IBM Daeja ViewONE, 5.0.9 iFix 7 Readme

This Readme document contains information about the installation of this package and about restrictions in support of IBM Daeja ViewONE, Version 5.0.9 iFix 7

Readme for: IBM Daeja ViewONE

Product or component release: Version 5.0.9

Update name: iFix 7

Prerequisites before installing IBM Daeja ViewONE, Version 5.0.9 iFix 7

You must have IBM Daeja ViewONE, Version 5.0.9 installed.

Before you install IBM Daeja ViewONE, Version 5.0.9 iFix 7:

Installing IBM Daeja ViewONE, 5.0.9 iFix 7

IBM Daeja ViewONE, 5.0.9 iFix 7 is provided as a compressed file containing the files that are needed to update Version 5.0.9 for all supported platforms.

To install this package:

  1. Unzip the compressed file into the directory where IBM Daeja ViewONE, Version 5.0.9 was installed. This action overwrites all the files that need updates in the client/v1files directory and the server/WEB-INF/lib directory.
  2. As this package contains all the files required for all platforms, you can remove the files that are included for platforms that are not relevant to your environment. Change to the server/WEB-INF/lib directory under the Daeja ViewONE installation directory and delete the platform specific jars that are not relevant.

    There are platform specific jar files:

  3. Make a backup of the Daeja ViewONE 5.0.9 files in the relevant locations in your web application server. For the server files that will be the web application's WEB-INF/lib directory. For the client, it will be where the package client files were copied to. For example v1files directory in the web application.

  4. Copy the client and server files into the relevant places in your web application and ensure that the application is deployed as per your web app server specific requirements.
  5. Verify that the correct version of IBM Daeja ViewONE is deployed to the web application server. This can be done by displaying the About Box in Daeja ViewONE Virtual by clicking on the ViewONE logo in the bottom right corner. Verify that the version number 5.0.9 iFix 7 is listed at the bottom of the About Box.

Note: To upgrade to iFix 7, please ensure that both the client and the server are updated.

Removing IBM Daeja ViewONE, 5.0.9 iFix 7

If you want to remove the iFix 7 from your installation and revert back to the original 5.0.9 version, you need to replace the files in you installation directories with the backed up files, then copy the files into the correct places in your web application server.

If you use the IBM Daeja ViewONE Version 5.0.9 uninstallation program to remove IBM Daeja ViewONE 5.0.9 and the iFix 7 from your system, then some of the files may be left on your file system and you will need to remove them manually.

Configuring the Viewer

IBM Daeja ViewONE comes with a Toolkit rich in capabilities that enables advanced integration and customization of the viewer by using HTML parameters and JavaScript API methods. For more information on the developer’s guide refer to:

IBM Daeja ViewONE 5.0.9 Virtual Developer's Guide

Fixes in IBM Daeja ViewONE, 5.0.9 iFix 7

The following APARs are fixed in this product release for customers who have direct entitlement to IBM Daeja ViewONE. If you are using IBM Daeja ViewONE made available to you as part of another IBM product, these fixes might not be available immediately. Contact IBM Support for information about IBM products that integrate IBM Daeja ViewONE.

Latest iFixes and readmes for this release: https://www.ibm.com/support/fixcentral/swg/selectFixes?parent=Enterprise%20Content%20Management&product=ibm/Other+software/Daeja+ViewONE+Virtual&release=5.0.9&platform=All&function=all


IO28236 SAVE BUTTON ON THE STICKY NOTE DIALOG IS NOT DISABLED WHEN ANNOTATEEDIT PARAMETER IS SET TO FALSE

When the parameter 'annotateEdit' is set to 'false', the OK button (also known as the 'Save' button) on the sticky notes dialog is not disabled.

Affected users: IBM Daeja ViewONE Virtual users


IO28264 CLICKING ON AREA NEAR THE THUMBNAIL IN THUMBNAILS PANE, THE FOCUS REMAINS EVEN AFTER MOVING TO ANOTHER PAGE

Click on thumbnail pipe when the document is opened in any of Thumbnail view mode, the immediate next thumbnail cell gets highlighted on click of pipe. It stays highlighted even after current page is changed in the main page view.

Affected users: IBM Daeja ViewONE Virtual users


IO28314 RTF WRAPPED MSG FILE IS NOT FORMATTED PROPERLY IN SOME SCENARIOS

Email content not rendered properly for RTF wrapped .msg file.

Affected users: IBM Daeja ViewONE Virtual users


IO28384 BLANK PAGE SEEN FOR SOME PAGES WHEN LOADING LARGE TIFF DOCUMENTS IN THUMBS LEFT MODE AND SCROLLING ACROSS THE PAGES IN THE THUMBS VIEW PANEL

When viewing large TIFF Documents in thumbsleft mode and scrolling across the pages in thumbsview panel and clicking on a page renders blank page sometimes.

Affected users: IBM Daeja ViewONE Virtual users


IO28409 IMAGE IN A PARTICULAR PDF DOCUMENT IS BLURRED OR NOT RENDERED FULLY

Image in a particular PDF document is rendered blurry or is not rendered fully, only part of the image is displayed.

Affected users: IBM Daeja ViewONE Virtual users


IO28440 FORM FIELDS IN MICROSOFT WORD DOCUMENTS ARE NOT DISPLAYED IN VIEWER

Opening any Microsoft Word Document with Form fields, document is rendered with missing form fields.

Affected users: IBM Daeja ViewONE Virtual users


IO28465 BLANK THUMBNAILS SEEN FOR SOME PAGES WHEN LOADING LARGE TIFF DOCUMENTS IN THUMBS LEFT MODE AND SCROLLING ACROSS THE PAGES IN THE THUMBS VIEW PANEL

When large TIFF documents are opened in thumbs left mode and scrolled up and down in thumbs panel, we see blank thumbnail images.

Affected users: IBM Daeja ViewONE Virtual users



Fixes and Features released in previous iFixes and Fix Packs

IBM Daeja ViewONE 5.0.9 iFix 6

IO28201 MICROSOFT WORD DOCUMENTS WITH CHINESE CHARACTERS ARE NOT RENDERED CORRECTLY

Some chinese characters in Microsoft Word document are rendered as small square boxes instead of proper text when opened in the Viewer.

Affected users: IBM Daeja ViewONE Virtual users


IO28437 MAXIMUM THREAD COUNT REACHES ON THE SERVER WHILE RENDERING FEW TIFF DOCUMENTS

Viewer gets hung while rendering few TIFF documents and fails to perform any other operations. When this happens, the maximum thread count reaches on the server.

Affected users: IBM Daeja ViewONE Virtual users


IO28126 ERROR MESSAGE SEEN IN THE LOGS WHEN USING JAVASCRIPT API TO OPEN A BLANK DOCUMENT IN DOCBUILDER MODE

When we open a blank document in the docbuilder mode using ViewONE.openFile('about:blank', 0); Javascript API, an error message 'Failed to retrieve the document repository manager' is seen in the logs.

Affected users: IBM Daeja ViewONE Virtual users


IO28196 CHECK BOXES EMBEDDED IN TABLE IN MICROSOFT WORD DOCUMENT ARE MISALIGNED

MicroSoft Word document containing table of rows plus check boxes when viewed in the Viewer, the document is rendered with boxes misplaced when compared with text in same row of table.

Affected users: IBM Daeja ViewONE Virtual users


IO28244 SIGNATURE FIELD IS MISSING WHEN PDF DOCUMENT IS RENDERED ON CLIENT SIDE

Signature field present in the PDF document is not seen when the document is rendered on client side.

Affected users: IBM Daeja ViewONE Virtual users


IO28245 CONTENTS OF THE PDF DOCUMENT ARE NOT READABLE DUE TO MISSING FONT

Contents of the PDF Document are scattered and not readable when the document is rendered on client side.

Affected users: IBM Daeja ViewONE Virtual users


IO28250 CLICKING RAPIDLY THROUGH THUMBNAILS WILL SWITCH TO FULL PAGE VIEW WHEN THUMBNAILDEFAULTHEIGHT AND THUMBNAILDEFAULTWIDTH IS SET

Setting the 'thumbnailDefaultHeight' and 'thumbnailDefaultWidth' parameters and clicking on thumbnails in no particular order in thumbnail view mode causes the view mode to change to full page.

Affected users: IBM Daeja ViewONE Virtual users


IO28328 VIEWER HANGS AND DOES NOT DISPLAY ANY ERROR MESSAGE WHEN A CORRUPTED MULTI PAGE TIFF DOCUMENT IS OPENED

When page height of the first page in a tiff document is very less, the entire document is not rendered on the Viewer even though other pages have optimal height.

Affected users: IBM Daeja ViewONE Virtual users


IO28367 ISSUE WITH RENDERING RTF DOCUMENT WHICH IS SAVED AS .DOC

When trying to view a RTF document which is saved as .DOC, the following error occurrs.
Error : Unable to display document: Failed to load document, Status : Unrecognized file type application/msword

In order to render a RTF document which is saved as .DOC, please enable this parameter - "viewRTF" by setting it's value as "true".

Affected users: IBM Daeja ViewONE Virtual users


IO28389 UNABLE TO DOWNLOAD OR PRINT SOME PDF DOCUMENTS

Local save and/or Print operation can fail on few PDF documents which are created using non standard tools due to addition of redundant information in the header.

Affected users: IBM Daeja ViewONE Virtual users


Support the underline for text annotation in server side rendering route

The underline for text annotation is now supported for server side rendering route. This includes server side printing, redaction, and document builder areas.


Support the underline for text annotation in client side rendering route

The underline for text annotation is now supported for client side rendering route. This includes client side print (also known as embedded print)


IBM Daeja ViewONE 5.0.9 iFix 5

IO27814 PDF DOCUMENTS ARE RENDERED WITH BLACK BOXES BEHIND EACH LETTER IN GOOGLE CHROME BROWSER

Some text fields in the PDF documents are rendered with black boxes behind each letter when the viewer is launched in Google Chrome browser

Affected users: IBM Daeja ViewONE Virtual users


IO28014 SOME PDF FILES HAVE MISALIGNMENT WHERE COLUMNS ARE NOT ALIGNED PROPERLY

Some of the column data present in table format in certain PDF Files does not fit inside the table and shows misaligned.

Affected users: IBM Daeja ViewONE Virtual users


IO28018 SOME CHARACTERS(CZECH) DISPLAY AS GARBLED IN PDF DOCUMENTS

Some characters in the PDF document is displayed as garbled with some symbols.

Affected users: IBM Daeja ViewONE Virtual users


IO28091 SOME PDF FILES SHOWS ONLY A PROGRESS SPINNER WHEN TRYING TO RENDER IN THE VIEWER

Some PDF files fail to render in the viewer and shows only the progress spinner

Affected users: IBM Daeja ViewONE Virtual users


IO28174 ANNOTATIONS BEING CUT OFF IN PRINT

Annotation text cut happens when we zoom out 4 levels and ‘allowTextRubberband’ parameter is set to ‘false’.

Affected users: IBM Daeja ViewONE Virtual users


IO28175 PDF ANNOTATIONS ADDED WITH IPHONE NOT SHOWING IN THE VIEWER

When PDF files are opened in the Viewer, the PDF annotations added with iPhones are not showing.

Affected users: IBM Daeja ViewONE Virtual users


IO28233 ANNOTATIONSTAMPPROPERTIES<N> FAILS TO SET BORDER PROPERTY

AnnotationStamp fails to add stamp with borders when border property is added in parameter 'annotationStampProperties'.

Affected users: IBM Daeja ViewONE Virtual users


IO28333 MISALIGNMENT ISSUE WITH CERTAIN PDF DOCUMENTS IN THE VIEWER

Some of the text within the PDF file is misaligned and text content is extended outside the table border

Affected users: IBM Daeja ViewONE Virtual users


IO28408 PDF DOCUMENT IN VIEWER IS RENDERING PART OF THE IMAGE AND NOT RENDERING COMPLETE IMAGE

PDF document in viewer is rendering part of the image and not rendering the complete image.

Affected users: IBM Daeja ViewONE Virtual users


IO28428 PDF DOCUMENTS WITH EMBEDDED JPEG2000 DISPLAYS BLANK WHITE PAGE

When PDF document with embedded JPEG2000 is opened in the Viewer, we see a blank white page instead of the actual file contents.

Affected users: IBM Daeja ViewONE Virtual users


IBM Daeja ViewONE 5.0.9 iFix 4

IO28046 PPT DOCUMENT RENDERED SHOWS DIFFERENCES BETWEEN ARABIC FONTS,BACKGROUND & TEXT BOXES FROM THE ORIGINAL PPT

PPT document rendered shows differences between Arabic fonts, background and text boxes when compared to original PPT.

Affected users: IBM Daeja ViewONE Virtual users


IO28180 STICKY NOTE SUMMARY PAGE IS NOT PRINTED AND ONLY GRAY SQUARE IS SEEN WHEN "STICKY NOTE SUMMARY" OPTION IS CHECKED WHEN PRINTING DOCUMENT

When Printing a document with sticky note and "STICKY NOTE SUMMARY" option checked, the Sticky note Summary Page is not printed and only gray square is seen.

Affected users: IBM Daeja ViewONE Virtual users


IO28197 DOCUMENT LOADING SPINNER IS NOT CENTERED IN THE VIEWER PANE WHEN USING THE CARBON DESIGN PACAKAGE

During the document load process, the progress spinner is centered to the browser's height and width instead of the Viewer's height and width.

Affected users: IBM Daeja ViewONE Virtual users


IO28207 ENGLISH TEXT ANNOTATIONS ARE DISORIENTED WHEN THE IBM Content Navigator LANGUAGE IS CHANGED

Adding English annotation while the locale is set to few non-english languages in IBM Content Navigator chops the annotation content in the beginning and the text appears disoriented.

Affected users: IBM Daeja ViewONE Virtual users


IO28209 RTF DOCUMENT NOT RENDERING ON VIEWER

RTF Document not rendering on Viewer. The client is getting an error "Unable to display document: Failed to load document, status: Unrecognized file type application/rtf" while opening RTF files.

In order to render any RTF file on viewer, please enable this parameter - "viewRTF" by setting it's value as "true".

Affected users: IBM Daeja ViewONE Virtual users


IO28249 SOME EMAIL MESSAGES ARE RENDERING HEADER BUT MISSING THE BODY

In some of the email messages, where the HTML comments tags are not properly defined, the body of the email will not appear properly on the viewer

Affected users: IBM Daeja ViewONE Virtual users


IO28380 HORIZONTAL SCROLL BAR SEEN IN THE TEXT SEARCH RESULTS PANEL

This happens for some of the non-English Locales and makes the navigation across search results difficult.

Affected users: IBM Daeja ViewONE Virtual users


IO28381 CERTAIN GIF FILES ARE NOT VIEWABLE DUE TO RENDER ERROR

Viewer is unable to render few GIF files having large pixels. The progress spinner seen in the Viewer during the document load process would remain forever.

Affected users: IBM Daeja ViewONE Virtual users


IO28385 MSG FILE WITH HEADERS ADDED TO IDENTIFY EXTERNAL EMAILS FAIL TO OPEN IN VIEWER

Opening an MSG file with header added to identify external emails fails with following error 'Unable to display document: Failed to load document, status: Unable to parse HTML email content.'

Affected users: IBM Daeja ViewONE Virtual users


IO28391 MICROSOFT OFFICE WORD DOCUMENTS EDITED IN OFFICE ONLINE SERVER INTEGRATED WITH CONTENT NAVIGATOR RENDERS ONLY FEW PAGES AND NOT THE COMPLETE DOCUMENT

Opening a word document that is edited using Office Online Server integrated with Content Navigator renders only some pages in the Viewer, but not the complete document. Following error is shown in the logs
For input string: 'on' java.lang.NumberFormatException: at java.lang.NumberFormatException.forInputString(NumberFormatException.java:76).

Affected users: IBM Daeja ViewONE Virtual users


IBM Daeja ViewONE 5.0.9 iFix3

Security: Bouncy Castle third party library update

Due to a known security issue in the Bouncy Castle libraries, the bundled version of the library has been updated to version 1.67.

Affected users: IBM Daeja ViewONE Virtual users


IO27585 MICROSOFT POWERPOINT DOCUMENT LAYOUT IS DISTORTED WHEN VIEWING IN VIRTUAL

While viewing Microsoft PowerPoint document, we see the layout in document is distorted.

Affected users: IBM Daeja ViewONE Virtual users


IO28095 TEXT MISSING FROM EMBEDDED SHAPE IN WORD DOCUMENT

When viewing a word document containing multiple shapes with embedded text, some shapes are rendered with missing text.

Affected users: IBM Daeja ViewONE Virtual users


IO28096 WORD DOCUMENT RENDERS WITH MISSING WAVE SHAPE

When viewing a word document containing different shapes with embedded text, some shapes and text are missing.

Affected users: IBM Daeja ViewONE Virtual users


IO28142 THE OVERFLOW MENU PROPERTIES SELECTION BOX IS HIDDEN BEHIND ANY ADJACENT CONTENT ON THE PAGE

When the viewer does not take the full width of the browser, the overflow menu properties selection box is hidden behind any adjacent content on the page.

Affected users: IBM Daeja ViewONE Virtual users


IO28144 WHEN ANNOTATING A DOCUMENT WITH MIXED SIZED PAGES, ANNOTATIONS CAN CUT OFF DURING CREATION

When annotating a document with mixed sized pages, and zooming in on a page which is of a different size to the first, annotations can cut off during creation.

Affected users: IBM Daeja ViewONE Virtual users


IO28146 TEXT ANNOTATIONS ADDED BY ADDANNOTATION() JAVASCRIPT METHOD ARE DISPLAYED LARGER THAN THE SIZE IN FILENET SYSTEMS

This issue is only seen when working with a FileNet repository and when annotations are added programmatically to fulfill a custom workflow. This is typically done using something like viewONE.addAnnotation('[TEXT]<P>PAGE=1<P>X=100<P>Y=100<P>Text=test<P>FONTHEIGHT=32<P>');

Affected users: IBM Daeja ViewONE Virtual users


IO28218 EMAIL MSG DOCUMENT FAILS TO RENDER DUE TO INVALID CHARACTERS IN COMMENTS

Opening an email MSG document fails with following error 'Unable to display document: Failed to load document, status: Unable to parse HTML email content.'

Affected users: IBM Daeja ViewONE Virtual users


IO28246 SUPPORT FOR DISPLAYING DOUBLE-LINE STRIKETHROUGH AS SINGLE-LINE STRIKETHROUGH IN WORD DOCUMENT

When viewing a word document any text with double-line strikethrough is now displayed as single-line strikethrough.

Affected users: IBM Daeja ViewONE Virtual users


IO28339 PERMANENT REDACTIONS FOR CM8 DOES NOT WORK ON IBM CONTENT NAVIGATOR

This issue is only seen when working with a CM8 repository and when the document has been added from the search view.

Affected users: IBM Daeja ViewONE Virtual users


Support of Underline for Text Annotation via the StartAnnotation() JS method

The JavaScript method startAnnotation now supports a new property value of underline. This property allows for new text annotations to be drawn with an underline.

The underline property can be included in the JSON properties argument passed into startAnnotation and can take a boolean of true or false.

The following is an example of the startAnnotation method with the underline property included in the JSON input:

viewone.startAnnotation('TEXT', false, '{'underline':'true'}')


New Underline UI Button Added to Text and Soild Text Annotations Toolbar

The Text and Solid Text annotation types in the Carbon Design Package has an additional UI button for adding/removing the Underline property.


Improved Validation of the Properties Argument for JavaScript API Method startAnnotation

The JavaScript API method startAnnotation has additional functionality to inform the user of invalid inputs in the properties argument. For the following invalid arguments startAnnotation will return false. With the traceAnnotation Trace Setting selected, the following invalid arguments will give the corresponding error output.

Supplied property with an invalid name
The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON) with an invalid property name:
{
"undreline":true
}

Error message: "The property "undreline" is invalid."

Supplied multiple properties with invalid names
The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON) with multiple invalid property names:
{
"undreline":true,
"alingment":"right"
}

Error message: "The properties "alingment", "undreline" are invalid."

Valid property supplied which is incompatible with given annotation type
The following is an example of the startAnnotation method usage with incompatible properties in the properties argument:
viewone.startAnnotation('SOLIDTEXT', false, '{"arrowheadsize":30}')
Error message: "The property arrowheadsize is not compatible with the SOLIDTEXT annotation type."

Multiple valid properties supplied which are incompatible with given annotation type
The following is an example of the startAnnotation method usage with multiple incompatible properties in the properties argument:
viewone.startAnnotation('LINE', false, '{"underline":true, "alignment":"left"}')
Error messages:
"The property alignment is not compatible with the the LINE annotation type."
"The property underline is not compatible with the LINE annotation type."

Boolean property was not supplied with a boolean value
The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON) with an invalid boolean entry for a boolean property value:
{
"underline":"rue"
}

Error message: "The value "rue" is not valid for the underline property. Accepted values are "true" or "false"."

Integer property was not supplied with an Integer value
The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON) with an invalid integer entry for an integer property value:
{
"rotation":"fourty"
}

Error message: "The value "fourty" for the rotation property could not be parsed to an integer."

Rotation property was not supplied with an Integer value in-between 0 and 360
The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON) with an integer value outside rotation property bounds:
{
"rotation":-1
}

Error message: "The value "-1" is not valid for the rotation property. Accepted values are integer numbers in between 0 and 360."

Integer property was not supplied with an Integer value larger than 0
The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON) with an integer entry below zero:
{
"fontscale":-1
}

Error message: "The value "-1" is not valid for the fontscale property. Accepted values are integer numbers larger than 0."

Color property was not supplied with a valid Color value
The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON) with an invalid color entry for a color property value:
{
"color":-1
}

Error message: "The value "-1" for the color property could not be parsed to a Color."

Alignment String property is not supplied with a String value of "left", "right" or "centre"
The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON) with an invalid string entry for the alignment property:
{
"alignment":-1
}

Error message: "The value "-1" is not valid for the alignment property. Accepted values are "left", "right" or "centre"."

Multiple errors of different types
The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON) with a combination of all types of stated errors from above:
{
"alignment":-1,
"arrowheadsize":15,
"undreline":true
}

Error messages:
"The property arrowheadsize is not valid for the SOLIDTEXT annotation type."
"The value "-1" is not valid for the alignment property. Accepted values are "left", "right" or "centre"."
"The property "undreline" is invalid."


Daeja ViewONE 5.0.9 iFix 2

IBM Daeja ViewONE 5.0.9 iFix 1

IO27747 CERTAIN MICROSOFT OFFICE WORD DOCUMENTS RENDERED WITH MIS-ALIGNED CONTENT

Tables that should appear on the first page of a Microsoft Word document getting displayed on a subsequent page and all other subsequent pages content is mis-aligned.

Affected users: IBM Daeja ViewONE Virtual users


ArrayIndexOutOfBoundsException with some documents

Some text documents, and unrecognised document types handled as a text, throw ArrayIndexOutOfBoundsException. Documents that cause this issue will have single lines of content that are very long.

Affected users: IBM Daeja ViewONE Virtual users


Network logging revised

The logging provided under traceNet has been reduced and updated to provide clearer Information about what the viewer is accessing. Extended logging that was previously output is now available by using the traceNetDebug property.

Affected users: IBM Daeja ViewONE Virtual users


The annotateEdit parameter should only control the UI annotation edit features, and not influence the enablement of JavaScript API methods.

The enablement of some annotation JavaScript API methods are dependent on the annotateEdit parameter being set to true. For example, the startAnnotation function will only be actioned if annotateEdit=true. This has been updated such that the annotateEdit parameter only controls whether users can manipulate annotations in the UI. When the annotationJavascriptExtensions parameter is set to true, all annotation API functions will now be actionable.

Affected users: IBM Daeja ViewONE Virtual users


IO28165 VIEWER RENDERS ONLY A FEW OR NO SLIDES OF POWER POINT DOCUMENTS ON LINUX

When opening any PowerPoint documents, with the viewer deployed on a Linux server, only a few or no slides are rendered and the page count shows an incorrect value.

Affected users: IBM Daeja ViewONE Virtual users


IO28106 UNABLE TO PRINT LABELS USING JAPANESE CHARACTERS

Labels set using HTML parameter pageLabel, that include Japanese characters, are not printed correctly.

Affected users: IBM Daeja ViewONE Virtual users


New Properties Argument Added to JavaScript API method startAnnotation

The JavaScript method startAnnotation now uses a new argument for preselecting the properties of the annotation being drawn. startAnnotation's new paramater takes in an input string of JSON properties used to set the annotation's properties.

The JSON allowable property names and their value types for an input JSON string are:

Invalid property name entries will be rejected causing startAnnotation to return false.

Allowable values of Color type properties:

The following provides an example of valid JSON strings for the color type:
{
"color":"cyan"
}

and
{
"color":"70, 60, 160"
}

Allowable values of type String for alignment property:

The following provides an example of a valid JSON string for the string type:
{
"alignment":"right"
}

The following code provides an example of an input JSON string for startAnnotation(annType, isSticky, inputJSON):
{
"color": "blue",
"linewidth": 15
}

The properties available to each annotation type are:

The following is an example of the startAnnotation method usage with the properties argument:

viewone.startAnnotation('RECTANGLE', false, '{"color":"blue", "linewidth":15}')


New JavaScript API methods for getStates and setStates to get and set Zoom, Rotate, View, and Scroll Position

You can now use the new JavaScript method getStates to retrieve the current viewing states (zoom, rotate, view mode, and scroll position) of a document. This can be used to restore the viewing states of that document later on when the document is reopened. getStates takes in an input string of JSON states to populate as input and returns the JSON with the viewing states filled.

The JSON allowable property values for our input JSON are:



The following code provides an example of an input JSON string for getStates(inputJSON):
{
"viewMode": null,
"zoom": null,
"rotate": null,
"horizontalScrollPosition": null,
"verticalScrollPosition": null
}


The caller provides the parameters they would like to retrieve for viewing states. Any of the above parameters can be added or omitted.

The following code provides an example of a response JSON string from getStates:
{
"viewMode": "thumbsleft",
"zoom": "0.37",
"rotate": "90deg",
"horizontalScrollPosition": "0",
"verticalScrollPosition": "0.0078044235861488296"
}


Similarly, you can use getStates to set the current viewing states (zoom, rotate, view mode, and scroll position) of a document. setStates takes in an input string of JSON states to set and applies those states to the document.

The following code provides an example of an input JSON string for setStates(inputJSON):
{
"viewMode": "thumbsleft",
"zoom": "0.37",
"rotate": "90deg",
"horizontalScrollPosition": "0",
"verticalScrollPosition": "0.0078044235861488296"
}



5.0.9

Some of the pop-ups and dialogs in the Carbon UI design package have an outline around them when they are in focus.

In the Carbon UI design package, some of the pop-ups and dialogs have an outline around them when they are in focus. They have been updated to remove the outline.

Affected users: IBM Daeja ViewONE Virtual users


Viewer does not throw OPEN_DOC_FAILED(61) while opening unsupported document in docbuilder.

When MODE_CHANGE_CANCELLED(86) is in the event interest list, changing to docbuilder mode while viewing a protected document, does not throw an OPEN_DOC_FAILED(61) event or notify the user.

Affected users: IBM Daeja ViewONE Virtual users


Opening a document with role-based redaction fails

Opening a document that is required to have a role-based redaction applied to it fails. The client shows an error message 'Unable to display document: Failed to load document, status: Open document failed: Failed to load PDF render' and the server log shows a '403 Forbidden' message.

Affected users: IBM Daeja ViewONE Virtual users


Closing a document or opening a document before a Document Builder action has completed may lead to error dialogs .

Closing the current document or opening a new document before a Document Builder action has completed can lead to an 'Unable to display document' error message. The closing and opening documents process now waits until all Document Builder actions have completed before closing or opening a new document.

Affected users: IBM Daeja ViewONE Virtual users


Selecting a page via the page number editor may not be reflected in main view.

When selecting a page in a document by using the page number editor. The selected page may not be reflected in the main view.

Affected users: IBM Daeja ViewONE Virtual users


Switching to Thumbs Only View Mode may cause JavaScriptExceptions in the logs.

Switching to Thumsb Only View Mode, when the annotations toolbar is not visible, may cause JavaScriptExceptions in the logs.

Affected users: IBM Daeja ViewONE Virtual users


PDF WORKER SCRIPT IS NOT ALWAYS CACHED

In some environments, the PDF worker script is not cached per session. This can lead to additional PDF worker script requests being made each time a PDF is opened within that session.

Affected users: IBM Daeja ViewONE Virtual users


The no-fill color option has been removed from some annotation types.

The no-fill option has been removed from the line and fill color pickers for the following annotation types in the Carbon Design Package:


The zoom in and zoom out buttons in the Carbon UI design package are disabled when the magnifier is active

The zoom in and zoom out buttons on the south toolbar of the Carbon UI design package are disabled when the magnifier is in use.


The Keyboard Shortcut to Cancel an Annotation Draw has been Changed from 'Ctrl + U'to the Escape Key

The keyboard shortcut to allow the cancelling of an annotation draw has been changed from 'Ctrl + U' to the Escape key.


Carbon Design Package Updates

A number of changes have taken place to the Carbon Design Package. These are listed here:


New Javascript Document Builder Clipboard Javascript Methods

Three new Javascript methods have been added cutSelectedPages(), copySelectedPages() and pasteDocumentPages. These three method replicate the bahavior of the Cut, Copy and Paste buttons in the UI when in Document Builder Edit Mode.


Set Server Properties from Environment Variables

With different deployment options available for ViewONE, there are different ways that server properties can be set;

This has now been extended so that properties can be set via Operating System Environment Variables.

The precedence order for setting properties is

  1. Operating System Environment Variable
  2. Java System Property
  3. Servlet specific Property File
  4. Servlet Initialization Parameter


New Javascript Method for Checking Unsaved Docbuilder Changes

A new Javascript method has been added, hasUnsavedDocbuilderChanges(), that allows a caller to know if there are any unsaved Document Builder changes before the document is built. A new method checks whether there are any unsaved page edits or annotation edits for the current document. This method could be used to check whether a document that is about to be closed requires building beforehand.

Returned ValueDescription
trueThe current document contains unsaved page edits or annotation edits
falseThe current document does NOT contain unsaved page edits or annotation edits


The Visibility of the 'more items' Toolbar Button is Controlled by the 'overflowMenu' HTML Parameter

The visibility of the 'more items' toolbar button on the North Toolbar is controlled by the new HTML parameter 'overflowMenu'.

ValueDescription
trueThe 'more items' button is visible. (Default)
falseThe 'more items' button is NOT visible.


NOTE: This feature is only available in the Carbon Design Package.


New Javascript Document Builder 'setEditable' Javascript Method

A new Javascript method has been added, setEditable(isEditable), which allows documents to be opened in Document Builder mode as read-only.

With setEditable(false), the following Document Builder actions will not be availble;



NOTE: Calling setEditable(false) will have no effect if the document already has unsaved document builder actions applied.


New Javascript Event for Viewmode Change

A Javascript event has been added for when the displayed view mode has changed. This new event, 90, is fired after the viewmode has switched. The event text will contain the name of the new view mode as defined by the viewmode HTML Parameter, which can be the following values:


New Javascript Event for when an annotation is created

A Javascript event, 30, has been added that is fired when a new annotation is added to the current document.


New JavaScript Method for Getting Page Selection Information from a Multi-page Selection

You can now use the new JavaScript method getPageSelection() to retrieve information on a multi-page selection. When a range of pages is selected in the Thumbnails view, by using SHIFT+CLICK, CTRL+CLICK or CTRL+A, a JSON string can be retrieved with the number of selected pages and the total range of all selected pages.

The following code provides an example of a response JSON from getPageSelection():

{
"pageSelectionInfo": [
{
"name": "PagesSelected",
"value": "232"
},
{
"name": "Pages",
"value": "[1-228, 230, 233-235]"
}
]
}


PagesSelected returns the total number of pages that are selected and Pages returns a comma-separated array of page ranges that are selected.


New Carbon Design Package Feature Available to Select Multiple Pages in Thumbnails View for Annotate and Redact Modes

When multiple thumbnails are selected, you can use the Rotate action only, which applies to all selected pages. The Invert, Visual Effects Filter, and Enhance actions are disabled.

To select multiple thumbnails, press and hold the CTRL key and click each thumbnail that you want to select, or press and hold the SHIFT key and select the first and last thumbnail to select all thumbnails in that range or press and hold the CTRL key and press the A key to select all thumbnails. The Rotate action applies to all pages that you selected.

Note: this feature is only available in the new Carbon User Interface. To use the Carbon GUI and enable this feature, configure the viewer as described here: Switch between Classic and Carbon UI


Support Added for HTML Parameters thumbnailDefaultHeight and thumbnailDefaultWidth in the Carbon Design Package

These parameters set the default height and width of thumbnails in the viewer. You can change the default height and width to fit more or less thumbnails in the visible area.

The thumbnailDefaultHeight parameter and the thumbnailDefaultWidth parameter set the size of each thumbnail display area, including the measurement of any borders defined by the theme.

The value for this parameter is in pixels. By default, the width is 184 pixels.

The minimum value for these parameters is 93 pixels.
The maximum value for these parameters is 400 pixels.

Example

<param name="thumbnailDefaultWidth" value="93" />
<param name="thumbnailDefaultHeight" value="100" />


SUPPORT FOR FOREGROUND/ BACKGROUND IMAGE RENDERING

Parameter name Description
backgroundImage This parameter is used to allow viewing of two TIF format pages simultaneously with one overlaid on the other. The URL associated with the parameter defines the source file to be used as a background image and this source file must be in the TIF format.
The foreground image URL is defined by one of the 'filename' 'page' or doc' parameters and must also be in the TIF format.
Use of Redaction and/or DocBuilder modules is not supported with documents that are made up of more than one image
  • Default Setting: n/a
  • Sample Syntax: <PARAM NAME='backgroundImage' value='http://mysite/mybackimage.tif'>
backgroundImagePageNumber This parameter allows you force ViewONE to use a specific page from the source background TIF file (as defined by the 'backgroundImage' parameter) for the background template.
  • Default Setting: 1
  • Sample Syntax: <PARAM NAME='backgroundImagePageNunber' value='2'>


New HTML Parameter 'enableSearch' controls whether the Search button is visible

The option to control whether the Search button is visible is now available.

The Search button is visible by default and is controlled by the new HTML parameter 'enableSearch'.

ValueDescription
trueThe Search button is visible (default).
falseThe Search button is not visible.


New HTML Parameter 'enhanceOptionsButton' controls whether the Image Enhance button is visible

The option to control whether the Image Enhance options button is visible is now available.

The Image Enhance options button is visible by default and is controlled by the new HTML parameter 'enhanceOptionsButton'.

ValueDescription
trueThe Image Enhance options button is visible (default).
falseThe Image Enhance options button is not visible.


HTML Parameter 'docBuilderUnsavedPromptOnClose' now controls the unsaved document builder changes dialog

When a document with unsaved document builder changes is closed, a dialog prompt is displayed to allow the user to save or ignore changes.

This dialog prompt is now managed by the HTML Parameter 'docBuilderUnsavedPromptOnClose'.

NOTE: The HTML parameter 'annotationAutoBurnPromptOnClose' no longer has any effect on docbuilder unsaved changes dialog.


Log Console feature is removed

The option to view the Log Console is now removed from the Trace Dialog panel. The trace logs are now outputted to the browser console.


Left clicking the Zoom +/- buttons now applies the zoom to the thumbnails in Thumbs Only viewmode

When in Thumbs Only Viewmode, left and right clicking the zoom +/- buttons applies the zoom to the thumbnails.

ViewmodeZoom +/- Button Behavior
Thumbs OnlyLeft Click: Applies the zoom level to the thumbnails only
Right Click: Applies the zoom level to the thumbnails only
Full PageLeft Click: Applies the zoom level to the page view only
Right Click: Has no effect on the page view.
Thumbs Left
Thumbs Right
Thumbs Top
Thumbs Bottom
Left Click: Applies the zoom level to the page view only
Right Click: Applies the zoom level to the thumbnails only


New Progress Bar When Loading

The progess bar used to show the application is being loaded has been updated.


Additional Release Notes

System requirements

Go to the page at Software Product Compatibility Reports to create a high-level report for operating systems, hypervisors and prerequisites.

Optimized performance of printing PDF documents

When printing PDF documents with annotations, the annotations are embedded in the downloaded PDF document as native PDF annotations. This reduces the time taken to print documents, especially large documents.

This process currently only applies to printing PDF documents when 'Print Original Size' is selected in the print settings. If this is not selected or the printed document contains other file formats, the print process completely flattens the content of each page.

The time it takes to prepare a PDF with annotations for print using the optimized print depends on the total number of annotations. In most cases you need to have several hundreds of annotations in a single document before the time difference becomes noticeable.

With the optimized print any annotations created in IBM Daeja ViewONE Virtual are embedded into the document as native PDF annotations. Therefore they are recognized as active annotations when the PDF is viewed by tools that support editing of PDF documents. If this document is subsequently viewed by IBM Daeja ViewONE Virtual, any annotations will be treated as static content where loading a document with pre-applied native annotations cannot be edited. To prevent document or annotation modification appropriate security would need to be set via a tool that supports editing or via some PDF printers.

Sticky Notes
Sticky Note annotations will appear on top of other annotations regardless of z-order.

Line Width
The maximum line width of native annotations is 12pt and will be limited to this for print output.

Solid Text
If a solid text annotation is set to be semi-transparent the fill background and the text will become semi-transparent, previous behavior left the text solid and only the fill became semi-transparent.

Image Stamps
Image stamp annotations will appear underneath any other annotation types regardless of the z-order. This is due to the fact that they added to the content of the PDF and not as separate native PDF annotations.

Limitations

The optimized PDF print does not occur in the following circumstances:

Deprecation of Annotation Types

As of IBM Daeja ViewONE Virtual Version 5.0.6 the following annotation types are deprecated:

These annotation types will be removed in a future version of the product.

Deprecation of Email Render = 1

As of IBM Daeja ViewONE Virtual Version 5.0.3, the default value for parameter emailRenderer is set to '2' which represents the email module that allows for paginated output. See more details for this module below. As of IBM Daeja ViewONE Virtual Version 5.0.6, the ability to switch the email module to the alternative value "1" has been deprecated. The value will be removed as a valid setting for the parameter in a future release.

The email module that produces paginated output is now the default setting for the standalone product. This email module supports the display of EML (MIME RFC 822) and MSG (Microsoft Outlook and Exchange) formats as paginated content, and allows for streaming and redaction of emails. It requires the IBM ViewONE Office Module to be licensed. To redact emails, the IBM ViewONE Permanent Redaction module is also required. When opening emails that have annotations saved using the older email rendering mechanism, the HTML parameter 'emailUseAnnotationDefinedModule' defines the behavior.

The 'emailUseAnnotationDefinedModule' parameter can have the following values:

*always: The default behavior is to always attempt to use the renderer that is defined in the annotation.

*never: The renderer that is defined in the annotation is never used. Instead, the email is opened using the renderer specified in the viewer. This may cause the annotations to move. The user will be notified that 'The annotations on this document were saved with a different version of the viewer. Annotation may have moved and will need checking'. The annotation save button will be enabled and user will be prompted to save before they leave the document unless the 'annotationAutoPrompt' HTML parameter has been set. The 'annotationAutoSave' HTML parameter does not work for this annotation change.

*prompt: The user receives a prompt when annotations were created using a different renderer, giving them the option to open using the renderer defined for the viewer (Yes) or attempt to open with the renderer that is specified in the annotation (No). If the user click Yes they will then be notified that 'The annotations on this document were saved with a different version of the viewer. Annotation may have moved and will need checking'. The annotation save button will be enabled and user will be prompted to save before they leave the document, unless the 'annotationAutoPrompt' HTML parameter has been set. The 'annotationAutoSave' HTML parameter does not work for this annotation change.

Document Builder

Document Builder uses repository-document and repository-annotations when the document is created

The document will be built with the source document as it is saved in the repository. The document is also built by using the annotations that are saved in the repository, unless annotations have been edited. The following scenarios explain the effects of this behavior:

Scenario 1:
  1. Two instances of the viewer are opened in document builder mode
  2. A document is loaded from a repository into each viewer window
  3. The document builder user copies a page from the document in viewer window 1 and pastes the page into the document in viewer window 2
  4. While the document builder user is working on the documents, another user or system process alters one or both of the master documents
  5. The document builder user builds the modified document
  6. Because one or both of the master documents were altered during the document builder session, the built document contains the pages from the latest saved version of the master documents

Result: The document currently displayed in the viewer differs from the newly built document in the system. To prevent this issue occurring, the master document should be locked or checked out when it is retrieved for document builder.

Note Versioned documents will not be affected by this issue. This will only affect situations where the document that a URL refers to has changed.

Scenario 2:
  1. Two instances of the viewer are opened in document builder mode
  2. A document with annotations is loaded from a repository into each viewer window
  3. The document builder user copies a page from the document in viewer window 1 and pastes the page into the document in viewer window 2
  4. While the document builder user is working on the document, another user or system process alters one or more of the annotations used in one or both master documents
  5. The document builder user builds the modified document
  6. The built document contains the pages from the latest saved version of the master documents. For pages where the document builder user has not modified annotations in the viewer, the annotations for those pages come from the latest saved annotations version. For pages that the user has modified the annotations in the viewer, those pages will contain annotations as seen in the viewer which may not contain the latest changes

Result: The document currently displayed in the viewer differs from the newly built document in the system. To prevent this issue occurring, the master document should be locked or checked out when it is retrieved for document builder.

Restore annotations is not supported in document builder mode

When in document builder mode, the option to restore annotations is not supported. The following scenario explains the effects of this behavior:

Scenario 1:

  1. Viewer is loaded in document builder mode
  2. A document is loaded from a repository
  3. Annotations are created by the user
  4. Restore annotations button is disabled
  5. Javascript API reloadAnnotations() is disabled

Result: The user cannot reload the annotations from the server. Newly created annotations and edited annotation edits remain.

To restore any newly created annotations, the user must take the following steps:

  1. Remove the page on which annotations are present that you want to restore
  2. Put the page with the original annotations on the clipboard (cut/copy)
  3. Paste the page into the new document location

Daeja ViewONE as an Integrated solution

When running Daeja ViewONE 5.0.9 as a component inside IBM Content Navigator, the minimum supported version of ICN is 3.0.9, unless stated otherwise by the specific ICN release.

Known problems, issues, and limitations

As problems are discovered and resolved, the IBM Support team updates the Support site. By searching the Support site, you can quickly find workarounds or solutions to problems.

The following links open queries for IBM Daeja ViewONE documents on the IBM Support site:

Any restrictions and/or limitations of the base or fix pack release and any subsequent ifixes, still apply to this release unless stated otherwise.

Supported File Formats in ViewONE Virtual

For information on the supported file formats refer to the tech note below. Please note that this is a live document and might get updated frequently. https://www-01.ibm.com/support/docview.wss?uid=ibm10730429

Comparison with native renderers

IBM Daeja ViewONE Virtual is designed to support as many file types as possible. However, the product is not able to render every type of file with the same accuracy as native applications, such as Microsoft Word. The flexibility of the viewer can lead to differences in the way that the documents are displayed between the native application and the viewer. The severity of the differences varies depending on the complexity of the file type. In particular, PDF files and Microsoft Office files are difficult to render with complete accuracy in a universal viewer.

Microsoft browser limitation

For additional information on IE/Edge limitations, refer to the following tech notes:

Excel spreadsheet load times

Excel spreadsheet load times are impacted based on the size and complexity of the Excel document. In order to improve load times, IBM Daeja ViewONE does support tuning capabilities, such as breaking up the Excel document presentation into multiple pages. Please be aware, as this behavior may not be optimal for your end user viewing experience.

Prompt to save redacted documents uses hexadecimal filename

After a document is permanently redacted and the user selects Download, they are normally prompted to save the document with a file name based on the original un-redacted document. For instance, mypresentation.ppt will default to mypresentation.tif. In this version the user might be prompted with a filename such as 41f96b20b97f431ebd4efd85245f1f72.tif instead. The user can still change the name to something more meaningful.

No pageN support in document builder mode

If a pageN document is open in the viewer, the user cannot switch to document builder mode. The user remains in the edit mode in which the document was opened. The following scenario explains the effects of this behavior:

Scenario 1:

  1. Viewer is loaded in either annotation or redaction mode
  2. A pageN document is loaded from a repository
  3. A user attempts to switch to document builder mode
  4. The user receives a message and remains in annotation or redaction mode

Result: This switch is not permitted and the user will stay in their current mode.

To enter document builder mode, the user must close the pageN document and then switch to document builder mode.

No docN support in document builder mode

DocN documents are not supported in conjunction with document builder mode. The combination of these features may result in unusual and/or unexpected behavior.

Document Builder supported file type limitations

Document builder is able to support TIFF and PDF files with the exception of email attachments. TIFF and PDF files that are attached to emails cannot be used as source files for a new document.

PDF files with access control flags set by the owner of the document cannot be used as a source document for document building where they require a password to view the document or where the owner has indicated that the content may not be copied.

Rendering of the semi transparency appears to blend between the outline and the fill

Annotations that have the semi-transparent property set to true, the transparent property set to true and a fill color set can appear to blend the line and fill colors near the edges.

Annotation with fill color set to black and set to transparent are not printed transparent

Annotations that have the transparent property set to true and a fill color set to black are not printed transparent for non PDF documents. When printing PDF documents, with 'Print Original Size' selected, these annotations are printed with transparency applied.

Copyright and trademark information

http://www.ibm.com/legal/copytrade.shtml

Notices

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

Other company, product, or service names may be trademarks or service marks of others.

THIRD-PARTY LICENSE TERMS AND CONDITIONS, NOTICES AND INFORMATION

The license agreement for this product refers you to this file for details concerning terms and conditions applicable to third party software code included in this product, and for certain notices and other information IBM must provide to you under its license to certain software code. The relevant terms and conditions, notices and other information are provided or referenced below. Please note that any non-English version of the licenses below is unofficial and is provided to you for your convenience only. The English version of the licenses below, provided as part of the English version of this file, is the official version.

Notwithstanding the terms and conditions of any other agreement you may have with IBM or any of its related or affiliated entities (collectively "IBM"), the third party software code identified below are "Excluded Components" and are subject to the following terms and conditions: