IBM Platform Symphony 6.1.1 Interim Fix 343140 Readme File

Abstract

SD is unable to register with the appropriate SD_SDK/SD_SSM port number.

Description

This is a log enhancement for the condition when SD is unable to register with the appropriate SD_SDK/SD_SSM port number.

This interim fix applies only to the following platform:

Linux2.6-glibc2.3-x86_64

Readme file for: IBM® Platform Symphony

Product/Component Release: 6.1.1

Update Name: Interim Fix 343140

Fix ID: sym-6.1.1-build343140

Publication date: 22 May 2015

Last modified date: 22 May 2015

Contents:

1. List of fixes

2. Download location

3. Products or components affected

4. Known limitations

5. Installation and configuration

6. List of files

7. Copyright and trademark information

1. List of fixes

APAR#P101043

2. Download location

Download Interim Fix 343140 from the following location: http://www.ibm.com/eserver/support/fixes/.

3. Products or components affected

Product/Component Name, Platform, Fix ID:

Platform Symphony/sd Linux 64-bit, sym-6.1.1-build343140

4. Known limitations

None.

5. Installation and configuration

5.1 Before installation

1. Stop the application.

Log on to the management host as the cluster administrator and run:

> soamcontrol app disable appname

> egosh service stop all

> egosh ego shutdown all

2. Back up the affected directory.

Log on to the management host, and back up the following file, which will be replaced by this fix:

$SOAM_SERVERDIR/sd

5.2 Installation steps

Log on to the management host, and replace the old file with the downloaded one in the following directory:

$SOAM_SERVERDIR/sd

5.3 After installation

1. Verify the installation.

Run:

> sd –V

The following is a sample output of running the above command:

Platform Symphony 6.1.1.0.343140, May 17 2015

Copyright (C) 2001-2011 Platform Computing Corporation

2. Start the application.

Log on to the management host as the cluster administrator and run:

> egosh ego start all

> soamcontrol app enable appname

5.4 Uninstallation

1. Stop the application.

Log on to the management host as the cluster administrator and run:

> soamcontrol app disable appname

> egosh service stop all

> egosh ego shutdown all

2. Restore the backup file.

Log on to the management host and restore the backed up file from the following directory:

> $SOAM_SERVERDIR/sd

3. Start the application.

Log on to the master host as the cluster administrator and run:

> egosh ego start all

> soamcontrol app enable appname

6. List of files

sd

7. Copyright and trademark information

© Copyright IBM Corporation 2015

U.S. Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

IBM®, the IBM logo, and ibm.com® are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.