The information in this Readme contains fix list and other package information about the Systems Director Management Console.

• PTF MF53525 SDMC V6.730.0 description and version information
• List of fixes
• Known issues
• Additional information
• Installation

This package updates SDMC V6.730 with the PTF fix pack MF53525. You can also reference this package by APAR MB03526.

You can only apply this fix to the following PTF:

Run the lsconfig -V command to get version information, and to check for a successful installation of this corrective service package. After applying this fix, the output of this command is:

This package includes the following fixes:

• Fixed an error that occurred, which prevented the operation, when Exchange FRU on a PUBook was performed on the 9119-FHB (Power 795) server.
• Added support for different keyboards. The cfgkbd command, run with no parameters lists all international keyboards supported by SDMC.
• Removed old Mozilla Firefox browser session settings from the local console.
• Ensured disk sync occurs immediately prior to snapshot during a backup of the hardware appliance.

This package has the following known issues.

Applying the fix pack with the USB Key

Execute this procedure while running as user sysadmin

Software appliance users must ensure that the USB device is available to the SDMC virtual machine.

1. Attach the USB key to the appliance
2. Identify the mount point by running the following command:
   lsmediadev
   
   Sample result
   device=/dev/cdrom,mount_point=/media/cdrom,type=1,description=CD/DVD
   device=/dev/vdh1,mount_point=/media/vdh1,type=3,description=USB flash memory device</li>
3. Mount the USB key by running the following commands. Use the mount_point listed in the lsmediadev command output.
   mount /media/vdh1
   ls /media/vdh1
   
   The ls /media/vdh1 command output should include the following:
   ifixMF53525
   
   (The following step assumes that all of the update files are in the ifixMF53525 directory on the USB key.)
4. Create an update directory and copy the USB contents to the update directory by running the following commands:
   mkdir -p updates
   cp /media/vdh1/ifixMF53525/* updates/
   umount /media/vdh1
5. Install the mandatory updates by executing the following commands:
   SYSNAME=`smcli lssys -t OperatingSystem -w "OSType=23"`
   echo $SYSNAME
     (The output should display the hostname of your SDMC appliance)
   smcli installneeded -n $SYSNAME -v -F /home/sysadmin/updates
   smshutdown -t now -r

Refer to the following location for instructions on installing SDMC V6.730 updates and fixes:

Installation methods for SDMC Version 730 updates and fixes

Refer to the following location for instructions on installing SDMC V6.730:

Installing or restoring SDMC Version 730