IBM Platform Symphony 7.1 Interim Fix 345408 Readme File
Abstract
The compute host fails to update the local ego.conf
file according to the master announcement.
Description
After updating the master list and restarting the master LIM, the ego.conf file on compute hosts is out of
sync with the master configuration.
This
fix applies only to the following platform:
Linux 64-bit
Readme file for: IBM® Platform Symphony
Product/Component Release: 7.1
Update Name: Interim Fix
Fix ID: sym-7.1-build345408
Publication date: 3 June 2015
Last modified date: 3 June 2015
Contents:
1. List of fixes
2. Download location
3. Products or components affected
4. Installation and configuration
5.
List
of files
6. Copyright and trademark information
1. List of fixes
APAR:
P101176.
2. Download location
Download Fix 345408 from the following location: http://www.ibm.com/eserver/support/fixes/
3. Products or components affected
Product/Component Name:
Platform
Symphony/lim
4. Installation and configuration
4.1 Before installation
1. Disable all applications and shut down the cluster.
>
soamcontrol app disable all
> egosh service stop all
> egosh ego shutdown all
2. Back up the file.
Log on to all hosts in the cluster and back up the following file that will be replaced by this fix:
> $EGO_TOP/3.1/linux2.6-glibc2.3-x86_64/etc/lim
4.2 Installation steps
Log on to all hosts in the cluster and replace following LIM binary with the downloaded one:
> $EGO_TOP/3.1/linux2.6-glibc2.3-x86_64/etc/lim
4.3 After installation
1. Verify the installation.
Run the following command:
lim -V
The following is an example of verifying
the installation by running lim -V:
> lim -V
Platform EGO 3.1.0.0
build 345408, May 28 2015
Copyright International
Business Machines Corp, 1992-2014.
US Government Users
Restricted Rights - Use, duplication or disclosure restricted by GSA ADP
Schedule Contract with IBM Corp.
binary type:
linux2.6-glibc2.3-x86_64
notes:
fixes:
2. Start the cluster and enable the application.
> egosh ego start all
> soamcontrol app enable <appName>
4.4 Uninstallation
1. Disable all applications and shut down the cluster.
> soamcontrol app disable all
> egosh service stop all
> egosh ego shutdown all
2. Uninstall.
Log on to all hosts in the cluster and restore
the backup file for the following binary:
>
$EGO_TOP/3.1/linux2.6-glibc2.3-x86_64/etc/lim
3. Start
the cluster and enable the application.
> egosh ego start all
> soamcontrol app enable <appName>
5. List of files
lim
6. Copyright and trademark information
© Copyright IBM Corporation 2015
IBM®, the IBM logo, and ibm.com® are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.