========================================================================= Readme file for IBM Systems Director Platform Agent Version 6.2 Platform Agent Software Installable: SysDir6_2_Platform_Agent_Windows.zip IBM Corp. 30 May 2010 ========================================================================= CONTENTS 1.0 Overview 2.0 Prerequisites and co-requisites 3.0 Installation Information 3.1 Prior to installation 3.2 Install 3.3 Perform the necessary tasks after installation 3.4 Troubleshoot Installation from Support Site 4.0 Uninstalling 5.0 List of changes included 5.1 Defects Corrected 5.2 Authorized Program Analysis Reports 5.3 Product Enhancements 5.4 Known Issues 6.0 Copyright and trademark information 1.0 Overview This is an update release for IBM Systems Director Platform Agent. Platform Agent is a component of IBM Systems Director that is installed on a managed system to provide hardware-specific function that supports communication and administration of the managed system by IBM Systems Director Server. See section 5 for a list of items updated. 2.0 Prerequisites and co-requisites There are no IBM Systems Director component pre-requisites. For hardware and operating system pre-requisites reference the IBM Systems Director infocenter center on the Web at the section titled "Hardware and software requirements": http://publib.boulder.ibm.com/infocenter/director/v6r2x/topic/com.ibm.director.plan.helps.doc/fqm0_r_supported_hardware_and_software_requirements.html 3.0 Installation information 3.1 Prior to installation If you downloaded from ibm.com, you must import the update before you can install it using Update Manager. If you acquired the files using Update Manager, the update has already been imported. To import the update from the command-line, use the following command: smcli importupd -vr To import the update from the IBM Systems Director Web interface, perform these steps: 1. In navigation area, expand Release Management and click Updates. The Update Summary page displays. 2. In the Common Tasks section, click Import updates. The Import Updates page is displayed. 3. Type the directory of the update files on the management server in the Path field. All updates in the specified directory will be copied to the update library. You cannot select specific updates from this directory. 4. Click OK. The scheduler is displayed. Choose to run the task now or schedule it to run in the future. For a complete reference to the Update Manager procedures, see the IBM Systems Director information center on the Web for the section titled "Updating systems": http://publib.boulder.ibm.com/infocenter/director/v6r2x/topic/com.ibm.director.updates.helps.doc/fqm0_t_um_updating_systems.html 3.2 Install To install the update from the command-line, use the following command: smcli installupd [-n | -N ] -u SysDir6_2_Platform_Agent_Windows To install the update from the IBM Systems Director Web interface, perform these steps: 1. In navigation area, expand Release Management and click Updates. The Update Summary page displays. 2. In the Common Tasks section, click Install updates. The Install Wizard is displayed. 3. Follow the steps in the Install Wizard to install the update. 3.3 Perform the necessary tasks after install Restart the management server or managed systems on which the update has been applied. 3.4 Troubleshooting the installation For information about troubleshooting problems you encounter during installation, see the IBM Systems Director information center on the Web at: http://publib.boulder.ibm.com/infocenter/director/v6r2x/topic/com.ibm.director.tbs.helps.doc/fqm0_r_tbs_solving_problems.html 4.0 Uninstalling The update cannot be uninstalled from the command-line. To uninstall the IBM Systems Director Platform Agent, refer to the IBM Systems Director information center on the Web for instructions in the section "Uninstalling IBM Systems Director": http://publib.boulder.ibm.com/infocenter/director/v6r2x/topic/com.ibm.director.install.helps.doc/fqm0_t_installing_main.html 5.0 List of changes included 5.1 Defects corrected (reported by customers) for both Windows and Linux defectID Version Problem Corrected -------- ------- ------------------- 136453 6.1.2 Director 6.1.2/6.2 does not show disk free info (ESX 4.0.2) 140413 6.1.2 Sensor queries on Platform Agent times-out under Windows 2008 140572 6.1.2 IBM Director 6.1.2 not persisting VMware service types 146863 6.1.2 need sybol files for hunter4 release to debug customer issues 147118 6.1.2 HEALTH MIB needs updated descriptions 147721 6.1.2 cimserver fails to start in multinode athena setup 148690 6.1.2 Segfault when installing IBM Director 6.2 on VMware ESX 4.x 148694 6.1.2 LSIESG: adapter error to load IR2 lib msg when installing 148695 6.1.2 BMC FW ver displ. for the host in ISD srv home page wrong 150419 6.1.2 System Director Platform Agent V2 MIBs missing descriptions Additional defects have been corrected during internal maintenance. 5.2 Authorized Program Analysis Reports The following Authorized Program Analysis Reports (APARs) were resolved: IC63550 Sensor queries timeout on Windows Server 2008 Platform Agents. IC65962 SLP discovery of Platform Agents fails. IC66699 Upgrading the Platform Agent from 6.1.1 fails. IC66905 Need descriptions for SNMP V2 MIBs that were added. IC66905 Update the IBM-SYSTEM-HEALTH-MIB.mib descriptions. IC68049 Multipe duplicate events are recevied from Platform Agents installed on DBCS systems. IC68550 Platform Agent eventually becomes unresponsive due to a handle leak. 5.3 Product enhancements The following list provides information about new features and enhancements in IBM Systems Director Platform Agent 6.2: In addition to the previous CIM Providers installed with the previous release 6.1.2: LSI MR CIM Provider QLogic CNA CIM Provider Brocade CNA Adapter CIM Provider Two new CIM Providers are installed with this release 6.2: Aristos (Adaptec) RSSM CIM Provider HCL (Adaptec) ServeRAID CIM Provider 5.4 Known Issues You cannot uninstall the 6.2 IBM Systems Director Platform Agent update through IBM Systems Director. Refer to the IBM Systems Director information center on the Web for instructions in the section "Uninstalling IBM Systems Director": http://publib.boulder.ibm.com/infocenter/director/v6r2x/topic/com.ibm.director.install.helps.doc/fqm0_t_installing_main.html IBM recommends you restart the Operating System after performing an install, uninstall, or install upgrade. After an install or uninstall you should contact IBM Service if you see the following type of error in the log file 'C:\Windows\platinst*.log': MofcompExecute: Error; mofcomp.exe for '*.mof'failed with return code '259' This release of the 6.2 IBM Systems Director Platform Agent: dated 30 May 2010 build number rc4045 will fix the above type of error in the log file occuring with the previous release dated 20 October 2009 build number rc3042. 6.0 Copyright and trademark information www.ibm.com/legal/copytrade.shtml The following terms are trademarks of International Business Machines Corporation in the United States, other countries, or both: IBM Other company, product, or service names may be trademarks or service marks of others. Notices INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. THIRD-PARTY LICENSE TERMS AND CONDITIONS, NOTICES AND INFORMATION The license agreement for this product refers you to this file for details concerning terms and conditions applicable to third party software code included in this product, and for certain notices and other information IBM must provide to you under its license to certain software code. The relevant terms and conditions, notices and other information are provided or referenced below. Please note that any non-English version of the licenses below is unofficial and is provided to you for your convenience only. The English version of the licenses below, provided as part of the English version of this file, is the official version. Notwithstanding the terms and conditions of any other agreement you may have with IBM or any of its related or affiliated entities (collectively "IBM"), the third party software code identified below are "Excluded Components" and are subject to the following terms and conditions: * the Excluded Components are provided on an "AS IS" basis * IBM DISCLAIMS ANY AND ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS WITH RESPECT TO THE EXCLUDED COMPONENTS, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NON-INFRINGEMENT OR INTERFERENCE AND THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * IBM will not be liable to you or indemnify you for any claims related to the Excluded Components * IBM will not be liable for any direct, indirect, incidental, special, exemplary, punitive or consequential damages with respect to the Excluded Components.