IBM Platform Symphony 5

IBM Platform Symphony 5.1 Interim Fix 370568 Readme File

Abstract

Various fixes for IBM Platform Symphony 5.1.

Description

This fix includes the following fix IDs:

sym-5.1-build355638

This fix applies only to the following platform:

Linux 64-bit

Readme file for: IBM® Platform Symphony

Product/Component Release: 5.1

Update Name: Interim Fix

Fix ID: sym-5.1-build370568-jpmc

Publication date: 6 Nov 2015

Last modified date: 6 Nov 2015

Contents:

1. List of fixes

2. Download location

3. Products or components affected

4. Installation and configuration

5. List of files

6. Copyright and trademark information

1. List of fixes

APAR: P101457.

2. Download Location

Download Fix 370568 from the following location: http://www.ibm.com/eserver/support/fixes/

3. Products or components affected

Product/Component Name:

Platform Symphony/EGO

4. Installation and configuration

4.1. Before installation

1. Disable all applications and shut down the cluster.

> soamcontrol app disable all

> egosh service stop all

> egosh ego shutdown all

2. Back up files.

Log on to each host and back up the following files that will be replaced by this fix:

$EGO_TOP/1.2.5/linux2.6-glibc2.3-x86_64/bin/egosh

4.2. Installation steps

Before you install

For the lowest risk to production environments, follow these steps. The cluster can be quickly rolled back if the management host fails:

a. For every existing management host in the cluster, add a new management host. At least one of the new management hosts must be a master candidate (that is, it must be listed in the cluster's master list).

b. Update the new hosts with this fix and verify that they are functioning correctly.

c. Update or remove the original management hosts.

Installation instructions

When you install the RPM package, note the following:

a. Use RPM version 4.2.1 or later.

b. Use the same prefix value that was used for the initial installation.

c. Use the same dbpath value that was used for the initial installation.

For example, if the dbpath and prefix values were set as follows in the previous Platform Symphony 5.1 installation:

> rpm -ivh --dbpath /tmp/rpm --prefix /opt/platform ego-linux2.6-glibc2.3-x86_64-1.2.5-nnnnnn.rpm

use the same dbpath and prefix values when installing this fix for Platform Symphony 5.1:

> rpm -Uvh --dbpath /tmp/rpm --prefix /opt/platform --nopreun --nopostun ego-linux2.6-glibc2.3-x86_64-1.2.5-370568.rpm

4.3. After installation

1. Verify the installation.

>egosh –V

The following is a sample output of running the verification command:

Platform EGO 1.2.5.355638, Jul 29 2015

binary type: linux2.6-glibc2.3-x86_64

notes:

2. Start the cluster and enable the application.

> egosh ego start all

> soamcontrol app enable <appName>

4.4. Uninstallation

1. Disable all applications and shut down the cluster.

> soamcontrol app disable all

> egosh service stop all

> egosh ego shutdown all

2. Uninstall.

Use the Platform Symphony product from the previous RPM package. To roll back a Platform Symphony host, run:

> rpm -Uvh --dbpath /tmp/rpm --prefix /opt/platform --nopreun –nopostun --oldpackage ego-linux2.6-glibc2.3-x86_64-1.2.5-nnnnnn.rpm

3. Start the cluster and enable the application.

Log on to the master host as the cluster administrator and run:

> egosh ego start all

> soamcontrol app enable <appName>

5. List of files

$EGO_TOP/1.2.5/linux2.6-glibc2.3-x86_64/bin/egosh

6. Copyright and trademark information

U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

IBM®, the IBM logo and ibm.com®are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.