Hardware Management Console Readme For use with Version 8 Release 8.7.0 Updated: 29 May 2019 (C) Copyright International Business Machines Corp., 2019 All rights reserved. Contents <#ibm-content> The information in this Readme contains the fix list and other package information about the Hardware Management Console. * PTF MH01818 <#MH01818> * PTF MH01819 <#MH01819> * List of fixes <#fixes> * Known Issues <#known> * Installation <#install> PTF MH01818 This package represents a fix that can be applied on your HMC Version 8 Release 8.7.x image starting from HMC 8.8.7.0 till HMC 8.8.7.3 You can also reference this package by PTF MH01818 and APAR MB04205. This fix image can be installed on top of HMC Version 8 Release 8.7.0 Recovery installation PTF (MH01704) with or without any additional PTFs or service packs. /Package information/ Package name Size Checksum (sha1sum) APAR# PTF# MH01818_x86.iso 22050816 6367318f1375d1246f7f5c9db6b0ce383612fdbc MB04205 MH01818 Splash Panel information (or lshmc -V output) version= Version: 8 Release: 8.7.0 Service Pack: 3 HMC Build level 1903130704 MH01793 - HMC 870 Service Pack 3 Release MH01818 - iFix for HMC V8R8.7.0+ ","base_version=V8R8.7.0 " PTF MH01819 This package represents a fix that can be applied on your HMC V8.8.7.x image starting from HMC 8.8.7.0 till HMC 8.8.7.3. You can also reference this package by PTF MH01819 and APAR MB04206. This fix image can be installed on top of HMC Version 8 Release 8.7.0 Recovery installation PTF (MH01705) with or without any additional PTFs or service packs. /Package information/ Package name Size Checksum (sha1sum) APAR# PTF# MH01819_ppc.iso 22052864 c06df94188b7e6649b0c918262865dcd57ddfa00 MB04206 MH01819 Splash Panel information (or lshmc -V output) "version= Version: 8 Release: 8.7.0 Service Pack: 3 HMC Build level 1903130704 MH01794 - HMC 870 Service Pack 3 Release MH01819 - iFix for HMC V8R8.7.0+ ","base_version=V8R8.7.0 " * * *General fix* * This PTF includes a fix to enable HMC to use TLS 1.2 communication protocol with IBM cloud storage. This is a mandatory fix if you are using IBM Cloud Management Console for Power System (CMC) service. The PTF must be applied on every Power HMC where HMC cloud connector is enabled and data is pushed to CMC. To check if cloud connector is currently configured and active use the command: lssvc -s cloudconn. *Note:* * This PTF needs to be re-installed if you install any additional service Pack or PTF on top of this PTF. * * Installation Installation instructions for HMC Version 8 upgrades and corrective service can be found at these locations: Upgrading or restoring HMC Version 8 Installation methods for HMC Version 8 fixes Instructions and images for upgrading via a remote network install can be found here: HMC V8 network installation images and installation instructions