Readme File for IBM^® Spectrum Symphony 7.2.0.2 Interim Fix 534163

Readme File for: IBM Spectrum Symphony

Product Release: 7.2.0.2

Update Name: Interim Fix 534163

Fix ID: sym-7.2.0.2-build534163

Publication Date: November 20, 2019

This enhancement enables millisecond-level logging for the VEMKD daemon with a new EGO_ENABLE_MILLISECOND_LOG parameter in the ego.conf file for IBM Spectrum Symphony 7.2.0.2. When EGO_ENABLE_MILLISECOND_LOG is enabled, millisecond-level logging takes effect for the VEMKD log at $EGO_TOP/kernel/log/vemkd.log.host_name.

Contents

1. List of fixes

2. Download location

3. Product and components affected

4. Installation and configuration

5. Uninstallation

6. List of files

7. Product notifications

8. Copyright and trademark information

1.    List of fixes

APAR: P103328

2.    Download location

Download interim fix 534163 from the following location: https://www.ibm.com/eserver/support/fixes/

3.    Product and components affected

Component name, Platform, Fix ID:

EGO, Linux x86_64, sym-7.2.0.2-build534163

4.    Installation and configuration

Follow the instructions in this section to download and install this interim fix in your cluster.

System requirements

Linux x86_64

Installation

a.     Log on to the master host as the cluster administrator and shut down all master candidate hosts:

$ egosh ego shutdown hostname

b.     On each master candidate host (or just one host if you are using a shared file system), back up the following file, which will be replaced by this interim fix:

$EGO_TOP/3.6/etc/vemkd

c.      On each master candidate host (or just one host if you are using a shared file system), copy the sym-7.2.0.2_x86_64_build534163.tar.gz package and extract its contents to the $EGO_TOP installation directory:

$ tar zxfo sym-7.2.0.2_x86_64_build534163.tar.gz -C $EGO_TOP

d.     On the master host, edit the $EGO_CONFDIR/ego.conf file and configure the EGO_ENABLE_MILLISECOND_LOG parameter to enable millisecond-level logging for the VEMKD:

EGO_ENABLE_MILLISECOND_LOG=Y

e.     From the master host, start all master candidate hosts:

$ egosh ego start hostname

5.    Uninstallation

If required, follow the instructions in this section to uninstall this interim fix in your cluster.

a.     Log on to the master host as the cluster administrator and shut down all master candidate hosts:

$ egosh ego shutdown hostname

b.     On each management host (or just one host if you are using a shared file system), restore your backup for the following file:

$EGO_TOP/3.6/etc/vemkd

c.      From the master host, start all master candidate hosts:

$ egosh ego start hostname

6.    List of files

3.6/etc/vemkd

7.    Product notifications

To receive information about product solution and patch updates automatically, subscribe to product notifications on the My Notifications page http://www.ibm.com/support/mynotifications/ on the IBM Support website (http://support.ibm.com). You can edit your subscription settings to choose the types of information you want to get notification about, for example, security bulletins, fixes, troubleshooting, and product enhancements or documentation changes.

8.    Copyright and trademark information

© Copyright IBM Corporation 2019

U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

IBM®, the IBM logo, and ibm.com® are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.