IBM Spectrum LSF Explorer V10.2.0.14
Fix 601813 Readme
Abstract
This fix
ensures that the pendingreason loader does not core dump
Description
Readme documentation
for IBM Spectrum LSF Explorer V10.2.0 Fix including installation-related
instructions, prerequisites and co-requisites, and list of fixes.
This fix resolves the following issue:
The pendingreason loader core dump.
Readme
file for: IBM® Spectrum
LSF Explorer
Product/Component
Release: 10.2.0.14
Update
Name: Fix 601813
Fix ID: explorer-10.2.0.14-build601813
Publication
date: Nov. 28 2023
Last
modified date: Nov. 28,
2023
Contents
1.
List of fixes
1.
List of fixes
P105002
2.
Download location
Download from the following location: http://www.ibm.com/eserver/support/fixes/
3.
Product
notifications:
To receive information about product solution and patch
updates automatically, subscribe to product notifications on the My
notifications page http://www.ibm.com/support/mynotifications/ on the IBM
Support website (http://support.ibm.com). You can edit your subscription
settings to choose the types of information you want to get notification about,
for example, security bulletins, fixes, troubleshooting, and product
enhancements or documentation changes.
4.
Products or
components affected
Explorer Node
5.
System
requirements
·
Linux-x86_64
6.
Installation and
configuration
1.
The following
steps assume that IBM Spectrum LSF Explorer is installed in /opt/ibm. Replace with your actual installation directory.
2.
6.1 Before installation
1.
Log on to each IBM Spectrum LSF
Explorer Node hosts as root.
2.
Set your IBM Spectrum LSF Explorer
environment.
For csh or tcsh:
% source /opt/ibm/lsfsuite/ext/cshrc.platform
For sh, ksh, or bash:
$ . /opt/ibm/lsfsuite/ext/profile.platform
3.
Determine the location of your
existing IBM Spectrum LSF Explorer installation.
#rpm -q --queryformat
"%{INSTPREFIXES}\n" lsf-explorer-node
4.
Stop all IBM Spectrum LSF Explorer
services.
perfadmin stop all
5.
Back up your existing installation.
For example:
#cp -rfp /opt/ibm /opt/ibm.bak
3.
6.2 Installation steps for IBM Spectrum LSF Explorer V10.2.0.
Note: 1. This patch is only for LSF Explorer
V10.2.0. If you are using other versions, you must first migrate to V10.2.0
before applying this patch.
1.
Extract explorer10.2.0.14_node_linux-x64.tar.gz.
tar -xzvf explorer10.2.0.14_node_linux-x64.tar.gz
2.
As root, log on to each IBM Spectrum
LSF Explorer Node 10.2 host.
3.
Set your IBM Spectrum LSF Explorer
environment.
For csh or tcsh:
% source /opt/ibm/lsfsuite/ext/cshrc.platform
For sh, ksh, or bash:
$ . /opt/ibm/lsfsuite/ext/profile.platform
4.
Configure the install.config
file as the same when installing Spectrum LSF Explorer Node 10.2.0.14.
5.
Install the pack
./ExplorerNodeInstaller.sh -f install.config
6.
Start IBM Spectrum LSF Explorer
Node.
perfadmin start all
7.
Uninstallation
1.
7.1 Before uninstallation
Stop all IBM Spectrum LSF Explorer services:
perfadmin stop all
2.
7.2 Roll back the fix
The following steps assume that IBM Spectrum
LSF Explorer is installed in the /opt/ibm directory.
Replace this with your actual installation directory.
1.
Determine the location of your
existing IBM Spectrum LSF Explorer installation.
#rpm -q --queryformat
"%{INSTPREFIXES}\n" lsf-explorer-node
2.
Re-install RPM file lsf-perf-10.2.0.14-19111812.x86_64.rpm
3.
Start IBM Spectrum LSF Explorer Node
perfadmin start all
8.
List of files
$PERF_TOP/lsf/10.0/linux-x86_64/lib/libpendingreason.so
9.
Copyright and
trademark information
©Copyright IBM Corporation 2023
U.S. Government Users Restricted Rights - Use, duplication or disclosure
restricted by GSA ADP Schedule Contract with IBM Corp.
IBM®, the IBM logo and ibm.com® are trademarks of International Business
Machines Corp., registered in many jurisdictions worldwide. Other product and
service names might be trademarks of IBM or other companies. A current list of
IBM trademarks is available on the Web at "Copyright and trademark
information" at http://www.ibm.com/legal/copytrade.shtml