Welcome to IBM Subsystem Device Driver DSM (SDDDSM) IBM(R) Subsystem Device Driver DSM Version 2.5.3.0 README for Windows Server 2012, Windows Server 2012 Server Core, Windows Server 2012 R2,Windows Server 2012 R2 Server Core, Windows Server 2016, Windows Server 2016 Server Core, Windows Server 2019, Windows Server 2019 Server Core Dec 05, 2018 ------------------------------------------------------------------------------- CONTENTS 1.0 About this README file 1.1 Who should read this README file 1.2 How to get help 2.0 Prerequisites for SDDDSM 3.0 SDDDSM change history 3.1 Defects Fixed 3.2 New Features 3.3 Feature Details and Restrictions 3.4 Known issues and workaround details 4.0 User license agreement for IBM device drivers 4.1 Background / Purpose 4.2 Definitions 4.3 License grant 4.4 Responsibilities 4.5 Confidential information 4.6 Limitation of liability 4.7 Termination 4.8 Representations and warranties 4.9 General provisions 4.10 Appendix A 5.0 Notices 6.0 Trademarks and service marks ------------------------------------------------------------------------------- 1.0 About this README file Welcome to IBM Subsystem Device Driver DSM(SDDDSM). This README file contains the most recent information about the IBM Subsystem Device Driver DSM, Version 2 Release 5 Modification 3 Level 0 for Windows Server 2012, Windows Server 2012 R2, Windows Server 2012 Server Core, Windows Server 2012R2 Server Core, Windows Server 2016, Windows Server 2016 Server Core,Windows Server 2019, Windows Server 2019 Server Core. IBM recommends that you go to this Web site to get the most current Information about this release of SDDDSM: http://www-01.ibm.com/support/docview.wss?uid=ssg1S4000350 You should carefully review the following information available through this site: 1. The most current README file. This file contains corrections to the readme file, corrections to the SDDDSM User's Guide, and documentation updates made since this copy of the README was prepared. 2. The SDDDSM User's Guide. SDDDSM can be installed in so many different environments/configurations so detailed information about each environment is placed in the appropriate chapter of the SDDDSM User's Guide. The 'Summary of Changes' section of the SDDDSM User's Guide can help you quickly determine if the latest changes affect you. 3. The Flashes. As we become aware of any information that is likely to impact a broad set of our customers, Flashes are prepared and posted on this site. You should review this section periodically to see any new Flashes that have been posted since your last review. 4.All supported storages are provided in the above link. Click on The "Support Matrix for SDD SDDPCM and SDDDSM" link for SDDDSM supported storage. For prerequisites information, ensure that you look in the SDDDSM User's Guide as well as the prerequisites section of this readme file for the latest updates. 1.1 Who should read this README file This README file is intended for storage administrators, system programmers, and performance and capacity analysts. 1.2 How to get help Go to the following Web site for SDDDSM technical support http://www-947.ibm.com/support/entry/portal/product/system_storage/storage_software/other_software_products/system_storage_multipath_subsystem_device_driver?productContext=-1564959213 Call one of the following numbers to obtain nontechnical or administrative support, such as hardware and software orders, hardware maintenance,services contract of entitlement, and invoices: . For commercial or state and local support operations: 1-877-426-6006 (Listen to the voice prompts) . For business partner support operations: 1-800-426-9990 . For federal government support operations: 1-800-333-6705 ------------------------------------------------------------------------------- 2.0 Prerequisites for SDDDSM OSes: Windows Server 2012 Windows Server 2012 Server Core Windows Server 2012 R2 Windows Server 2012 R2 Server Core Windows Server 2016 Windows Server 2016 Server Core SDD: If SDD is installed on the system then it must be uninstalled prior to the install of SDDDSM. Hotfixes: the following hotfixes must be installed prior to the install of SDDDSM For W2K8: KB967349 This hotfix is recommended when access to the storage device fails after disconnecting all data cables and then reconnecting them. For detail, please go to the following link: http://support.microsoft.com/kb/967349 Note: Please check with Microsoft if there is any change in the above links. 2.1 How to install SDDDSM package ============================= 1. Select the package depending on your requirement i.e 32/64 bit package. 2. Unzip the SDDDSM package. 3. Open a command prompt (with Administrative privileges). 4. Go to the SDDDSM Driver location. 5. Run setup.exe (requires Administrative privileges) 6. Follow the instructions and say "Yes" accordingly. 7. Restart the machine. 8. Verify SDDDSM is installed successfully by running "datapath query version". 2.2 How to uninstall SDDDSM package =============================== 1. Open a command prompt (with Administrative privileges) 2. Go to the SDDDSM Driver location. 2. Run "setup -u" 3. Restart the machine. 3.0 SDDDSM Change History =============================================================================== 3.1 Defects Fixed Defects fixed in 2.5.3.0 5669 Surprise Removal of GM target volume 5670 No Preferred path when fc target port mode is transitional Defects fixed in 2.5.2.0 5657 Merge separate code for Windows 2016 Defects fixed in 2.5.1.0 5624 Quoted path in registry Defects fixed in 2.5.0.0 5584 Windows Server 2016 Driver Compatibility Changes. 5616 Disk Surprise removals/Hyper-V VM Failovers. 5621 Issue with "Least IO and Weight" load balance policy. 5618 I/O failures in "two path configuration" because of fail over logic in 2480. 5615 Hyper-V Crash or I/O issues while unmapping the Luns from storage. 5601 Disks losing PR Registrations with "rmhostport". 5617 SAN Boot Crash. 5596 Missing "mpiolist.exe". 5600 sddShowCSVLuns script issues. 5583 Issue with "datapath query port" output. Defects fixed in 2.4.8.0 5576 Removed few unnecessary prints during PRIN Read call which were flooding the sdd logs. 5436 Fixed "datapath query device -c" device count issue that included closed devices. Defects fixed in 2.4.7.1 5542 When NPIV enters the Transitional state from Disabled with all the SDDDSM paths in Non-Preferred state, the paths to the Virtual ports also become Non-Preferred. This path configuration causes I/O failures as soon as NPIV moves into the Enabled state. Defects fixed in 2.4.7.0 5527 NPIV Issue with SDDDSM - Shows All TPG Ports in NON-OPTMIZED state with NPIV Disabled. 5536 Win2k12 Crash upon changing the state of fctargetportmode Defects fixed in 2.4.6.0 5458 SDDDSM Setup.exe file not signed 5473 T2 recovery changes 5481 Update "sample_sddsrv.conf" file Defects fixed in 2.4.5.1 5459 On a hyper-v setup with CSVs, when NAR is run on a 3 cluster node, I/Os exits due to reservation loss Defects fixed in 2.4.5.0 5323 Wrong description of adapter in SDDDSM logs. 5327 datapth query device output label should be changed. 5339 Removal of "-l" option from datapath query 5341 Error messages should be consistent for removed devices. 5412 Specific message should be displayed for failing size of LUN 5419 SDDDSM directory list log issue. 5424 sdddsm "dpq logs" error 5425 Datapath query not showing the devices. 5427 No check for numerical value for "-d" option 5440 ODX KCQ addition 5452 LB policy is writing on preferred and non preferred paths Defects fixed in 2.4.4.0 5396 In 7.3.0.x SVC when "rmnode" command is triggered PR registration- reservation gets deleted and because of that SDDDSM, loses all the paths to the LUN leading to I/O failure. 5264 Wrong message while making online adapter online again 5272 Failover policy for path selection corrected to choose optimized paths first. 5276 SDD is not clearing the error count for LUNs 5288 SDD is displaying big loop when device range is not valid. 5289 Change path status to SCSI standard. 5291 SDDDSM Installer is not checking the previous version 5292 Load balance policy is showing as optimized policy only. 5313 sddgetdata.bat does not flush logs cached in the sdd driver 5315 SDDDSM installer is not checking the SDDDSM version properly. 5320 Wrong Adapter Status when any of the device path is offline. 5332 "Datapath.exe" crashes on wrong adapter number. 5337 SDDDSM goes into the infinite loop when loses all the paths. 5338 SDDDSM showing wrong messages after aborting software installer 5342 SDDDSM is not checking for present paths of LUNS. 5351 There is no check for numeric value in datapath commands 5352 SDDDSM is showing wrong message for datapath commands. 5354 Adapter port is not coming to online state. 5362 "Adaptstat" command is not giving any error message. 5363 SDDDSM is not recognizing the adapter state. 5372 datapath query device in loop fails to bring on closed devices 5376 "Datapath.exe" crashes on more than 10-digit number. 5379 SDDDSM Installer does not check for invalid parameters. 5381 SDDDSM silent uninstaller gives wrong message. 5382 SDDDSM Installer is giving wrong messages 5386 Change Adapter Port label to Adapter in datapath query output. Defects fixed in 2.4.3.x 4851 Sandboot systems sometime crashes when reinstalling SDDDSM 4919 Garbage information get printed in event 17 & 18 4933 HyperV clients lost access when connected thru 2 paths 4940 Fix buffer overrun in tracing code 4973 Potential Crash on Windows 2008 Cluster (PMR 48817 and 18717) 4991 Under high san error loads, the windows SDDDSM SQL server crashed (PMR 78254) 5181 Workaround for the failures during inquiry and read capacity commands on win2012. 5193 New enforcement by Microsoft on Win2012 certification such as running static code verification. 5198 Datapath should not show/list Closed paths, removed devices and disabled adapters. If the unavailable/closed path/device comes back online, the path/device number should be restored. If the adapter is enabled, it should be seen in datapath output. 5206 HBA details not reported by hbainfo.exe on Windows 2012 server. 5210 For Win 2k3 with MSCS and VXVM 5.1 SP2, if one host in the cluster with 2 nodes was shutdown abruptly then the other hosts was having 3 out of 4 paths failing with reservation conflict. 5215 Workaround for system crash that occurred while running Microsoft's MSDT tool on Win2K3 64 bit machine. 5226 "Subsystem Device Driver DSM" command prompt shortcut is not visible in Start Apps in Win2K12. 5230 In Win2K12 MS Cluster when resources are moved from first host to second host and if I/O are running on first host then they go into infinite retry. 5248 When Windows 2012 Server Core, with cluster setup and numerous Hyper-V 3.0 Vms, is under heavy i/o stress causing extensive memory usage, paging and cpu utilization it crashes while handling an invalid buffer. 5249 In Device Manager MPIO property sheet on close reports an unknown error. 5251 "retry not needed" message unneccesarily adding noise to the logs. 5252 Failover policy does not check path registration status. 5253 Window datapath query fails to display lun size > 2TB. 5254 Crash on Windows 2008 R2 due to invalid/stale path entry in SDDDSM. 5271 datapath query adapter shows active adapter list instead of active adapter port list. Defects fixed in 2.4.2.x 4590 Load Balancing issues S1012281 SASWWPN shows only one port 238707 Oracle DB crash at secondary power off in PPRC 4726 Unable to restore a path when TargetPdo==NULL due to race condition 4733 Add retry delay for sense 2/4/C not ready errors 4735 Remove Ds4K/5K support from the driver and sdddsm.inf file 4738 Reduce SDDDSM trace logging for CSV reservation errors. Defects fixed in 2.4.1.x 4558 Upgrade MPIO package to 1.22 from 1.21 (2.4.1.1-1) (http://support.microsoft.com/Default.aspx?id=961640) 4590 Incorrectly configured more than 32 paths 4591 Force retry on the same path after SrbStatus 0e, bus reset 4593 Force additional retry after 3 repeatable errors within the predefined time threshold 4567 Upgrade MPIO package to 1.23 from 1.22 (2.4.1.2-2) (http://support.microsoft.com/Default.aspx?id=961640) Defects fixed in 2.4.0.x 96242 Disk Manager hang after resource moved to another cluster 4467 Datapath query devicestats fails with a -d option. 4474 Datapath set last adapter returns a wrong message. 4475 datapath set last path returns a wrong message. 4447 EventLog indicates that always Path0 to the device came online. 4446 System Crashes when the bootdisk is unmaped from one host wwpn in 2145. 214897 Datapath query wwpn fails intermittently. 4336 Unmounting Virtual Devices in Microsoft virtual Server Fails. 4334 Fix exit message for non-Administrator user installing SDDDSM on W2K8. Defects fixed in 2.3.0.x 4327 Datapath query device -d supports all devices Defects fixed in 2.2.0.x 208338 Disable ports does not take paths offline 4267 X64 Host crashes after receiving a TPC probe. 4239 SDDDSM failed a path during concurrent esm download Defects fixed in 2.1.1.x 3775 System crash when REPORT TARGET PORT GROUP fails due to Lun not ready =============================================================================== 3.2 New Features Features added in 2.5.3.0 5676 Enhancement of rescanhw Features added in 2.5.2.0 5658 Collect SetupAPI logs. 5659 datapath query version enhancement Features added in 2.5.0.0 5594 SCSI behavior change for Spectrum Virtualize. 5593 Standalone SAS support. 5592 Enhanced SDDGETDATA.BAT file to capture additional logs. 5591 Increased SDD Log retention period. 5590 Enhanced pathtest.exe tool for SDD Verbose log/debug Features added in 2.4.8.0 5548 Enhanced Path Failover Mechanism. 5558 New IO Routing Options for SQST/LQD/LBYTES LB Policies. 5466 New Preferred Path Option. 5551 New Query Port Option with Datapath. Features added in 2.4.7.0 5510 PR management tool - GUI enhancement and support for all SCSI 3 PR commands. 5524 Enhanced "datapath query adapter -a" 5524 "sddShowCSVLuns.ps1" power shell script to show Clustered Shared Volume details Features added in 2.4.6.0 5300 Support for extended SRB type 5301 Quick failover to active node during SVC upgrade 5405 Automatic NDVM re-scan 5447 Format CLI output with color highlights 5463 Add local timestamp to sdd log entry in the windows event mgmt 5465 Support for hardware re-scan using a datapath command 5471 Increase Log count and size by default Features added in 2.4.5.0 5302 Path performance plug-in 5406 Additional load balance policies 5407 iSCSI Support 5408 iSCSI in Hyper-v support 5409 FC in Hyper-v support 5420 Extend failgroup limit per adapter Features added in 2.4.4.0 5275 Removed device should get deleted from SDD queue. 5281 Provide cluster LUN reservation status on datapth query 5333 Datapath query messages should be changed. 5334 Error message should be changed for adaptstats query. 5336 SDD should show the invalid device in single statement. 5387 datapath should allow user to see internal build version of SDD Features added in 2.4.3.x 4934 Display DS8800 8 ports FC adapter by 'datapath query portmap' xxxx Support IBM Storwize V7000 5107 Datapath should show lun/device size in output. 5213 Ability to dynamically configure the size and count of SDD log file(s) Features added in 2.4.2.x 4657 SASWWPN using saswwpn.bat Features added in 2.4.1.x 4534 Support Windows Enterprise Business Server(EBS) 4559 Drop support of DS4K and DS5K devices. The user must uninstall the prior version of SDDDSM before installing the new SDDDDSM to remove the device definition from the host. 4567 Enhanced trace statement and upgrade MPIO package to 1.23.3790.2451 Features added in 2.4.0.x 4326 RSSM support Features added in 2.2.0.x 4116 Windows 2008 Support Features added in 2.1.1.x 3810 event log support in SDDDSM 3755,3751 support essutil in SDDDSM 3104,3745 support 'datapath clear count' in SDDDSM 3772,3745 support 'datapath query version' in SDDDSM 3505,3745 Support '-i' and '-d' option in 'datapath query device' to run datapath repeatedly and by model 3690,3745 support change policy dynamically using 'datapath set policy' 3746 display SCSI address of paths using '-s' in 'datapath query device' =============================================================================== 3.3 Feature/Defect Details and Restrictions 5669 Surprise Removal of GM target volume In Global Mirror sites, all paths are removing and eventually the replicated disk will disappear from passive side host. This defect provides a solution for customer in target site to avoid unexpected disk removal. 5676 Enhancement of rescanhw Currently, SDDDSM provide a rescanhw command to send RTPG command and scan the hardware changes.In this version the command is enhanced to support: a. Inquiry command. b. To send command only to specified device. 5670 No Preferred path when fc target port mode is transitional When FC target port is in transitional mode SDDDSM can’t handle preferred path which is connected to the primary port correctly. The defect fixes the issue and ensures the preferred paths are right in all 3 modes. 5658 Collect SetupAPI logs Improve sddgetdata.bat to collect SetupAPI logs (setupapi.dev.log and setupapi.api.log). 5659 datapath query version enhancement The SDDDSM 2.5.2.0 command "datapath query version" prints the version of the sdddsm.sys file. However, this version may not be identical to the SDDDSM version that is running in the windows kernel (For example, not reboot the system after upgrading the SDDDSM). Sometimes a customer needs an easy method to get the current version of the running SDDDSM. This feature adds a new option to the datapath query version to display the running version. Use the following command: datapath query version -r IBM SDDDSM Version 2.5.2.0 4657 SASWWPN using saswwpn.bat (download sasflash.exe from LSI website) For this feature to work, you will have to download the sasflash utility from LSI website and replace it in the SDDDSM package. Follow the procedure mentioned below to do so. Note: The below link or steps could change if LSI modifies them. a> Visit the following link https://www.broadcom.com b> Search for "Installer_P20_for_Windows" c> Unzip the downloaded package. d> Get the "sasflash.exe" e> Replace it with the sasflash.exe in SDDDSM package. f> Install the new package on the server. Note: If SDDDSM is already installed on the server, get the sasflash.exe using the procedure above till step "d" and then replace the file "sasflash.exe" in "\Program files\IBM\SDDDSM\" with the new one. 4934 "datapath query essmap" and "datapath query portmap" commands are only supposed to be used by an IBM PFE. 5616 Disk Surprise removals/Hyper-V VM Failovers. A workaround has been added to synchronize the multiple failovers issued by mpio to sdddsm. Otherwise this would cause some inconsitent device/path states to be maintained between mpio and sdddsm. 5621 Issue with "Least IO and Weight" load balance policy. There were issues with IO re-balance on all the paths during failover and failback. This has been fixed by resetting the adapter IO statistics, while the adapter state moves from failed to normal. 5618 I/O failures in "two path configuration" because of fail over logic in 2480. There were issues with fail over logic added in 2480 while disks have only 2 paths remaining, causing I/O failures. This has been fixed for the 2 path scenarios. 5615 Hyper-V Crash or I/O issues while unmapping the Luns from storage. On Windows Server 2008, if there is a Hyper-V hosted on a SAN Disk and if one of the other mapped disk to this Parent Host is unmapped, then there are chances of seeing Hyper-V crashes. 5624 Quoted path in registry After the SDDDSM is installed, there is a parameter in the registry called ImagePath which points to the absolute path of sddsrv.exe. This change makes the path in quotes for security reasons. =============================================================================== 3.4 Known issues and workaround details ------------------------------------------------------------------------------- 4.0 User license agreement for IBM device drivers NOTICE: PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE PROGRAM AND DOCUMENTATION. IBM(R) WILL ONLY LICENSE THIS PROGRAM AND DOCUMENTATION TO YOU IF YOU FIRST ACCEPT THE TERMS OF THIS AGREEMENT. BY USING THE PROGRAM AND DOCUMENTATION, YOU AGREE TO ABIDE BY THESE TERMS AND APPLICABLE COPYRIGHT LAWS. IBM LIMITS YOUR ACCEPTANCE OF THE PROGRAM AND DOCUMENTATION TO THE TERMS OF THIS AGREEMENT. The Program and Documentation is owned by International Business Machines Corporation or one of its subsidiaries (IBM) or IBM suppliers, and is copyrighted and licensed, not sold. IBM does not transfer title to this Program and Documentation to you. The terms of this Agreement apply to any additional license copy of the Program or Documentation that IBM authorizes you to make. The term "Program" means the original program and all whole or partial copies of it, including portions merged with other programs. A Program consists of machine-readable instructions and related license materials. Under this Agreement, IBM provides you with a license to use the Program and Documentation only. 4.1 Background/Purpose IBM provides certain device drivers and Documentation under this Agreement. The device drivers and library support that IBM provides under this Agreement are in object code form only. Appendix A of this Agreement indicates the server platforms that are supported. IBM uses announcements to withdraw service for device drivers, feature codes, etc., on hardware and/or operating system platforms. IBM reserves the right to change the Programs or Documentation at any time without prior notice. 4.2 Definitions Derivative Work is a work based on a preexisting work, including a compilation. A Derivative Work prepared without the authorization of the copyright owner of the preexisting work would constitute a copyright infringement. Documentation is the Program documentation that IBM provides to you as follows: IBM Subsystem Device Driver and README files. Object Code is machine-readable instructions in Object Code format. It is substantially in binary form and directly executable by a computer after suitable processing but without the intervening steps of compilation or assembly. Program is the IBM Subsystem Device Driver in Object Code form. 4.3 License grant IBM grants you a revocable, nontransferable, nonexclusive, worldwide, paid-up copyright license to: 1. Use the Program and Documentation solely on the platforms and with the applicable IBM devices described in Appendix A of this Agreement. 2. Maintain one copy of the Program for backup purposes only. Your license to the Programs and Documentation terminates when you no longer rightfully possess the IBM device described in Appendix A. This Agreement does not grant you any right or license to prepare Derivative Works of the Program and Documentation. Nothing in this Agreement grants either party any rights or licenses under any patents or patent applications regardless of whether use and/or execution of the software licensed herein may be construed to practice one or more patents. 4.4 Responsibilities You agree to use the Program and Documentation only with the IBM device described in Appendix A of this Agreement. You will not: 1. otherwise copy, display, transfer, adopt, modify or distribute in any form, the Program and Documentation, except as IBM expressly authorizes in the Documentation 2. decompile, disassemble, reverse engineer, or in any way modify the Program or Documentation 3. sell, rent, lease, sublicense the Program or Documentation, unless explicitly permitted by law without the possibility of contractual waiver; and sublicense or assign the license for the Program and Documentation 4.5 Confidential information Any information which either party may disclose to the other party shall not be deemed to be confidential. If the parties require the exchange of confidential information, such exchange will be made under a separate written confidentiality agreement. 4.6 Limitation of liability IN NO EVENT SHALL IBM OR ITS SUPPLIERS BE LIABLE FOR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, LOSS OF DATA, LOST PROFITS, BUSINESS INTERRUPTION OR ANY SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND NOTWITHSTANDING THE FAILURE OF ESSENTIAL PURPOSE OF ANY REMEDY. You acknowledge that circumstances may arise where, because of a default on IBM's part or other liability, you may be entitled to recover damages. Under any such circumstances, you agree that in each such instance, regardless of the basis on which you are entitled to claim damages, IBM shall be liable only up to an amount equal to five thousand U.S. dollars ($5,000). This limitation will not apply to claims relating to bodily injury (including death), and damage to real property and personal property. 4.7 Termination Termination for Cause. If either party fails to perform its obligations hereunder, then the other party may terminate this Agreement or the license granted hereunder for cause. Effect of Termination. The rights and licenses granted to you under this Agreement shall automatically terminate upon the termination of this Agreement. 4.8 Representations and warranties THE PROGRAM AND DOCUMENTATION IS PROVIDED ON AN "AS IS" BASIS. IBM MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO THE PROGRAM AND DOCUMENTATION.IBM DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. THE ENTIRE RISK ARISING OUT OF THE USE OR PERFORMANCE OF THE PROGRAM AND DOCUMENTATION REMAINS WITH YOU. 4.9 General Provisions Transfer. You may transfer possession of the program and its media and Documentation to another pay with the transfer of the IBM device described in Appendix A on which such Program is used with. If you do so, you must give the other party a copy of these terms and provide all user documentation to that party, and such party must first agree to such terms before it uses the Program and Documentation. Upon transfer of the Program and Documentation, you must destroy all your copies of the Program and Documentation. Severability. If any provision of this Agreement is found to be illegal or unenforceable, the remainder of this Agreement shall continue in full force and effect provided that the Agreement still effectuates the parties' original intent. Governing Law and Jury Trial Waiver. This Agreement shall be governed by the laws of the State of New York, excluding its conflict of law rules. Each party hereby agrees to waive its rights to a trial by jury. Modifications. No modification to this Agreement, nor any waiver of any rights, shall be effective unless agreed to in a writing that is executed by both parties, and the waiver of any breach or default of this Agreement shall not constitute a waiver of any other right or of any subsequent breach or default. Limitations on Legal Actions. Neither party will bring a legal action against the other more than two (2) years after the cause of action arose. Both parties will act in good faith to resolve disputes. Order of Precedence. In the event of a conflict in terms between this Agreement and another agreement, the terms of this Agreement shall take precedence and prevail over such other terms. Entire Agreement. This Agreement constitutes the entire and exclusive agreement between the parties with respect to this subject matter. All previous discussions and agreements with respect to this subject matter are superseded by this Agreement. 4.10 Appendix A This Appendix indicates: 1. Which specific IBM devices the Program and Documentation are to be used with: IBM devices: IBM SAN Volume Controller 2. For what specific server platforms the Program and Documentation are to be used on and for what software requirements apply to the use of the Program and Documentation reference the ESS Open Systems Support Web page, located at: www.ibm.com/storage/support/2145 for IBM SAN Volume Controller support CONTINUING WITH THIS INSTALLATION CONSTITUTES YOUR ACCEPTANCE OF THE TERMS OF THE ABOVE 'USER LICENSE AGREEMENT FOR IBM DEVICE DRIVERS' ------------------------------------------------------------------------------- 5.0 Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: IBM World Trade Asia Corporation Licensing 2-31 Roppongi 3-chome, Minato-ku Tokyo 106, Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND,EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. Any references in this information to non-IBM Web sites are Provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation Information Enabling Requests Dept. DZWA 5600 Cottle Road San Jose, CA 95193 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM License Agreement for Non-Warranted Programs. Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurement may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. =============================================================================== IBM agreement for licensed internal code +---- Read Before Using -----------------------------------------------+ |IMPORTANT | | | |YOU ACCEPT THE TERMS OF THIS IBM LICENSE AGREEMENT FOR MACHINE CODE BY YOUR USE OF THE HARDWARE PRODUCT OR MACHINE CODE. PLEASE READ THE | |AGREEMENT CONTAINED IN THIS BOOK BEFORE USING THE HARDWARE PRODUCT.SEE IBM agreement for licensed internal code. | | | +----------------------------------------------------------------------+ You accept the terms of this Agreement(3) by your initial use of a machine that contains IBM Licensed Internal Code (called "Code"). These terms apply to Code used by certain machines IBM or your reseller specifies (called "Specific Machines"). International Business Machines Corporation or one of its subsidiaries ("IBM") owns copyrights in Code or has the right to license Code. IBM or a third party owns all copies of Code, including all copies made from them. If you are the rightful possessor of a Specific Machine, IBM grants You a license to use the Code (or any replacement IBM provides) on, or in conjunction with, only the Specific Machine for which the Code is provided. IBM licenses the Code to only one rightful possessor at a time. Under each license, IBM authorizes you to do only the following: 1. execute the Code to enable the Specific Machine to function According to its Official Published Specifications (called "Specifications"); 2. make a backup or archival copy of the Code (unless IBM makes one available for your use), provided you reproduce the copyright notice and any other legend of ownership on the copy. You may use the copy only to replace the original, when necessary; and 3. execute and display the Code as necessary to maintain the Specific Machine. You agree to acquire any replacement for, or additional copy of, Code directly from IBM in accordance with IBM's standard policies and practices. You also agree to use that Code under these terms. You may transfer possession of the Code to another party only with The transfer of the Specific Machine. If you do so, you must 1) destroy All your copies of the Code that were not provided by IBM, 2) either Give the other party all your IBM-provided copies of the Code or Destroy them, and 3) notify the other party of these terms. IBM licenses the other party when it accepts these terms. These terms apply to all Code you acquire from any source. Your license terminates when you no longer rightfully possess the Specific Machine. Actions you must not take: You agree to use the Code only as authorized above. You must not do, For example, any of the following: 1. Otherwise copy, display, transfer, adapt, modify, or distribute The Code (electronically or otherwise), except as IBM may authorize In the Specific Machine's Specifications or in writing to you; 2. Reverse assemble, reverse compile, or otherwise translate the Code unless expressly permitted by applicable law without the possibility of contractual waiver; 3. Sublicense or assign the license for the Code; or 4. Lease the Code or any copy of it. ------------------------------------------------------------------------------- 6.0 Trademarks and service marks The following terms are trademarks of the International Business Machines Corporation in the United States, or other countries, or both: AIX AS/400 Enterprise Storage Server HACMP/6000 IBM IBM logo iSeries Netfinity NetVista Operating System/400 pSeries RS/6000 Seascape SP System/360 System/370 System/390 The eServer Logo Versatile Storage Server xSeries zSeries z/Architecture z/OS Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation. Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Other company, product, and service names may be trademarks or service marks of others. ------------------------------------------------------------------------------- (C) Copyright IBM Corporation 2000 - 2018. All rights reserved.