Hardware Management Console Readme For use withVersion 7 Release 7.9.0 Service Pack 3 Last updated: 13 June 2016 Contents The information in this Readme contains fix list and other package information about the Hardware Management Console. * PTF MH01622 <#MH01622> * Package information <#package> * List of fixes <#fixes> * Installation <#install> * Additional information <#additional> PTF MH01622 This package includes fixes for HMC Version 7 Release 7.9.0 Service Pack 3. You can reference this package by APAR MB04007 and PTF MH01622. This image must be installed on top of HMC Version 7 Release 7.9.0 Service Pack 3 (MH01546). Note: This PTF supersedes MH01597, MH01605, and MH01610. /Package information/ Package name Size Checksum (sha1sum) APAR# PTF# MH01622.iso 1950355456 8e660f29413e180df2124b7f1bfa539ad124a64d MB04007 MH01622 Splash Panel information (or lshmc -V output) * *"version= Version: 7 Release: 7.9.0 Service Pack: 3 HMC Build level 20160415.2 MH01597: security updates (01-19-2016) MH01587: Fix for HMC V7R7.9.0 (01-06-2016) MH01605: security updates (02-08-2016) MH01610: security updates (03-12-2016) MH01622: security updates (04-16-2016) ","base_version=V7R7.9.0 " List of fixes *Security Fixes* * Fixed the following openssl security vulnerabilities: CVE-2015-3197, CVE-2016-0702, CVE-2016-0705, CVE-2016-0797 * Fixed Tomcat vulnerabilities: CVE 2015-5174,CVE-2015-5345, CVE-2015-5346, CVE-2015-5351, CVE-2016-0706, CVE-2016-0714, CVE-2016-0763 * Fixed Vulnerabilities in bind: CVE-2016-1285 and CVE-2016-1286 * Fixed security vulnerability with Strongswan: CVE-2015-8023 * Fixed a security issue with HMC restricted shell. **Repair and Verify Fixes * * * Fixed a Repair & Verify issue on systems utilizing the 24 inch frame with a power subsystem where users can experience a failure of concurrent service maintenance activities on power components within the CEC enclosure, the Power Subsystem enclosure, and any installed I/O devices within the frame. Servers impacted include the POWER 575, 590, 595, 795: Models 9125-F2A,F2B,F2C; 9118-575; 9119-590,595,FHA,FHB; 9406-595. Errors include: "/An internal error occurred when the management console // //attempted to validate the service network. Some or all of the // //required network resources may not be available. Contact your // //next level of support for problem determination/." and "/Redundancy status could not be determined for the FRU in // //location: // //U5791.001.XXXXXXX-Ex" (example) // // // //The FRU cannot be exchanged concurrently. The IO Drawer must be// //powered off and partitions may need to be shut down to continue// //the repair. /" **General Fixes* * * Fixed an issue where serviceable event E212E115 may be reported against rmcd during performance information transmission. * Fixed a rare deadlock issue that required a HMC reboot to recover. Symptoms include unable to login GUI remotely; CLI commands fail with "/command server failed/" errors; partition mobility failing with H/SCLA200 An unknown error occurred during the partition migration. / *Previously released fixes also included in this PTF: * * MH01610* 03/15/16 * Fixed a Java security issue: CVE-2016-0448 * Fixed security vulnerabilities in glibc: CVE-2015-7547, CVE-2014-9761, CVE-2015-8776, CVE-2015-8777, CVE-2015-8778 and CVE-2015-8779 * Enabled all TLS protocols on vterm(9960), FCS(9920) and remote web access(12443) ports. * Fixed an issue during Remote Restart to prevent the lpars going into open firmware state on the target managed system because storage mappings/adapters were missing. The HMC will now report a valid error when an exception is hit and will display the correct Remote Restart status. * MH01605* 02/17/16 * Fixed multiple OpenSSH vulnerabilities involving the ssh client "Roaming" feature: CVE-2016-0777 and CVE-2016-0778 * Fixed multiple Vulnerabilities in NTP : CVE-2015-7691, CVE-2015-7692, CVE-2015-7701, CVE-2015-7702, CVE-2015-7703, CVE-2015-7704, CVE-2015-7705, CVE-2015-7848, CVE-2015-7849, CVE-2015-7850, CVE-2015-7851, CVE-2015-7852, CVE-2015-7853, CVE-2015-7854, CVE-2015-7855, and CVE-2015-7871 * Fixed an issue where the managed servers go to an Incomplete state when the RMC interface has a blank (null) ipv4 or ipv6 value. * Fixed an issue where /var may fill up with core dumps when Pegasus server is enabled and in use by a remote client. * MH01597* 1/25/16 * Fixed multiple OpenSSL Vulnerabilities: CVE-2015-3193, CVE-2015-3194, CVE-2015-3195, CVE-2015-3196, and CVE-2015-1794 * Fixed multiple Java Vulnerabilities: CVE-2015-4843, CVE-2015-4868, CVE-2015-4806, CVE-2015-4872, CVE-2015-4911, CVE-2015-4893, CVE-2015-4842, and CVE-2015-4803 * Fixed an issue where the HMC web server may intermittently deadlock. Symptoms include one or more of the following: unable to connect using a browser; browser error "Service Temporarily Unavailable"'; multiple serviceable events for E35A0016 and/or E35A0017; unable to restart due to / file system full from repeated diagnostic dumps. Back to top <#ibm-content> Installation Installation instructions for HMC Version 7 upgrades, updates and corrective service can be found at these locations: Installation methods for HMC Version 7 updates and fixes Upgrading or restoring HMC Version 7 Instructions and images for upgrading via a remote network install can be found here (for all HMC releases): HMC network installation images Additional information Notes: 1. The Install Corrective Service task now allows you to install corrective service updates from the ISO image files of these updates. You can download these ISO image files for the HMC, and then use the ISO image file to install the corrective service update. You no longer need to burn CD-R or DVD-R media to use the ISO image file to install corrective service. 2. This image requires DVD -R media. 3. To install updates over the network, select the *.iso file on the "Select Service Package" panel of the Install Corrective Service task. The HMC application extracts the files needed to install the corrective service. If you are using USB flash media, copy the *.iso file to the flash media, and then select the file when prompted. 4. The *updhmc* command line command has also been modified to use the *.iso file. To use the command, follow the syntax in this example: updhmc -t s -h -f -u -i In all cases, the HMC application extracts the files needed to install the corrective service. Back to top <#ibm-content>