FIRMWARE CHANGE HISTORY
-----------------------
Lenovo RackSwitch G8264CS Version 8.2.3.0 (Released July 2015)
** Changes since the 8.2.3.1 release **

Enhancements:
none

Changes:
none

Fixes:

- xHMC would not receive non-SAL(security audit log) SNMP trap notifications 
  from the switch.
  (LV307224)

- Switch traps were sent in octect format to xHMC as opposed to human readable strings.
  (LV307656)

- Users were not able to use the string “MGT1” in any alias command when the base 
  license is installed in the switch.
  (LV307682)

- The mapping between local and remote ports is incorrect when using standard LLDP MIBs. 
  The same is not true for private LLDP mibs (lldpInfoRemoteDevicesTable).
  (XB299432/LV311281)

- Inserting an unsupported transceiver could cause port link down to remain even after 
  inserting a supported DAC cable.
  (LV310839)

- VLAG failover due to primary switch being reloaded may incorrectly cause the 
  secondary switch to error disable its VLAG ports.  This may happen when the 
  healthcheck interface port number is higher than that of the ISL interface 
  port number.
  (LV308603)

- Extend the ability  of the command  "[no] snmp-server link-trap  port <port#> enable" 
  to disable/enable link-trap for multiple interfaces.
  (LV302420)

- Conifguration commands for management ports would be incorrectly included in 
  switch configuration, when an exsiting VLAN with member ports is configured 
  as Management VLAN. This would cause the switch configuration to be rejected 
  upon reboot with errors printed on the console.
  (LV310485, LV307915, LV307775)

- Extended support for Telco transceivers.Includes support for temperature range checking
  and warning messages upon insertion and crossing temperature thresholds.

- Fixed OpenSSL vulnerabilities as reported in CVE Advisories  CVE-2015-0286 (ASN1_TYPE_cmp).

================================================================================
Lenovo RackSwitch G8264CS Version 8.2.3.1