Readme file for IBM® Spectrum LSF 10.1 Fix 602138
Abstract
P105139. Fix to allow the lim daemon to start when running the lsadmin limstartup command immediately after running the lsadmin limstartup command.
Description
Readme documentation for IBM® Spectrum LSF 10.1 Fix 602138 including installation-related instructions, prerequisites and co-requisites, and list of fixes.
This fix addresses the following issue:
When a user runs the lsadmin limstartup command immediately after running the lsadmin limstartup command, the new lim process is unable to start.
Note: Install Fix 602128 before installing this fix.
Readme file for: IBM® Spectrum LSF
Product or component release: 10.1
Update name: Fix 602138
Fix ID: LSF-10.1-build602138
Publication date: 25 Sept 2024
Contents
1. List of fixes
2. Download location
3. Product or components affected
4. System requirements
5. Installation and configuration
6. List of files
7. Product notifications
8. Copyright and trademark information
1. List of fixes
P105139
2. Download locations
Download fix 602138 from the following location: https://www.ibm.com/support/fixcentral
3. Product or components affected
Affected product or components include:
LSF/lim
LSF/lsload
LSF/lshosts
4. System requirements
linux2.6-glibc2.3-x86_64
linux3.10-glibc2.17-x86_64
5. Installation and configuration
Before you install
LSF_TOP=Full path to the top-level installation directory of LSF.
1. You must have LSF 10.1 Fix Pack 12 or later installed before installing this fix. Download Fix Pack 12 or later from IBM Fix Central (https://www.ibm.com/support/fixcentral).
2. Starting in LSF 10.1 Fix Pack 13, the default values of the following three GPU parameters are changed to:
LSF_GPU_AUTOCONFIG=Y
LSB_GPU_NEW_SYNTAX=extend
LSF_GPU_RESOURCE_IGNORE=Y
If you have Fix Pack 13 installed, and these GPU parameters are not configured in the lsf.conf configuration file, the default values will be used, and the parameters already configured in the lsf.conf file will not be affected.
If you want to keep the former GPU behavior, and if any of the three parameters are missing in the lsf.conf configuration file, you must explicitly configure the following default settings that are defined in Fix Pack 12 or earlier:
LSF_GPU_AUTOCONFIG=N
LSB_GPU_NEW_SYNTAX=N
LSF_GPU_RESOURCE_IGNORE=N
3. If you are using the lsfd.service file from Fix Pack 14 or Fix build601849, make sure you installed Fix build602067. You can download the LSF fix from https://www.ibm.com/support/fixcentral. Search for build602067.
4. Log on to the LSF management host as root.
5. Set the LSF cluster environment:
- For csh or tcsh: % source LSF_TOP/conf/cshrc.lsf
- For sh, ksh, or bash: $ . LSF_TOP/conf/profile.lsf
Installation steps
1. Go to the install directory of the fix: cd $LSF_ENVDIR/../10.1/install/
2. Copy the fix file to the install directory: $LSF_ENVDIR/../10.1/install/
3. Run patchinstall: ./patchinstall <fix>
After you install
1. Log on to the LSF management host as the LSF cluster primary administrator and set the LSF cluster environment.
2. Run lsadmin limrestart all
Uninstallation
1. Log on to the LSF management host as root and set the LSF cluster environment.
2. Go to the install directory of the fix: cd $LSF_ENVDIR/../10.1/install/
3. Run ./patchinstall -r <fix>
4. Log on to the LSF management host as the LSF cluster primary administrator and set the LSF cluster environment.
5. Run lsadmin limrestart all
6. List of files
lim
lsload
lshosts
7. Product notifications
To receive information about product solution and fix updates automatically, subscribe to product notifications on the My notifications page (www.ibm.com/support/mynotifications) on the IBM Support website (support.ibm.com). You can edit your subscription settings to choose the types of information you want to get notification about, for example, security bulletins, fixes, troubleshooting, and product enhancements or documentation changes.
8. Copyright and trademark information
©Copyright IBM Corporation 2024
U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
IBM®, the IBM logo, and ibm.com® are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.