IBM Platform Symphony 6.1 Interim Fix 243322 Readme File
Abstract
The Platform Symphony
PMC service does not restart when the amount of memory exceeds the value
specified for MEM_HIGH_MARK.
Description
PMC cannot restart if the amount of memory specified for
MEM_HIGH_MARK exceeds.
This fix patch applies only to the following platform:
Linux 64-bit
Readme file for: IBM® Platform Symphony
Product/Component Release: 6.1
Update Name: Interim Fix 243322
Fix ID: sym-6.1-build243322
Publication date: 9 October 2014
Last modified date: 9 October 2014
Contents:
1. List of fixes
2. Download location
3. Products or components affected
4. Installation and configuration
5. List of files
6. Copyright and trademark information
1. List of fixes
APAR P100702
2. Download Location
Download Fix 243322 from the following location: http://www.ibm.com/eserver/support/fixes/
3. Products or components affected
Product/Component Name:
BigInsights 2.1 PSMR/wsm
4. Installation and configuration
4.1 Before installation
1. Stop the BI cluster.
Log on to the master host as the cluster administrator and run:
> source cshrc.platform
> egosh user logon -u Admin -x Admin
> stop-all.sh
2. Back up the file.
Log on to all management hosts in the cluster and back up the following file that will be replaced by this fix:
> $EGO_TOP/gui/
4.2 Installation steps
Log on to all management hosts in the cluster and replace the old file with the downloaded one in the following directory:
> $EGO_TOP/gui/
4.3 After installation
1. Verify the installation.
For example, run:
> $EGO_TOP/gui/
The following is an example output:
Platform EGO
Copyright International Business Machines Corp, 1992-2013.
US Government Users Restricted Rights - Use, duplication or disclosure restricted
by GSA ADP Schedule Contract with IBM Corp.
binary type: linux2.6-glibc2.3-x86_64
notes:
fixes:
2. Start the BI cluster.
Log on to the master host as the cluster administrator and run:
> egosh user logon -u Admin -x Admin
> start-all.sh
4.4 Uninstallation
1. Stop the BI cluster.
Log on to the master host as the cluster administrator and run:
> source cshrc.platform
> egosh user logon -u Admin -x Admin
> stop-all.sh
2. Restore the backup file.
Log on to each management host and restore the backup file for the following file:
> $EGO_TOP/gui/
3. Start the BI cluster.
Log on to the master host as the cluster administrator and run:
> start-all.sh
5. List of files
wsm
6. Copyright and trademark information
© Copyright IBM Corporation 2014
IBM®, the IBM logo and ibm.com® are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at www.ibm.com/legal/copytrade.shtml.