TS3100/TS3200 LTO5 Drive Readme File:

Files in this download contain Licensed Materials, property of IBM,
(C) Copyright IBM Corp. 1998-2010.  All Rights Reserved.  See the 
Licensing agreement presented when the driver is downloaded or see it
at: http://www-947.ibm.com/systems/support/machine_warranties/machine_code.html

IBM periodically releases firmware updates that are intended to, 
among other things, increase overall reliability, improve tape handling, 
further reduce any possibility of data loss/data error, and provide continued 
enhancements to diagnostic capabilities. 

The readme files contain information that may not be included in the IBM
Tape Library documentation. The readme files take precedence over the documentation.  
Therefore, any information in this file that conflicts with information 
in the documentation will supercede the SOSG.

In order to provide maximum performance and reliability, it is recommended that the latest 
version of microcode is installed on your IBM LTO tape devices.These firmware updates are 
intended to, among other things, increase overall reliability, improve tape handling, further 
reduce any possibility of data errors, and provide continued enhancements to diagnostic 
capabilities.

===================================================================================================

CODE LEVEL NAMING CONVENTIONS FOR HALF HIGH DRIVES:
GENE_FVER_CON_FF_ro

GENE:  is the drive generation (LTO5 for Ultrium5)
FVER:  is the firmware version
CON :  is the connection type (SAS -(SAS), Fibre - (FC))
FF  :  is the form factor (Full High - fh, Half High - hh)

Example:LTO5_D8D4.SAS.fh.ro
Generation: LTO5
Firmware Version: D8D4
Connection: SAS
Form Factor: Full High (fh)


SUPPORTED OPERATING SYSTEMS:
This tape drive works with the following operating systems: AIX, HPUX, Linux pSeries, Linux 
zSeries Sun Solaris, Windows. For details on supported tape attachment please refer to the System Storage
Interoperation Center website.  

http://www.ibm.com/systems/support/storage/config/ssic/


TROUBLESHOOTING:
IBM Tape Diagnostic Tool (ITDT) provides the customer with functionality 
to perform maintenance tasks and run diagnostic tasks to determine tape 
device issues.  This is available to download with the device driver.


===================================================================================================

LTO5 FEATURES AND NOTICES:

- Features IBM Ultrium 5 Tape Drive in Half-High Form Factor.
- 6bps SAS interface.
- Physical storage capacity up to 3 TB (with 2:1 compression) of capacity in a single cartridge.
- LTO 5 tape drive can read and write to LTO 4 cartridges and read LTO 3 cartridges with improved 
  data rates.
- The hardware encryption and decryption core and control core reside in the IBM Ultrium 5 tape 
  drive.
- The IBM Ultrium 5 tape drive is designed to support up to 140 MBps native data-transfer rates 
  and up to 1.5 TB native physical capacity when using the IBM System Storage Ultrium 1.5 TB Data 
  Cartridge (3.0 TB with 2:1 compression).

 	

Note: Depending if your tape drive is standalone or in a library, will determine what drive code
      should be installed and is supported. See your tape drive fixlist for guidance.