the tape device if there are link errors in the SAS interface (No cable pull support on SAS adapters) * HP-UX: Integrity Servers (Itanium) only * HP-UX: The following software packages are required for HP AH303A SAS Host Bus Adapter usage. SerialSCSI-00_B.11.31.0803_HP-UX_B.11.31_IA.depot CommonIO_B.11.31.0803_HP-UX_B.11.31_IA_PA.depot * ITDT: For a complete list of ITDT Limitations and Known Issues, please refer to the Readme file and the "Device Driver Installation and User Guide" distributed with the software. * General: Operating Systems SLES10 SP4 and higher, RHEL5.6 and higher, RHEL6 and higher & Windows 2012 and higher do not support LTO3 HH v1 drives * Windows: IBMTape device driver do not support System Managed Encryption on Win2012 R2 Library Code 0034.0000 Release Notes - September 5, 2014 --------------------------------------------------- Component Firmware The following component firmware is required for this release: * Library code: 0034.0000 (IBM_3572_0034-0000.fmg) * Drive firmware: * LTO Gen 6 HH LTO6_E6R3 (HH SAS only) * LTO Gen 5 HH LTO5_E6Q3 (HH SAS only) * LTO Gen 4 HH_V2 LTO4_E6Q3 (HH SAS V2 only) * LTO GEN 4 HH V1 dh120723r_C7QJ (HH SAS V1 only) * LTO GEN 3 HH V1 rh090316w_93GQ (HH SAS V1 only) Added Functions: * None Removed Functions: * None Fixes: * Sign algorithm changed by the Java certificate. Support: Support for the following ITDT version: * ITDT-SE 8.0 * ITDT-GE 8.0 Known Issues and Limitations: * AIX & LpS: No System FW support for SAS boot on Power 5 servers. * AIX & LpS: User may experience communication interruption with the tape device if there are link errors in the SAS interface (No cable pull support on SAS adapters) * HP-UX: Integrity Servers (Itanium) only * HP-UX: The following software packages are required for HP AH303A SAS Host Bus Adapter usage. SerialSCSI-00_B.11.31.0803_HP-UX_B.11.31_IA.depot CommonIO_B.11.31.0803_HP-UX_B.11.31_IA_PA.depot * ITDT: For a complete list of ITDT Limitations and Known Issues, please refer to the Readme file and the "Device Driver Installation and User Guide" distributed with the software. * General: Operating Systems SLES10 SP4 and higher, RHEL5.6 and higher, RHEL6 and higher & Windows 2012 and higher do not support LTO3 HH v1 drives * Windows: IBMTape device driver do not support System Managed Encryption on Win2012 R2 Library Code 0033.0000 Release Notes - June 16th, 2014 --------------------------------------------------- Component Firmware The following component firmware is required for this release: * Library code: 0033.0000 (IBM_3572_0033-0000.fmg) * Drive firmware: * LTO Gen 6 HH LTO6_D8E5 (HH SAS only) * LTO Gen 5 HH LTO5_D8D5 (HH SAS only) * LTO Gen 4 HH_V2 LTO4_D8D5 (HH SAS V2 only) * LTO GEN 4 HH V1 dh120723r_C7QJ (HH SAS V1 only) * LTO GEN 3 HH V1 rh090316w_93GQ (HH SAS V1 only) Added Functions: * None Removed Functions: * None Fixes: * Implemented Heartbleed Security Update. The “Heartbleed” security flaw exposes security vulnerabilities in OpenSSL software packages. The OpenSSL software package has been updated to close the security vulnerabilities. Known Issues and Limitations: Library Code 0028.0000 Release Notes - November 08, 2013 --------------------------------------------------- Component Firmware The following component firmware is required for this release: * Library code: 0028.0000 (IBM_3572_0028-0000.fmg) * Drive firmware: * LTO Gen 6 HH LTO6_D8E5 (HH SAS only) * LTO Gen 5 HH LTO5_D8D5 (HH SAS only) * LTO Gen 4 HH_V2 LTO4_D8D5 (HH SAS V2 only) * LTO GEN 4 HH V1 dh120723r_C7QJ (HH SAS V1 only) * LTO GEN 3 HH V1 rh090316w_93GQ (HH SAS V1 only) * Note: Identifing V2 drives through the web interface: 1. Select Monitor System from the navigation pane on the left side of the page. 2. Select Library Map to display the graphical view of the library. 3. Click on the Drive component on the library map. Drive information will be displayed on the right side of the page. 4. Refer to the Product ID to determine which drive is installed in the library. • Product ID: ULT3580-HH4 • Product ID: ULT3580-HH4 V2 5. Ensure you download and install the correct drive firmware. • Firmware for the ULT3580-HH4 drive is not compatible with the ULT3580-HH4 V2 drive. • Firmware for the ULT3580-HH4 V2 drive is not compatible with the ULT3580-HH4 drive. * SNMP Mib Files: IBM_TS2900_MIB_2011_2_Rev.013.mib Note: The MIB file is not installed on the library. It is installed on the Customer's SNMP client server. Added Functions: * None Removed Functions: * None Fixes: * Fix cookie failure on Safari * Ignore the first two digit of library serial number when the code calculate MAC and WWNN Support: Support for the following ITDT version: * ITDT-SE v7.1.0 Build065 Known Issues and Limitations: (1) AIX & LpS: No System FW support for SAS boot on Power 5 servers. (2) AIX & LpS: User may experience communication interruption with the tape device if there are link Errors in the SAS interface (No cable pull support on SAS adapters) (3) HP-UX: Integrity Servers (Itanium) only (4) HP-UX: The following software packages are required for HP AH303A SAS Host Bus Adapter usage. - SerialSCSI-00_B.11.31.0803_HP-UX_B.11.31_IA.depot - CommonIO_B.11.31.0803_HP-UX_B.11.31_IA_PA.depot (5) ITDT: For a complete list of ITDT Limitations and Known Issues, please refer to the Readme file and the "Device Driver Installation and User Guide" distributed with the software. (6) Windows 2012/IBM SAS: Host Bus Adapters for 6GB with part number 46M0907 running on xSeries servers will not be supported until a drive and firmware package are released by System X (7) Operating Systems SLES10 SP4 and higher, RHEL5.6 and higher, RHEL6 and higher & Windows 2012 and higher do not support LTO3 HH v1 drives ===================================================================================================