IBM CMIS Version 3.0.7 Interim Fix 4 Readme

This Readme document contains information about the installation of this package and about restrictions in support of IBM CMIS, Version 3.0.7 Interim Fix 4.

This interim fix contains new features and fixes.

Readme file for:

IBM CMIS.

Product or component release:

Version 3.0.7.0

Update name:

Interim Fix 4

IBM CMIS build number:

cmis-installer307.004.081

IBM CMIS Fix ID:

Publication date:

December 15, 2023

Last modified date:

December 15, 2023

Additional documentation for IBM CMIS 3.0.7.0 can be found at : https://www.ibm.com/docs/en/content-navigator/3.0.x?topic=navigator-planning-installing-configuring-ecm-cmis

New Features

Interim Fix 4

Interim Fix 3

Interim Fix 2

Interim Fix 1

Known problems, issues, and limitations

Known problems, restrictions, and solutions that affect administration and usage of interim fixes are documented as techdocs in the product support knowledge base. Use the following link to query the product support knowledge base by searching for the product and version number: https://www.ibm.com/support/home.

Prerequisites for Version 3.0.7 Interim Fix 4

For complete details about the hardware and software requirements for IBM Content Navigator, IBM ECM CMIS v3.0.7 see Software Product Compatibility Reports.

Installing or Updating IBM CMIS Version 3.0.7 Interim Fix 4

The following information and steps apply to IBM CMIS. To install the interim fix, perform the steps below using the interim fix executable. When you install an interim fix, you can run the installation wizard or run a silent installation. This interim fix can be installed as an update to IBM CMIS Version 3.0.7.0.

The interim fix installation program updates the files in the directory where IBM CMIS is installed. After the installation program completes successfully, restart the web application server and redeploy the IBM CMIS web application to apply the changes from the interim fix.

For more information about installing IBM CMIS, Version 3.0.7.0, see https://www.ibm.com/docs/en/content-navigator/3.0.x?topic=navigator-planning-installing-configuring-ecm-cmis

To install IBM CMIS, Version 3.0.7 Interim Fix 4:

  1. Back up your current installation of IBM CMIS.
  2. Ensure that the IBM CMIS Configuration and Deployment Tool is closed.
  3. Log in to the IBM CMIS server with the IBM CMIS installer account.
  4. Install the interim fix by running the installation wizard or by running a silent installation:
    Important: Do not enter line breaks in the command that you enter to start the installation program.

    AIX

    At a command prompt, change to the directory where you downloaded the interim fix and enter one of the following commands:

    Linux

    At a command prompt, change to the directory where you downloaded the interim fix and enter one of the following commands:

    Linux for System z

    At a command prompt, change to the directory where you downloaded the interim fix and enter one of the following commands:

    Windows

    At a command prompt, change to the directory where you downloaded the interim fix and enter one of the following commands:

  5. Open the IBM CMIS Configuration and Deployment tool, click File > Open Deployment Profile, select the target deployment profile and click Open.

  6. Run the "Configure IBM CMIS for <repository type>" task. For more instructions, see the topic, https://www.ibm.com/docs/en/content-navigator/3.0.x?topic=cmis-configuring-deploying-ecm-web-applications.

  7. Run the "Build the Web Application" task. For more instructions, see the topic, https://www.ibm.com/docs/en/content-navigator/3.0.x?topic=cmis-configuring-deploying-ecm-web-applications.

  8. Run the "Deploy the Web Application" task. For more instructions, see the topic, https://www.ibm.com/docs/en/content-navigator/3.0.x?topic=cmis-configuring-deploying-ecm-web-applications.

  9. Stop the IBM CMIS web application server.

  10. Clear the application server cache:

  11. Start the IBM CMIS web application server.

  12. Verify that the correct version of the software is deployed to the web application server. For more information, see the topic, "Verifying your deployment" in the information center: https://www.ibm.com/docs/en/content-navigator/3.0.x?topic=deployment-verifying-your-ecm-cmis.

Removing the interim fix

When you uninstall the interim fix, you also uninstall IBM CMIS. The interim fix for IBM CMIS uninstallation program removes the program and all applied fixes. You cannot remove only the interim fix.

Fixes included in IBM CMIS Version 3.0.7 Interim Fix 4

This fix includes content from previous IBM CMIS Version 3.0.7 interim fixes:


IO29338 Error 'DGL3764A’ - Privilege already exists in privilege set' occurs sometimes during high load. 
(IBM CMIS for IBM Content Manager users) The error, 'Error, 'DGL3764A: Privilege already exists in privilege set' can occur sometimes, under high load. The error especially occurs if a large number of requests are submitted, before IBM CMIS is fully started. With this fix, the possibility of occurrence of this error is greatly minimised through thread synchronization. However, it is advised to submit requests to IBM CMIS only after it is fully started to avoid receiving this error.

IO29357 Parameter 'allowedRepositories' in cmis.properties file is documented incorrectly. 
(IBM CMIS users) The 'allowedRepositories' parameter in the cmis.properties file is documented incorrectly. The repositories listed for this parameter must be space delimited instead of being comma delimited.

PJ47198 Incorrect error, 'CBR_INCOMPLETE_CONFIG' is displayed in the logs along with the correct error.  (IBM CMIS for IBM FileNet Content Manager users) An incorrect error, CBR_INCOMPLETE_CONFIG, is displayed in the logs along with the correct error, when an incorrect query is attempted to be executed. With this fix, unnecessary errors are not displayed and only valid errors are displayed when invalid queries are submitted. A more comprehensive fix will be made available in the next interim fix.

Copyright and trademark information

http://www.ibm.com/legal/copytrade.shtml

Notices

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

Other company, product, or service names may be trademarks or service marks of others.

THIRD-PARTY LICENSE TERMS AND CONDITIONS, NOTICES AND INFORMATION

The license agreement for this product refers you to this file for details concerning terms and conditions applicable to third party software code included in this product, and for certain notices and other information IBM must provide to you under its license to certain software code. The relevant terms and conditions, notices and other information are provided or referenced below. Please note that any non-English version of the licenses below is unofficial and is provided to you for your convenience only. The English version of the licenses below, provided as part of the English version of this file, is the official version.

Notwithstanding the terms and conditions of any other agreement you may have with IBM or any of its related or affiliated entities (collectively "IBM"), the third party software code identified below are "Excluded Components" and are subject to the following terms and conditions: