Readme file for IBM® Spectrum LSF 10.1 Fix 602126
Abstract
P105193. This fix enhances LSF global job IDs to include hybrid job ID clusters.
Description
Readme documentation for IBM Spectrum LSF 10.1 Fix 602126 including installation-related instructions, prerequisites and co-requisites, and list of fixes.
This fix addresses the following issue:
The LSF global job ID feature will prevent jobs without the proper job index from running on the execution cluster.
This fix is enabled by default. If you would like LSF to continue to prevent jobs without the proper job index from running on the execution cluster, set MC_STRICT_JOBID_CHECKING=Y in the file lsb.params on the cluster.
Readme file for: IBM® Spectrum LSF
Product or component release: 10.1
Update name: Fix 602126
Fix ID: LSF-10.1-build602126
Publication date: 31 July 2024
Contents
1. List of fixes
2. Download location
3. Product or components affected
4. System requirements
5. Installation and configuration
6. List of files
7. Product notifications
8. Copyright and trademark information
1. List of fixes
P105193
2. Download locations
Download Fix 602126 from the following location: https://www.ibm.com/support/fixcentral
3. Product or components affected
Affected product or components include:
LSF/mbatchd
LSF/mbschd
LSF/ebrokerd
LSF/bhosts
LSF/bjobs
LSF/lsclusters
LSF/lim
LSF/bparams
LSF/lshosts
LSF/lsload
4. System requirements
linux2.6-glibc2.3-x86_64
linux3.10-glibc2.17-x86_64
5. Installation and configuration
Before you install
LSF_TOP is the full path to the top-level installation directory of LSF.
1. Before you apply this fix, ensure that you installed LSF 10.1 Fix Pack 12 or later.
2. Starting
in LSF 10.1 Fix Pack 13, the default values of the following three GPU
parameters are changed to:
LSF_GPU_AUTOCONFIG=Y
LSB_GPU_NEW_SYNTAX=extend
LSF_GPU_RESOURCE_IGNORE=Y
If you have Fix Pack 13 installed, and these above GPU parameters not
configured in the lsf.conf
configuration file will take the default values. The parameters already
configured in the lsf.conf file
will not be affected.
If you want to keep the former GPU behavior, and if any of the three
parameters are missing in the lsf.conf
configuration file, you must explicitly configure the following default
settings that are defined in Fix Pack 12 or earlier:
LSF_GPU_AUTOCONFIG=N
LSB_GPU_NEW_SYNTAX=N
LSF_GPU_RESOURCE_IGNORE=N
3. If you are using the lsfd.service file from Fix Pack 14 or Fix build601849, make sure you Fix build602067. You can download the LSF fix from https://www.ibm.com/support/fixcentral. Search for build602067. Contact IBM LSF Support if you have any questions or problems with installing build602067.
3. Log on to the LSF management host as the LSF primary administrator.
4. Set
your environment:
-For csh or tcsh: % source LSF_TOP/conf/cshrc.lsf
-For sh, ksh,
or bash: $ . LSF_TOP/conf/profile.lsf
Installation steps
1.
Log on to the LSF management host as the root
user and set your environment:
-For csh or tcsh: % source LSF_TOP/conf/cshrc.lsf
-For sh, ksh, or bash: $ . LSF_TOP/conf/profile.lsf
2. Go to the install directory: cd $LSF_ENVDIR/../10.1/install/
3. Copy the fix file to the install directory: $LSF_ENVDIR/../10.1/install/
4. Run patchinstall: ./patchinstall <fix>
After you install
1. Log on to the LSF management host as the LSF primary administrator and set your environment:
-For csh or tcsh: % source LSF_TOP/conf/cshrc.lsf
-For sh, ksh, or bash: $ . LSF_TOP/conf/profile.lsf
2. Run lsadmin limrestart all
3. Run badmin mbdrestart -s
Uninstallation
1. Log on to the LSF management host as the root user and set your environment:
-For csh or tcsh: % source LSF_TOP/conf/cshrc.lsf
-For sh, ksh, or bash: $ . LSF_TOP/conf/profile.lsf
2. Go to the install directory: cd $LSF_ENVDIR/../10.1/install/
3. Run ./patchinstall -r <fix>
4. Log on to the LSF management host as the LSF primary administrator and set your environment:
-For csh or tcsh: % source LSF_TOP/conf/cshrc.lsf
-For sh, ksh, or bash: $ . LSF_TOP/conf/profile.lsf
5. Run lsadmin limrestart all
6. Run badmin mbdrestart -s
6. List of files
The following components in all Linux and UNIX packages:
LSF/mbatchd
LSF/mbschd
LSF/ebrokerd
LSF/bhosts
LSF/bjobs
LSF/lsclusters
LSF/lim
LSF/bparams
LSF/lshosts
LSF/lsload
7. Product Notifications
To receive information about product solution and fix updates automatically, subscribe to product notifications on the My notifications page (www.ibm.com/support/mynotifications) on the IBM Support website (support.ibm.com). You can edit your subscription settings to choose the types of information you want to get notification about, for example, security bulletins, fixes, troubleshooting, and product enhancements or documentation changes.
8. Copyright and Trademark Information
©Copyright IBM Corporation 2024
U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
IBM®, the IBM logo, and ibm.com® are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.