IBM Spectrum LSF 10.1 Fix 510382 Readme File

Abstract 

P102832. This fix prevents a job from executing the JOB_CONTROLS terminate action command in a dead loop when the job reaches the PROCESSLIMIT and RUNLIMIT values.

Description

Readme documentation for IBM Spectrum LSF 10.1 Fix 510382 including installation-related instructions, prerequisites and co-requisites, and list of fixes.

This fix addresses the following issue:

When a job reaches the PROCESSLIMIT and RUNLIMIT values and the JOB_CONTROLS terminate action is configured as a command, the job executes the JOB_CONTROLS terminate action command in a dead loop.

Prerequisites
Fix 505504 must be applied.

Readme file for: IBM® Spectrum LSF

Product/Component Release: 10.1 

Update Name: Fix 510382 

Fix ID: LSF-10.1-build510382 

Publication date: 5 January 2019 

Last modified date: 5 January 2019 

Contents:

1.     List of fixes 

2.     Download location 

3.     Products or components affected

4.     System requirements 

5.     Installation and configuration

6.     List of files

7.     Product notifications

8.     Copyright and trademark information

1.   List of fixes

P102832 

2.   Download Location

Download Fix 510382 from the following location: http://www.ibm.com/eserver/support/fixes/

3.   Products or components affected

Affected components include: LSF/sbatchd, LSF/res 

4.   System requirements

Linux2.6-glibc2.3-x86_64
Linux3.10-glibc2.17-x86_64

5.   Installation and configuration

5.1          Before installation

 (LSF_TOP=Full path to the top-level installation directory of LSF.)

1)    Log on to the LSF master host as root

2)    Set your environment:

-      For csh or tcsh: % source LSF_TOP/conf/cshrc.lsf

-      For sh, ksh, or bash: $ . LSF_TOP/conf/profile.lsf

3)    Ensure Fix 505504 has been installed.

5.2          Installation steps

1)    Run "badmin qinact all"

2)    Run "badmin hclose all"

3)    Go to the patch install directory: cd $LSF_ENVDIR/../10.1/install/ 

4)    Copy the patch file to the install directory $LSF_ENVDIR/../10.1/install/ 

5)    Run patchinstall: ./patchinstall <patch>

5.3          After installation

1)    Run "lsadmin resrestart all"

2)    Run "badmin hrestart all"

3)    Run "badmin qact all"

4)    Run "badmin hopen all"

5.4          Uninstallation

To roll back a patch:

1)    Log on to the LSF master host as root

2)    Run "badmin qinact all"

3)    Run "badmin hclose all"

4)    Run ./patchinstall -r <patch>

5)    Run "lsadmin resrestart all"

6)    Run "badmin hrestart all"

7)    Run "badmin qact all"

8)    Run "badmin hopen all"

6.   List of files 

sbatchd

res

7.   Product notifications

To receive information about product solution and patch updates automatically, subscribe to product notifications on the My notifications page (www.ibm.com/support/mynotifications) on the IBM Support website (support.ibm.com). You can edit your subscription settings to choose the types of information you want to get notification about, for example, security bulletins, fixes, troubleshooting, and product enhancements or documentation changes.

8.   Copyright and trademark information

© Copyright IBM Corporation 2019 

U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

IBM®, the IBM logo and ibm.com® are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.