Readme for 601831

Readme file for IBM® Spectrum LSF 10.1 Fix 601831

Abstract

P105014. Add a parameter to print job operations for the bkill, bstop, or bresume commands as messages to STDERR or STDOUT.

Description

Readme documentation for IBM Spectrum LSF 10.1 Fix 601831 including installation-related instructions, prerequisites and co-requisites, and list of fixes.

This fix addresses the following issue:There is a need for printing job operation progress for the bkill, bstop, or bresume commands.

This fix adds the following parameter for the lsf.conf file, to control the Job <jobid>: Operation is in progress message to STDERR or STDOUT:

LSB_JOB_IN_PROGRESS_MSG_TO_STDERR

Syntax

LSB_JOB_IN_PROGRESS_MSG_TO_STDERR=Y | N

Description

When LSB_JOB_IN_PROGRESS_MSG_TO_STDERR=Y, print the Job <jobid>: Operation is in progress message to STDERR when running the bkill, bstop, or bresume commands with a job array. Otherwise print the message to STDOUT.

Default

Readme file for: IBM® Spectrum LSF

Product or component release: 10.1

Update name: Fix 601831

Fix ID: LSF-10.1-build601831

Publication date: 13 December 2023

Contents

1. List of fixes

2. Download location

3. Product or components affected

4. System requirements

5. Installation and configuration

6. List of files

7. Product notifications

8. Copyright and trademark information

1. List of fixes

P105014

2. Download locations

Download Fix 601831 from the following location: https://www.ibm.com/support/fixcentral

3. Product or components affected

Affected product or components include:

LSF/bkill

LSF/bstop

LSF/bresume

4. System requirements

linux2.6-glibc2.3-x86_64

linux3.10-glibc2.17-x86_64

5. Installation and configuration

Before you install

LSF_TOP is the full path to the top-level installation directory of LSF.

1. Before you apply this fix make sure that you installed LSF 10.1 Fix Pack 12 or above. You can Download LSF 10.1 Fix Pack 12 from https://www.ibm.com/support/fixcentral. Search for build600488. Contact IBM LSF Support if you have any questions or problems with installing Fix Pack 12.

2. Starting in LSF 10.1 Fix Pack 13, the default values of the following three GPU parameters are changed to:
LSF_GPU_AUTOCONFIG=Y
LSB_GPU_NEW_SYNTAX=extend
LSF_GPU_RESOURCE_IGNORE=Y

If you have Fix Pack 13 installed, the above GPU parameters not configured in the lsf.conf configuration file will take the default values above, and the parameters already configured in the lsf.conf file will not be affected.

If you want to keep the former GPU behavior, and if any of the three parameters are missing in the lsf.conf configuration file, you must explicitly configure the following default settings that are defined in Fix Pack 12 or earlier:
LSF_GPU_AUTOCONFIG=N
LSB_GPU_NEW_SYNTAX=N
LSF_GPU_RESOURCE_IGNORE=N

3. Log on to the LSF management host as the LSF primary administrator.

4. Set your environment:
-For csh or tcsh: % source LSF_TOP/conf/cshrc.lsf
-For sh, ksh, or bash: $ . LSF_TOP/conf/profile.lsf

Installation steps

1. Log on to the LSF management host as root and set the LSF cluster environment

2. Go to the install directory: cd $LSF_ENVDIR/../10.1/install/

3. Copy the fix file to the install directory: $LSF_ENVDIR/../10.1/install/

4. Run patchinstall: ./patchinstall <fix>

Uninstallation

1. Log on to the LSF management host as the LSF cluster primary administrator and set the LSF cluster environment

2. Log on to the LSF management host as root and set the LSF cluster environment

3. Go to the patch install directory: cd $LSF_ENVDIR/../10.1/install/

4. Run ./patchinstall -r <patch>

6. List of files

The following components in all Linux and Unix packages:

LSF/bkill

LSF/bstop

LSF/bresume

7. Product Notifications

To receive information about product solution and fix updates automatically, subscribe to product notifications on the My notifications page (www.ibm.com/support/mynotifications) on the IBM Support website (support.ibm.com). You can edit your subscription settings to choose the types of information you want to get notification about, for example, security bulletins, fixes, troubleshooting, and product enhancements or documentation changes.

8. Copyright and Trademark Information

U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

IBM®, the IBM logo, and ibm.com® are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.