Hardware Management Console Readme

For use with HMC Version 7 Release 7.7.0 Service Pack 3

 


      Contents

The information in this Readme contains fix list and other package
information about the Hardware Management Console.

  * PTF MH01400 <#MH01400>
  * Package information <#package>
  * List of fixes <#fixes>
  * Installation <#install>
  * Additional information <#additional>


    PTF MH01400

This package includes a fix for HMC Version 7 Release 7.7.0 Service Pack
3.  You can reference this package by APAR# MB03768.  This image can be
installed on top of HMC HMC V7 Release 7.7.0 Serivce Pack 3 with/without
additional PTFs installed.

*Note:*  IBM Flex Power Compute Nodes can be managed by HMC V7R7.0 SP3
if the Compute Nodes' firmware is at 01AF773_051.  However, unlike IBM
Flex System Manager 1.3.1, HMC does not provide TLS 1.2 support with
this firmware level.

/Package information/ Package name 	Size 	Checksum (sha1sum) 	APAR# 	PTF#
MH01400.iso 	997588992 0572b0aa1163148f5bacc79024c61ed4e85091af 	
	MB03768 	MH01400
Splash Panel information (or lshmc -V output)

"version= Version: 7
 Release: 7.7.0
 Service Pack: 3
HMC Build level 20140204.1
MH01400: Fix for HMC V7R7.7.0 SP3 (02-26-2014)
","base_version=V7R7.7.0
"


    List of fixes

*This package includes the following enhancements and fixes:*

  * Fixed an issue with IVM to HMC migration when the supported
    max_vlans_per_port is lower on HMC (20) than IVM (21).
  * Fixed an issue when processors are stolen from the shared processor
    pool that can result  in an activation failing with error HSCL1473:
    Cannot perform atomic operation. Atomic operations are not enabled.
    The problem occurs when processor stealing was performed for an
    earlier activation, and lpars are in a non-default SSP. 
  * Fixed an issue  where the iSAS mode enablement (used by
    PureApplication solutions) was not persisted on an upgrade.   
  * Fixed a failure in LPM migration and recovery  where if the
    query_migration command contains non-printable characters it causes
    a memory segmentation fault in IBM.LparCmdRM.
  * Fixed an issue where menu options for Servers, Frames, and System
    Plans are not displayed in the WebUI due to user profile corruption.
  * Fixed an issue where  LPM migration may fail due to redundant
    configuration of multiple virtual SCSI and FC adapters resulting in
    message HSCL9001 The operation has failed on the managed system.
  * Added a Save Area Metering tool via command lsprofspace to display
    the current usage of the partition/profile  configuration data
    storage space. 
  * Fixed an issue where a customer can not generate a CSR based on the
    Common name using the HMC GUI; instead of using the Common name it
    generates a FQDN.
  * Fixed an issue of GUI failing to load with  HTTP status code as 500
    on an upgrade after restoring corrupted save upgrade data.
  * Fixed an issue in opening local HMC ASMI for frames or managed
    systems that results in a blank white window.
  * Fixed an issue in hmcshutdown command returning an incorrect return
    code of 1 instead of 0.


Back to top <#ibm-content>


    Installation

Installation instructions for HMC Version 7 upgrades, updates and
corrective service can be found at these locations:

Installation methods for HMC Version 7 updates and fixes
<http://www.ibm.com/support/docview.wss?uid=isg3T1012427>

Upgrading or restoring HMC Version 7
<//www.ibm.com/support/docview.wss?uid=isg3T1012390>

Instructions and images for upgrading via a remote network install can
be found here (for all HMC releases):

HMC network installation images
<//www14.software.ibm.com/webapp/set2/sas/f/netinstall/home.html>


    Additional information


      Notes:

 1. The Install Corrective Service task now allows you to install
    corrective service updates from the ISO image files of these
    updates. You can download these ISO image files for the HMC, and
    then use the ISO image file to install the corrective service
    update. You no longer need to burn CD-R or DVD-R media to use the
    ISO image file to install corrective service.
 2. This image requires DVD -R media.
 3. To install updates over the network, select the *.iso file on the
    "Select Service Package" panel of the Install Corrective Service
    task. The HMC application extracts the files needed to install the
    corrective service. If you are using USB flash media, copy the *.iso
    file to the flash media, and then select the file when prompted.
 4. The *updhmc* command line command has also been modified to use the
    *.iso file. To use the command, follow the syntax in this example:
    updhmc -t s -h <myservername> -f
    </home/updates/corrrective_service.iso> -u <HMC_username> -i

In all cases, the HMC application extracts the files needed to install
the corrective service.

Back to top <#ibm-content>