Hardware Management Console Readme

For use with Version 7 Release 7.8.0


      Contents

The information in this Readme contains fix list and other package
information about the Hardware Management Console.

  * PTF MH01396 <#MH01386>
  * Package information <#package>
  * List of fixes <#fixes>
  * Installation <#install>
  * Additional information <#additional>


    PTF MH01396

This package includes fixes for HMC Version 7 Release 7.8.0.  You can
reference this package by APAR# MB03764.  This image must be installed
on top of HMC Version 7 Release 7.8.0 with Mandatory PTF MH01388 APAR#
MB03754. 

*Note:*  This eFix is intended for users of the PowerVC product.


/Package information/ Package name 	Size 	Checksum (sha1sum) 	APAR# 	PTF#
MH01396.iso 	257857536 	1c0ee5463ed8dbe848ef5eaf0fc3382528c386d7
	MB03764 	MH01396
Splash Panel information (or lshmc -V output)
"version= Version: 7
Release: 7.8.0
Service Pack: 0
HMC Build level 20131123.1
MH01388: Required fix for HMC V7R7.8.0 (11-25-2013)
MH01396: Fix for HMC V7R7.8.0 (12-10-2013)
","base_version=V7R7.8.0.0
"


    List of fixes

This package includes the following fixes:

  * Fixed an issue when creating a new virtual adapter may have resulted
    in a missing association to the expected trunk adapter and in the
    load group missing from the network bridge.
  * Fixed an issue where certain GUI operations failed with HTTP Status
    of 400.


Back to top <#ibm-content>


    Installation

Installation instructions for HMC Version 7 upgrades, updates and
corrective service can be found at these locations:

Installation methods for HMC Version 7 updates and fixes
<http://www.ibm.com/support/docview.wss?uid=isg3T1012427>

Upgrading or restoring HMC Version 7
<//www.ibm.com/support/docview.wss?uid=isg3T1012390>

Instructions and images for upgrading via a remote network install can
be found here (for all HMC releases):

HMC network installation images
<//www14.software.ibm.com/webapp/set2/sas/f/netinstall/home.html>


    Additional information


      Notes:

 1. The Install Corrective Service task now allows you to install
    corrective service updates from the ISO image files of these
    updates. You can download these ISO image files for the HMC, and
    then use the ISO image file to install the corrective service
    update. You no longer need to burn CD-R or DVD-R media to use the
    ISO image file to install corrective service.
 2. This image requires DVD -R media.
 3. To install updates over the network, select the *.iso file on the
    "Select Service Package" panel of the Install Corrective Service
    task. The HMC application extracts the files needed to install the
    corrective service. If you are using USB flash media, copy the *.iso
    file to the flash media, and then select the file when prompted.
 4. The *updhmc* command line command has also been modified to use the
    *.iso file. To use the command, follow the syntax in this example:
    updhmc -t s -h <myservername> -f
    </home/updates/corrrective_service.iso> -u <HMC_username> -i

In all cases, the HMC application extracts the files needed to install
the corrective service.

Back to top <#ibm-content>